Export limit exceeded: 424025 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (424025 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74953 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.8 High |
| Privilege escalation in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74941 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.8 High |
| Privilege escalation in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-18249 | 1 Ibm | 1 I | 2026-08-19 | 8.4 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of pointers read from Java-controlled addresses. | ||||
| CVE-2026-18193 | 1 Ibm | 1 I | 2026-08-19 | 8.9 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to bypass security restrictions due to improper validation of user-controlled addresses. | ||||
| CVE-2026-17476 | 1 Ibm | 1 I | 2026-08-19 | 4.8 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an improper buffer write. | ||||
| CVE-2026-18101 | 1 Ibm | 1 I | 2026-08-19 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to gain elevated privileges due to improper management of thread authority swaps. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-72181 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mips: sched: Fix CPUMASK_OFFSTACK memory corruption This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data directly into the allocated buffer. | ||||
| CVE-2026-18086 | 1 Ibm | 1 I | 2026-08-19 | 4.5 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to execute arbitrary code or cause a denial of service due to improper bounds checking. | ||||
| CVE-2026-18077 | 1 Ibm | 1 I | 2026-08-19 | 7.5 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to a stack-based buffer overflow. | ||||
| CVE-2026-18068 | 1 Ibm | 1 I | 2026-08-19 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to a byte-count and element-count confusion. | ||||
| CVE-2026-18020 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an off-by-one error in bounds checking. | ||||
| CVE-2026-17502 | 1 Ibm | 1 I | 2026-08-19 | 8.6 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds write. | ||||
| CVE-2026-68411 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length/header checks in hwsim_virtio_handle_cmd() and is dropped, so truncating rather than dropping here cannot be turned into a parsing problem. | ||||
| CVE-2026-17649 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-68407 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error. | ||||
| CVE-2026-68395 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. | ||||
| CVE-2026-68370 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the "emulated single-request FIFO" fast-path in dummy_queue() reuses for small IN transfers: it copies the caller's request into it (req->req = *_req) and queues it, treating list_empty(&fifo_req.queue) as "the slot is free". The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows the standard pattern: list_del_init(&req->queue) unlinks the request, then the lock is dropped and usb_gadget_giveback_request() invokes req->complete(). But list_del_init() makes fifo_req.queue look empty *before* the completion callback returns, so a concurrent dummy_queue() on another CPU sees the slot as free, reuses fifo_req and runs req->req = *_req -- overwriting req->complete while dummy_timer is mid-calling it. The indirect call then jumps to a clobbered pointer, causing a general protection fault / page fault in dummy_timer (syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an in-bounds memcpy on a live shared object, so KASAN cannot flag it. Add a fifo_req_busy bit covering the shared request's whole lifetime: set it in dummy_queue() when the FIFO fast-path takes fifo_req (making it the fast-path guard, replacing the list_empty(&fifo_req.queue) test), and clear it after the completion callback has returned, via a dummy_giveback() helper used at all four gadget-request giveback sites. The shared slot can no longer be reused until its completion callback has finished. | ||||
| CVE-2026-68369 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||