Search
Search Results (12 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80212 | 1 Ruby | 1 Resolv | 2026-08-28 | 7.5 High |
| An issue was discovered in the resolv gem before 0.7.2 for Ruby. Resolv::DNS::Resource.get_class, Resolv::DNS::Resource::Generic.create, and Resolv::DNS::SvcParam::Generic.create generate a new class for each unknown DNS resource record (type, class) pair, or each unknown SvcParamKey, encountered while decoding a response. Each generated class was permanently registered both as a constant on Resource (or SvcParam::Generic) and as an entry in a class-lookup hash (ClassHash), and thus the class remained reachable through that constant after the response was discarded. Type and class are each 16-bit values, and thus an attacker controlling DNS responses (a spoofed response, or a malicious or hijacked upstream DNS server) has roughly 2^32 distinct (type, class) pairs to choose from. A single response of a few hundred kilobytes carrying tens of thousands of distinct unknown types permanently grows process memory by tens of megabytes; repeated responses accumulate without bound and are never reclaimed by garbage collection, because the constant keeps each class alive. Any code path that calls Resolv::DNS::Message.decode on attacker-influenced DNS responses is affected. resolv is a default gem, and thus this is reachable from a plain Ruby installation without any additional dependency. | ||||
| CVE-2026-80213 | 1 Ruby | 1 Resolv | 2026-08-28 | 4 Medium |
| An issue was discovered in the resolv gem before 0.7.2 for Ruby. Resolv::DNS::MessageEncoder wrote a DNS label's length into a single octet without checking its range. A label longer than 255 octets had its length stored modulo 256 but the label data was written unchanged, and thus the bytes on the wire described a different name than the one the application asked to encode. RFC 1035 section 2.3.4 limits a label to 63 octets, and the two high bits of the length octet are reserved for compression pointers. put_string packed the length with put_pack("C", d.length) and put_label used it for labels, and thus any value from 0 to 255 could end up as a label length octet, including the reserved 0x40-0xBF range and the 0xC0-0xFF pointer range. Resolv::DNS::Name.create did not check per-label or total name length either, and thus an attacker-controlled hostname reached the encoder unchanged. An application that resolves an attacker-controlled hostname sends a query whose wire bytes name a domain the attacker chose. A hostname suffix that the application validates against an allowlist becomes padding that never appears on the wire, and thus allowlist and egress checks can be bypassed. The recursive resolver caches the response under the attacker's name, and DNS logs record that name rather than the one the application asked for. A label length whose low octet lands in the 0xC0-0xFF range produces a length octet that conforming parsers read as the start of a compression pointer, with the following attacker-controlled byte as the offset. | ||||
| CVE-2026-33210 | 2 Ruby, Ruby-lang | 2 Json, Json | 2026-08-21 | 9.1 Critical |
| Ruby JSON is a JSON implementation for Ruby. From version 2.14.0 to before versions 2.15.2.1, 2.17.1.2, and 2.19.2, a format string injection vulnerability can lead to denial of service attacks or information disclosure, when the allow_duplicate_key: false parsing option is used to parse user supplied documents. This issue has been patched in versions 2.15.2.1, 2.17.1.2, and 2.19.2. | ||||
| CVE-2026-71847 | 1 Ruby | 1 Json | 2026-08-07 | N/A |
| Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2. | ||||
| CVE-2026-38969 | 1 Ruby | 1 Webrick | 2026-07-14 | 6.5 Medium |
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. | ||||
| CVE-2026-54696 | 1 Ruby | 1 Json | 2026-07-01 | 3.7 Low |
| Ruby JSON is a JSON implementation for Ruby. Versions 2.9.0 through 2.19.8 are vulnerable to heap buffer overflow when the JSON generator is provided with an oversized streamed object. When streaming to an IO JSON.dump(obj, io) and JSON::State#generate(obj, io) can write past the internal JSON generator buffer when a streamed object contains an attacker-controlled string near 16 KB. Exploitation would result in a reliable process crash/denial of service. This issue has been fixed in version 2.19.9. | ||||
| CVE-2026-27820 | 2 Ruby, Ruby-lang | 2 Zlib, Zlib | 2026-05-21 | 9.8 Critical |
| zlib is a Ruby interface for the zlib compression/decompression library. Versions 3.0.0 and below, 3.1.0, 3.1.1, 3.2.0 and 3.2.1 contain a buffer overflow vulnerability in the Zlib::GzipReader. The zstream_buffer_ungets function prepends caller-provided bytes ahead of previously produced output but fails to guarantee the backing Ruby string has enough capacity before the memmove shifts the existing data. This can lead to memory corruption when the buffer length exceeds capacity. This issue has been fixed in versions 3.0.1, 3.1.2 and 3.2.3. | ||||
| CVE-2026-41316 | 1 Ruby | 1 Erb | 2026-04-28 | 8.1 High |
| ERB is a templating system for Ruby. Ruby 2.7.0 (before ERB 2.2.0 was published on rubygems.org) introduced an `@_init` instance variable guard in `ERB#result` and `ERB#run` to prevent code execution when an ERB object is reconstructed via `Marshal.load` (deserialization). However, three other public methods that also evaluate `@src` via `eval()` were not given the same guard: `ERB#def_method`, `ERB#def_module`, and `ERB#def_class`. An attacker who can trigger `Marshal.load` on untrusted data in a Ruby application that has `erb` loaded can use `ERB#def_module` (zero-arg, default parameters) as a code execution sink, bypassing the `@_init` protection entirely. ERB 4.0.3.1, 4.0.4.1, 6.0.1.1, and 6.0.4 patch the issue. | ||||
| CVE-2024-27281 | 2 Redhat, Ruby | 2 Enterprise Linux, Rdoc | 2026-04-15 | 4.5 Medium |
| An issue was discovered in RDoc 6.3.3 through 6.6.2, as distributed in Ruby 3.x through 3.3.0. When parsing .rdoc_options (used for configuration in RDoc) as a YAML file, object injection and resultant remote code execution are possible because there are no restrictions on the classes that can be restored. (When loading the documentation cache, object injection and resultant remote code execution are also possible if there were a crafted cache.) The main fixed version is 6.6.3.1. For Ruby 3.0 users, a fixed version is rdoc 6.3.4.1. For Ruby 3.1 users, a fixed version is rdoc 6.4.1.1. For Ruby 3.2 users, a fixed version is rdoc 6.5.1.1. | ||||
| CVE-2024-49761 | 4 Netapp, Redhat, Ruby and 1 more | 9 Ontap Tools, Enterprise Linux, Rhel Aus and 6 more | 2025-11-03 | 7.5 High |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.3.9 has a ReDoS vulnerability when it parses an XML that has many digits between &# and x...; in a hex numeric character reference (&#x...;). This does not happen with Ruby 3.2 or later. Ruby 3.1 is the only affected maintained Ruby. The REXML gem 3.3.9 or later include the patch to fix the vulnerability. | ||||
| CVE-2025-58767 | 2 Ruby, Ruby-lang | 2 Rexml, Rexml | 2025-09-30 | 5.3 Medium |
| REXML is an XML toolkit for Ruby. The REXML gems from 3.3.3 to 3.4.1 has a DoS vulnerability when parsing XML containing multiple XML declarations. If you need to parse untrusted XMLs, you may be impacted to these vulnerabilities. The REXML gem 3.4.2 or later include the patches to fix these vulnerabilities. | ||||
| CVE-2025-6442 | 2 Ruby, Ruby-lang | 2 Webrick, Webrick | 2025-08-18 | 5.9 Medium |
| Ruby WEBrick read_header HTTP Request Smuggling Vulnerability. This vulnerability allows remote attackers to smuggle arbitrary HTTP requests on affected installations of Ruby WEBrick. This issue is exploitable when the product is deployed behind an HTTP proxy that fulfills specific conditions. The specific flaw exists within the read_headers method. The issue results from the inconsistent parsing of terminators of HTTP headers. An attacker can leverage this vulnerability to smuggle arbitrary HTTP requests. Was ZDI-CAN-21876. | ||||
Page 1 of 1.