Export limit exceeded: 385938 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (385938 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64061 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 | ||||
| CVE-2026-64062 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential deadlock in write-through mode Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests. | ||||
| CVE-2026-64063 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix streaming write being overwritten In order to avoid reading whilst writing, netfslib will allow "streaming writes" in which dirty data is stored directly into folios without reading them first. Such folios are marked dirty but may not be marked uptodate. If a folio is entirely written by a streaming write, uptodate will be set, otherwise it will have a netfs_folio struct attached to ->private recording the dirty region. In the event that a partially written streaming write page is to be overwritten entirely by a single write(), netfs_perform_write() will try to copy over it, but doesn't discard the netfs_folio if it succeeds; further, it doesn't correctly handle a partial copy that overwrites some of the dirty data. Fix this by the following: (1) If the folio is successfully overwritten, free the netfs_folio struct before marking the page uptodate. (2) If the copy to the folio partially fails, but short of the dirty data, just ignore the copy. (3) If the copy partially fails and overwrites some of the dirty data, accept the copy, update the netfs_folio struct to record the new data. If the folio is now filled, free the netfs_folio and set uptodate, otherwise return a partial write. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0 0x927c0 write 0x63fb8 0x53c8 0 copy_range 0xb704 0x19b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * write 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0x00000 0x20000 0x9157c read 0x20000 0x20000 0x9157c read 0x40000 0x20000 0x9157c read 0x60000 0x20000 0x9157c read 0x7e1a0 0xcfb9 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. | ||||
| CVE-2026-64045 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. | ||||
| CVE-2026-64046 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | ||||
| CVE-2026-64050 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/ | ||||
| CVE-2026-64051 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict] | ||||
| CVE-2026-84887 | 1 Simular-ai | 1 Agent-s | 2026-09-02 | 4.3 Medium |
| A vulnerability was identified in simular-ai Agent-S up to 0.3.2. Affected by this issue is some unknown functionality of the file grounding.py of the component Model-generated GUI Action Execution Workflow. The manipulation leads to denial of service. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-84886 | 1 Simular-ai | 1 Agent-s | 2026-09-02 | 5.3 Medium |
| A vulnerability was determined in simular-ai Agent-S up to 0.3.2. Affected by this vulnerability is the function ImageData of the file gui_agents/s1/utils/ocr_server.py of the component OCR HTTP API. Executing a manipulation of the argument img_bytes can lead to resource consumption. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-84885 | 1 Simular-ai | 1 Agent-s | 2026-09-02 | 4.3 Medium |
| A vulnerability has been found in simular-ai Agent-S 0.3.1/0.3.2. This impacts an unknown function of the file code_agent.py of the component CodeAgent. Such manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-84851 | 1 Amazon | 1 Ion-c | 2026-09-02 | 7.5 High |
| An uncontrolled recursion issue exists in Amazon Ion-C versions before 1.1.6 that might allow a remote unauthenticated actor to craft Ion data that exhausts the native call stack and crashes the application using the library, resulting in a denial of service. | ||||
| CVE-2026-81928 | 2026-09-02 | 7.5 High | ||
| Net::DNS versions before 1.57 for Perl allow memory exhaustion via unbounded recursion in sig_data when re-encoding a message with a misplaced TSIG record. sig_data signs a message by re-encoding it, and removes TSIG records only from the additional section. A TSIG decoded into the answer or authority section survives that step and is signed again, so encoding re-enters sig_data with no termination condition. Decoding does not reject such a message: a TSIG that is not the last record on the wire raises "misplaced or corrupt TSIG", but the error is caught, reported as a warning, and the record is left in the packet. RFC 8945 section 5.2 requires the message to be dropped. The recursion is reached only when the decoded TSIG carries an empty MAC, since a MAC recovered from the wire short-circuits the signing step. It is reached only from code that re-encodes a message it decoded, such as a forwarder or a proxy. A decoded message that is never re-encoded is unaffected. Message direction does not matter: a query reaches the same path as a response. Each cycle re-encodes the whole message, so fewer than 100 bytes on the wire exhaust available memory and terminate the process. | ||||
| CVE-2026-81205 | 1 Drupal | 1 Ldap / Active Directory Integration | 2026-09-02 | 5.3 Medium |
| Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability in Drupal LDAP / Active Directory Integration allows LDAP Injection. This issue affects LDAP / Active Directory Integration versions: from 0.0.0 to 2.2.1. | ||||
| CVE-2026-84857 | 1 Sigoden | 1 Aichat | 2026-09-02 | 5.3 Medium |
| A flaw has been found in sigoden aichat up to 0.30.4. This affects an unknown function of the file src/serve.rs of the component API Endpoint. This manipulation causes uncontrolled memory allocation. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-84856 | 1 Rowboatlabs | 1 Rowboat | 2026-09-02 | 5.3 Medium |
| A vulnerability was detected in rowboatlabs rowboat up to 0.9.1. The impacted element is the function request.text/req.json of the file apps/rowboat/app/api/composio/webhook/route.ts of the component Composio Webhook Endpoint. The manipulation results in denial of service. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 0.9.2 is sufficient to resolve this issue. Upgrading the affected component is recommended. The legacy Next.js app was deleted at 0.9.2 rather than patched, leaving no security control behind. | ||||
| CVE-2026-84452 | 2026-09-02 | N/A | ||
| Windows ML CLI is a command line tool for building portable, performant, and high-quality AI models for Windows ML. Prior to 0.4.0, the src/winml/modelkit/serve/cli_api.py component exposes WinML CLI commands through a localhost HTTP API without authentication and configures the allow_origins setting as a wildcard in both src/winml/modelkit/serve/cli_api.py and src/winml/modelkit/serve/app.py. A malicious website loaded by a user can send cross-origin requests to /v1/cli/build or /v1/cli/config and set the trust_remote_code parameter to true, which is converted to the --trust-remote-code command-line flag without validation. This reaches AutoConfig.from_pretrained with trust_remote_code=True in src/winml/modelkit/loader/_autoconfig.py and imports Python code from an attacker-controlled model repository, resulting in arbitrary code execution as the server user. This issue is fixed in version 0.4.0. | ||||
| CVE-2026-84840 | 1 Tsi-coop | 1 Tsi-dpdp-cms | 2026-09-02 | 6.5 Medium |
| A vulnerability was identified in tsi-coop tsi-dpdp-cms up to 0.5.0. This affects an unknown part of the file InterceptingFilter.java of the component Bootstrap Setup Endpoint. The manipulation leads to missing authentication. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 0.5.1 is able to mitigate this issue. Upgrading the affected component is recommended. | ||||
| CVE-2026-84810 | 2026-09-02 | 6.5 Medium | ||
| claude-skill-antivirus fails to analyze executable files when scanning local skill directories, reading only SKILL.md while ignoring Python source, bytecode, and other artifacts in the scripts directory. Attackers can distribute skills with malicious code in non-manifest files that receive a SAFE verdict with 100/100 trust score despite containing unanalyzed executable payloads. | ||||
| CVE-2026-84380 | 2026-09-02 | 5.6 Medium | ||
| HTTPX2 is a next generation HTTP client for Python. Prior to 2.11.0, Request._prepare() in src/httpx2/httpx2/_models.py can add a body-derived Content-Length header to a request that already contains a caller-supplied Transfer-Encoding header because its setdefault() processing checks each default header independently rather than treating the two framing headers as mutually exclusive. Fixed-size byte, JSON, form, and known-length multipart bodies can therefore be serialized over HTTP/1.1 with both headers, allowing request smuggling or connection desynchronization when downstream intermediaries disagree about which framing header takes precedence. This issue is fixed in version 2.11.0. | ||||
| CVE-2026-84378 | 2026-09-02 | 5.9 Medium | ||
| HTTPX2 is a next generation HTTP client for Python. From 2.5.0 until 2.10.0, the HTTPX2 Server-Sent Events parser in src/httpx2/httpx2/_sse.py repeatedly copies and rescans buffered text in _SSELineDecoder.decode() when an attacker-controlled or compromised SSE endpoint splits one unterminated line across many response chunks. The behavior affects httpx2.Client.sse() and httpx2.AsyncClient.sse(), and the total processing work grows quadratically with the line length, allowing a crafted stream to consume excessive CPU and block a synchronous worker or asynchronous event loop. This issue is fixed in version 2.10.0. | ||||