Export limit exceeded: 26095 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26095 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99145 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change Pinned bos have their pages removed from the shrinker's shrinkable / purgeable counts on pin, and added back on unpin according to the bo's purgeable state at that time. However, xe_bo_set_purgeable_shrinker() unconditionally transfers pages between the shrinkable and purgeable counts. If the purgeable state of a pinned bo changes, for example by userspace madvising DONTNEED on a VMA of a bo that is also pinned as a scanout buffer, this underflows one count and, after unpin, leaves the other one permanently inflated. Only update the purgeable flag for pinned bos, and leave the page accounting to unpin. (cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3) | ||||
| CVE-2026-99102 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setattr_size() ntfs_setattr_size() updates i_size and resizes the on-disk attribute without holding mapping->invalidate_lock. Page faults take the lock shared, so a fault racing the resize can resolve a VCN against the transient runlist state of ntfs_non_resident_attr_expand() and fail with a spurious SIGBUS, and can interleave with the size-change epilogue (truncate_pagecache(), i_size_write(), pagecache_isize_extended()). Take invalidate_lock exclusively around the whole resize after inode_dio_wait(), matching the fallocate path and other filesystems such as xfs, which wraps truncate in its mmaplock (= invalidate_lock). | ||||
| CVE-2026-99120 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes When running Hyper-V from Windows 11, KVM is seeing the SS bit set in nested page fault error codes produced for shadowed NPT. The AMD manual is unclear about when SS is set, including whether it can be set when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field of the VMCB. Nevertheless, the unexpected SS bit causes out of bounds accesses in permission_fault(), seen as either WARNs or UBSAN reports: kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27 kernel: index 34 is out of range for type 'u16 [16]' (in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the report shows SS|U|W happening as well). Fix the handling of unknown error codes by dropping SS and (with a WARN) any bits not among those that permission_fault() expects to receive. At the same time, given the uncertainty about when hardware sets SS, follow the processor's behavior when constructing the fault's error code, and preserve the SS bit as passed to FNAME(walk_addr_generic). While the behavior is surprising, there's a possibility that Hyper-V expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!), so retain the information when reflecting the fault to L1 instead of unconditionally discarding it. Bisection shows that this started happening with commit 687ee95c1b6d ("KVM: nSVM: enable GMET for guests"), even though SHSTK was available to guests since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET) somehow enables reporting the SS bit; rather, it's simply that Hyper-V never uses CET unless GMET is also present. The WARN is reproducible even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase to ensure that the first access to the shadow stack triggers a page fault. | ||||
| CVE-2026-98148 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit | ||||
| CVE-2026-98141 | 1 Linux | 1 Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller. | ||||
| CVE-2026-98142 | 1 Linux | 1 Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: <TASK> iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. | ||||
| CVE-2026-98147 | 1 Linux | 1 Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure. | ||||
| CVE-2026-99084 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock. | ||||
| CVE-2026-99090 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) | ||||
| CVE-2026-99092 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map(). | ||||
| CVE-2026-98908 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-99086 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed. | ||||
| CVE-2026-98905 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||
| CVE-2026-98907 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: protect sb_write_pointer() with invalidate lock sb_write_pointer() reads the super block from the block device page cache using read_cache_page_gfp(). This has the same race with BLKBSZSET as the one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set block size"). Take the mapping invalidate lock around read_cache_page_gfp() to serialize the read against block size changes. | ||||
| CVE-2026-98909 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: unregister devlink on port registration failure cpsw_probe() registers devlink before registering the CPSW ports. If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed. Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails. | ||||
| CVE-2026-98910 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Unwind debug trap enable on copy_to_user failure If kfd_dbg_trap_enable() fails while copying runtime_info to userspace, it had already activated the trap, set debug_trap_enabled, taken an extra process reference, and opened the debug event file. Return -EFAULT without unwinding that state, leaving inconsistent trap state and a refcount imbalance that could break later DISABLE/ENABLE. On copy_to_user failure, deactivate the trap and undo the rest of the enable setup before returning. | ||||
| CVE-2026-99060 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured the third request over the air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer also completed without a reset. | ||||
| CVE-2026-99062 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit. | ||||
| CVE-2026-99064 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together. | ||||
| CVE-2026-99065 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem. | ||||