Export limit exceeded: 22790 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22790 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80715 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379. | ||||
| CVE-2026-80697 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly. | ||||
| CVE-2026-80567 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred. | ||||
| CVE-2026-80571 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak In papr_phy_attest_create_handle(), the params->cmd.length is not validated before use, which can result in a buffer overlow. Check it and return -EINVAL if it is either 0 or exceeds sizeof(params->cmd). Also, params is freed on the success path but not error. Free it on errors after memory allocation. And free it on negative fd. | ||||
| CVE-2026-80575 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: cs40l50-vibra - validate custom data from user space cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect straight from the ff_effect the user passed to EVIOCSFF, without requiring it to hold anything: work_data.custom_data = memdup_array_user(periodic->custom_data, periodic->custom_len, sizeof(s16)); work_data.custom_len = periodic->custom_len; The driver then reads two words out of that buffer: custom_data[0] as the waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the index within the bank in cs40l50_effect_index_set(). Neither read is covered by a length check, and custom_len is fully user controlled: - custom_len == 0 makes memdup_array_user() call memdup_user() with a length of zero, which returns ZERO_SIZE_PTR rather than an error, so custom_data[0] dereferences it. - custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps effect->type out of the OWT case, and custom_data[1] is then read one word past the allocation. The bank value itself is also mishandled. It is masked with CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a custom_data[0] of 0x8000 or above wraps to a negative value that passes the "bank_type >= CS40L50_WVFRM_BANK_NUM" test. cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the switch statement's default case gets a chance to reject it: base_index = vib->dsp.banks[effect->type].base_index; max_index = vib->dsp.banks[effect->type].max_index; Require the two words the driver reads to be present, and hold the masked bank in a u32 so the existing upper-bound test covers the whole range. The da7280 haptic driver already range checks custom_len this way. | ||||
| CVE-2026-80579 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being removed. | ||||
| CVE-2026-80582 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/shmem_helper: Check VMA boundaries for PMD mappings In the ->huge_fault handler do not install a PMD huge page mapping if the huge page exceeds the boundaries of the VMA. All other ->huge_fault handlers have similar checks and the resulting mapping will trigger a VM_BUG_ON_VMA() if it ever reaches copy_pmd_range(). | ||||
| CVE-2026-80587 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. | ||||
| CVE-2026-80539 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: disallow multiple FENCE chunks in one submit amdgpu_cs_pass1() dispatches on chunk_id once per chunk without rejecting repeated ids. p->uf_bo is a single-slot field, so a submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs amdgpu_cs_p1_user_fence() twice, and the second run overwrites p->uf_bo with a freshly referenced BO without dropping the reference taken by the first. amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE chunk but the last leaks a BO reference. The leaked BO outlives handle close and process exit. Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did for p->bo_list. (cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) | ||||
| CVE-2026-80540 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix UVD decode image min size calculation This needs to use pitch instead of width. Also reject pitch over 4096 to avoid overflow. (cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) | ||||
| CVE-2026-80541 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate GEM_CREATE domain combinations AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK, but did not validate domain combinations. Userspace could combine CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and hit BUG_ON(). Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/ VRAM domains to be specified one at a time. Return -EINVAL for invalid combinations in amdgpu_gem_create_ioctl(). v2: Rename helper from amdgpu_gem_domain_valid() to amdgpu_gem_are_domains_valid() (Christian) (cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) | ||||
| CVE-2026-80551 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure first IDAW remains constant The first IDAW in a list does not need to be on a 2K/4K boundary like all others, and so is read separately to accurately calculate the size of the buffer needed to read the full IDAL. Verify that the address found in the first IDAW is unchanged between reads, to ensure a consistent set of IDAWs being worked with. | ||||
| CVE-2026-80554 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Limit the number of channel program segments The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program. The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive. | ||||
| CVE-2026-80563 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind The "trigger" debugfs file has a hand-rolled ->write handler (trigger_write()) that dereferences the per-device gpio_la_poll_priv. The file is created with debugfs_create_file_unsafe(), and the handler never takes a debugfs reference. Nothing keeps the object alive while the handler runs. priv is allocated with devm_kzalloc(). devres frees it when the platform device is unbound. debugfs_create_file_unsafe() installs no full_proxy wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not wait for an in-flight trigger_write(). The blob_lock taken there does not help, because trigger_write() never takes it. A write that races an unbind therefore writes into freed memory: trigger_write() gpio_la_poll_remove() priv = m->private buf = memdup_user() [may sleep] mutex_lock(&priv->blob_lock) debugfs_remove_recursive() [no wait] mutex_unlock(&priv->blob_lock) (remove returns; devres frees priv) priv->trig_data = buf <-- use-after-free write priv->trig_len = count The race is reachable by root via /sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind. Create "trigger" with debugfs_create_file() instead. Its full_proxy wrapper makes debugfs_remove_recursive() drain any in-flight ->write before it returns. The use-after-free is confirmed under KASAN with a minimal reproducer of the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern (available on request); it produces a slab-use-after-free write in the handler. | ||||
| CVE-2026-80566 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: hynitron_cstxxx - validate touch count and finger IDs The driver allocates max_touch_num input slots, which are indexed from zero through max_touch_num - 1. The current check allows a finger ID equal to max_touch_num to reach cst3xx_report_contact(). While the input core ignores out-of-range slot indices, reporting touch data without a valid slot change corrupts the touch state of the previously active slot. The touch count is read from the controller's report and is used to index the fixed-size report buffer without first checking its range. Reject counts larger than the supported number of touch slots before checking the trailing byte or parsing touch data. Reject finger IDs equal to or greater than max_touch_num, and return immediately when an invalid finger ID is encountered so that corrupt touch frames are discarded instead of reporting partial contact state. The V821 Avaota F1 board configures the vendor driver with one touch slot, so finger ID 1 is already invalid on that device. | ||||
| CVE-2026-80569 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer rmi_f54_work() reads a diagnostics report from the device into f54->report_data, sizing the transfer with rmi_f54_get_report_size(): report_size = rmi_f54_get_report_size(f54); ... for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { int size = min(F54_REPORT_DATA_SIZE, report_size - i); ... rmi_read_block(.., f54->report_data + i, size); } report_data is allocated once at probe from F54's own electrode counts (array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))), but rmi_f54_get_report_size() computes the size from drv_data->num_*_electrodes when those are set, i.e. from the F55 function's electrode counts. Both counts come straight from device queries (F54 and F55 each report up to 255 electrodes) and nothing constrains the F55 counts to the F54 ones. A malicious or malfunctioning RMI4 device that reports larger F55 electrode counts than its F54 counts makes report_size exceed the allocation, so the read loop writes past report_data (and the V4L2 dequeue memcpy() then reads past it). On conforming hardware the F55 configured electrodes are a subset of the F54 physical electrodes, so report_size never exceeds the buffer and well-behaved devices are unaffected. Record the allocation size and reject a report that does not fit, mirroring the existing zero-size check. | ||||
| CVE-2026-80570 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - zero report size on F54 work error In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging the 'abort' and 'error' labels into a single 'out' exit path, and ensuring that f54->report_size is always set to 0 on failure by checking for error and zeroing the local report_size first. | ||||
| CVE-2026-80574 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet Make finger2 (and also finger1) unsigned, so that if the finger index in the packet is 0 then subtracting 1 creates an array index which overflows above the existing check for FOC_MAX_FINGERS, as the existing comment says it should, instead of writing to state->fingers[-1]. | ||||
| CVE-2026-80581 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout Ignore IPC errors for pipeline state change if the firmware state is crashed or the IPC has timed out. If the firmware has crashed the kernel still needs to go through the state changes to reset its internal to be able to correctly work the next time the DSP is booted up. The case with IPC timeout is a bit more problematic, but it has been rootcaused to be the result of system scheduling blockage and the firmware did actually received and handled the message, but the reply handling got blocked by issues outside of the SOF stack. So far the best way to handle this is to continue with setting the state. | ||||
| CVE-2026-80679 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator. | ||||