Export limit exceeded: 16156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16156 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38491 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: make fallback action and fallback decision atomic Syzkaller reported the following splat: WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Modules linked in: CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline] RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00 RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45 RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001 RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000 FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0 Call Trace: <IRQ> tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432 tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975 tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166 tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925 tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363 ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:469 [inline] ip_rcv_finish net/ipv4/ip_input.c:447 [inline] NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975 __netif_receive_skb+0x1f/0x120 net/core/dev.c:6088 process_backlog+0x301/0x1360 net/core/dev.c:6440 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453 napi_poll net/core/dev.c:7517 [inline] net_rx_action+0xb44/0x1010 net/core/dev.c:7644 handle_softirqs+0x1d0/0x770 kernel/softirq.c:579 do_softirq+0x3f/0x90 kernel/softirq.c:480 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407 local_bh_enable include/linux/bottom_half.h:33 [inline] inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524 mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985 mptcp_check_listen_stop net/mptcp/mib.h:118 [inline] __mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000 mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066 inet_release+0xed/0x200 net/ipv4/af_inet.c:435 inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x402/0xb70 fs/file_table.c:465 task_work_run+0x150/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xd4 ---truncated--- | ||||
| CVE-2025-38058 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: __legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock ... or we risk stealing final mntput from sync umount - raising mnt_count after umount(2) has verified that victim is not busy, but before it has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see that it's safe to quietly undo mnt_count increment and leaves dropping the reference to caller, where it'll be a full-blown mntput(). Check under mount_lock is needed; leaving the current one done before taking that makes no sense - it's nowhere near common enough to bother with. | ||||
| CVE-2025-22077 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: Revert "smb: client: fix TCP timers deadlock after rmmod" This reverts commit e9f2517a3e18a54a3943c098d2226b245d488801. Commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock after rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is mentioned as CVE-2024-54680, but is actually did not fix anything; The issue can be reproduced on top of it. [0] Also, it reverted the change by commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") and introduced a real issue by reviving the kernel TCP socket. When a reconnect happens for a CIFS connection, the socket state transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync() in tcp_close() stops all timers for the socket. If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1 forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans. Usually, FIN can be retransmitted by the peer, but if the peer aborts the connection, the issue comes into reality. I warned about this privately by pointing out the exact report [1], but the bogus fix was finally merged. So, we should not stop the timers to finally kill the connection on our side in that case, meaning we must not use a kernel socket for TCP whose sk->sk_net_refcnt is 0. The kernel socket does not have a reference to its netns to make it possible to tear down netns without cleaning up every resource in it. For example, tunnel devices use a UDP socket internally, but we can destroy netns without removing such devices and let it complete during exit. Otherwise, netns would be leaked when the last application died. However, this is problematic for TCP sockets because TCP has timers to close the connection gracefully even after the socket is close()d. The lifetime of the socket and its netns is different from the lifetime of the underlying connection. If the socket user does not maintain the netns lifetime, the timer could be fired after the socket is close()d and its netns is freed up, resulting in use-after-free. Actually, we have seen so many similar issues and converted such sockets to have a reference to netns. That's why I converted the CIFS client socket to have a reference to netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope of CIFS and technically wrong in e9f2517a3e18, but **is in-scope and right fix**. Regarding the LOCKDEP issue, we can prevent the module unload by bumping the module refcount when switching the LOCKDDEP key in sock_lock_init_class_and_name(). [2] For a while, let's revert the bogus fix. Note that now we can use sk_net_refcnt_upgrade() for the socket conversion, but I'll do so later separately to make backport easy. | ||||
| CVE-2024-57791 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check return value of sock_recvmsg when draining clc data When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen. This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining. | ||||
| CVE-2024-53125 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: sync_linked_regs() must preserve subreg_def Range propagation must not affect subreg_def marks, otherwise the following example is rewritten by verifier incorrectly when BPF_F_TEST_RND_HI32 flag is set: 0: call bpf_ktime_get_ns call bpf_ktime_get_ns 1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff 2: w1 = w0 rewrites w1 = w0 3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r) 4: r1 >>= 32 r11 <<= 32 (r) 5: r0 = r1 r1 |= r11 (r) 6: exit; if w0 < 0xa goto pc+0 r1 >>= 32 r0 = r1 exit (or zero extension of w1 at (2) is missing for architectures that require zero extension for upper register half). The following happens w/o this patch: - r0 is marked as not a subreg at (0); - w1 is marked as subreg at (2); - w1 subreg_def is overridden at (3) by copy_register_state(); - w1 is read at (5) but mark_insn_zext() does not mark (2) for zero extension, because w1 subreg_def is not set; - because of BPF_F_TEST_RND_HI32 flag verifier inserts random value for hi32 bits of (2) (marked (r)); - this random value is read at (5). | ||||
| CVE-2023-53822 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Ignore frags from uninitialized peer in dp. When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2022-49089 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition The documentation of the function rvt_error_qp says both r_lock and s_lock need to be held when calling that function. It also asserts using lockdep that both of those locks are held. However, the commit I referenced in Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no longer covered by r_lock. This results in the lockdep assertion failing and also possibly in a race condition. | ||||
| CVE-2026-21400 | 1 Intel | 1 Ai Reference Models | 2026-10-15 | 6.7 Medium |
| Protection mechanism failure for some Intel(R) AI Reference Models before version v3.4.1 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2026-73563 | 2 Backstage, Linuxfoundation | 2 Backstage, Backstage\/plugin-auth-backend | 2026-10-15 | 4.7 Medium |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. | ||||
| CVE-2026-85970 | 1 Progress Software Corporation | 1 Marklogic Server | 2026-10-15 | 7.1 High |
| Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 enable XML external entity processing by default in multiple server paths, which could allow crafted XML to cause server-side requests or disclosure of local files. | ||||
| CVE-2026-78359 | 1 Otrs | 2 Otrs, Otrs Community Edition | 2026-10-15 | 5.4 Medium |
| OTRS does not sufficiently enforce the uniqueness of customer user identities across multiple configured CustomerUser backends. When multiple backends, such as a database and LDAP, are configured, the uniqueness check for customer user email addresses is performed only within the selected backend. As a result, an authenticated user with permission to create or modify customer users may create a customer user whose email address is already assigned to a customer user in another backend. This can result in multiple customer user records representing the same communication identity. Depending on the affected workflow and backend resolution, customer-related information or email communication may subsequently be associated with or exposed to the wrong customer user. The vulnerability does not allow unauthenticated users to create customer accounts. Exploitation requires permissions to create or modify customer users. This issue affects OTRS: * 7.0.X * 8.0.X * 2023.X * 2024.X * 2025.X * 2026.X before 2026.7.X Please note that ((OTRS)) Community Edition 6.x and before are vulnerable. Products based on the ((OTRS)) Community Edition also very likely to be affected | ||||
| CVE-2026-109733 | 1 Mozilla | 1 Firefox | 2026-10-15 | 8.1 High |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | ||||
| CVE-2026-104005 | 1 Mongodb | 1 Mongodb Server | 2026-10-15 | 6.5 Medium |
| A security issue was discovered in MongoDB mongos (the sharded cluster router) where an authenticated user with readWrite privileges could crash the mongos process by crafting a specially formed aggregation pipeline. The issue leverages an internal aggregation stage that lacks proper authorization checks despite being intended for internal use, allowing a subsequent stage to be forced to execute on the router under conditions it was not designed to handle. This results in an unhandled fatal error that causes the mongos process to immediately abort, resulting in denial of service for all clients routed through the affected mongos instance. | ||||
| CVE-2026-78357 | 1 Otrs | 1 Otrs | 2026-10-15 | 9.1 Critical |
| Previously issued authentication tokens are not immediately invalidated when an OTRS agent or customer user account is deactivated or its password is changed. As a result, an existing JWT may remain valid until its regular expiration time, which can be approximately 16 hours. An attacker who has previously obtained a valid authentication token can therefore continue to access OTRS with the privileges of the affected agent or customer user even after the corresponding account has been deactivated or the user's password has been changed. The vulnerability does not allow an attacker to obtain authentication tokens by itself. Exploitation requires possession of a previously issued and still valid token. The actual impact depends on the privileges associated with the compromised token. Customer user tokens are limited to the permissions of the affected customer account, while agent tokens may provide access to broader ticket, customer, or administrative functionality depending on the assigned permissions. This issue affects OTRS: * 7.0.X * 8.0.X * 2023.X * 2024.X * 2025.X * 2026.X before 2026.7.X | ||||
| CVE-2026-21138 | 1 Samsung | 1 Smart Switch | 2026-10-15 | N/A |
| Insufficient verification of data authenticity in Smart Switch prior to version 3.7.73 allows physical attackers to install arbitrary applications. | ||||
| CVE-2026-109449 | 1 Sensiolabs | 1 Symfony | 2026-10-15 | N/A |
| In Symfony Expression Language versions prior to 5.4.54, 6.4.48, 7.4.21, and 8.1.9, the parser of the ExpressionLanguage component built its node tree with no bound on its depth. An expression made of tens of thousands of nested unary operators, array literals, binary operators or property accesses crashed the PHP process, while the tree was being freed. #[Assert\ExpressionSyntax] passes the validated value to ExpressionLanguage::lint(), so an application validating expressions written by its users could be crashed by a single request, and so could any code parsing untrusted expressions. This issue affects symfony/expression-language through v5.4.53, v6.0.0-BETA1 through v6.4.47, v7.0.0-BETA1 through v7.4.20, and v8.0.0-BETA1 through v8.1.8. | ||||
| CVE-2026-109413 | 1 Sensiolabs | 1 Symfony | 2026-10-15 | N/A |
| In Symfony YAML prior to versions 5.4.54, 6.4.45, 7.4.18, and 8.1.6, Yaml\Parser::lexInlineStructure() recursed through lexInlineMapping() and lexInlineSequence() for every { and [ of an inline collection, without entering the nesting level that the rest of the parser bounds with maxNestingLevel. A document made of deeply nested inline collections, such as [[[[...]]]], exhausted the stack while it was being lexed: depending on the PHP version and its stack settings, the process crashed or the request ended with a fatal error. Any code parsing untrusted YAML is affected. That includes #[MapRequestPayload] when the Yaml component is installed and the endpoint does not restrict acceptFormat: a single unauthenticated request with a YAML content type is enough. This issue affects symfony/yaml through v5.4.53, v6.0.0-BETA1 through v6.4.44, v7.0.0-BETA1 through v7.4.17, and v8.0.0-BETA1 through v8.1.5. | ||||
| CVE-2026-108096 | 1 Aws | 3 Aws-amplify Data-construct, Aws-amplify Graphql-api-construct, Aws-amplify Graphql-index-transformer | 2026-10-15 | 6.5 Medium |
| Improper authorization in the query resolvers generated by @aws-amplify/graphql-index-transformer in AWS Amplify API Category before 3.1.2 might allow an authenticated remote user to read records owned by other users of the same application via crafted queries. This issue has been addressed in @aws-amplify/graphql-index-transformer 3.1.2 https://www.npmjs.com/package/@aws-amplify/graphql-index-transformer/v/3.1.2 (included in @aws-amplify/data-construct 1.17.4 https://www.npmjs.com/package/@aws-amplify/data-construct/v/1.17.4 and @aws-amplify/graphql-api-construct 1.21.4 https://www.npmjs.com/package/@aws-amplify/graphql-api-construct/v/1.21.4 ). We recommend upgrading to the latest version ensuring any forked or derivative code is patched to incorporate the new fixes and then redeploying their backend. | ||||
| CVE-2026-87108 | 1 Mongodb | 1 Ops Manager | 2026-10-15 | 3.1 Low |
| An authenticated Ops Manager user with a read-only project role can retrieve a daily host monitoring record associated with a different project when they possess the required record identifier. Insufficient ownership validation can expose deployment metadata, including host and configuration details. | ||||
| CVE-2018-19539 | 4 Debian, Jasper Project, Opensuse and 1 more | 5 Debian Linux, Jasper, Leap and 2 more | 2026-10-15 | N/A |
| An issue was discovered in JasPer 2.0.14. There is an access violation in the function jas_image_readcmpt in libjasper/base/jas_image.c, leading to a denial of service. | ||||