Export limit exceeded: 13546 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (13546 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80694 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. | ||||
| CVE-2026-80718 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() In pcpu_create_chunk(), nr_pages is the total contiguous backing allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated() uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap. Since bit N in chunk->populated means page offset N inside every unit is backed. When nr_units > 1, the function writes beyond chunk->populated. Fix it by using chunk->nr_pages. It also fixes the global pcpu_nr_empty_pop_pages accounting, since pcpu_balance_free() only iterates up to chunk->nr_pages. Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") introduced the bitmap overflow issue. Later, commit b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the accounting issue. | ||||
| CVE-2026-80720 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: add a separate bio_set for iomap_split_ioend iomap_split_ioend can split bios that already come from iomap_ioend_bioset and thus deadlock when the bioset is exhausted. Add a separate bio_set to avoid this deadlock. Christian Brauner <brauner@kernel.org> says: Mark iomap_ioend_split_bioset static as it is only used in ioend.c, fixing the sparse warning reported by the kernel test robot. | ||||
| CVE-2026-80682 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv/mm: use physical alignment for vmemmap_start_pfn RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size") attempted to account for the maximal folio alignment by feeding MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However, MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage, whereas VMEMMAP_ADDR_ALIGN is used to align a physical address. The mask-based compound_info encoding requires pfn_to_page(0) to be naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa ("mm/sparse: check memmap alignment for compound_info_has_mask()") added a check for that requirement and exposed the unit mismatch on systems such as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES * PAGE_SIZE. Here is the log: [ 0.000000][ C0] ------------[ cut here ]------------ [ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0 [ 0.000000][ C0] Modules linked in: [ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT [ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT) [ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe [ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe [ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30 [ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000 [ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0 [ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000 [ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000 [ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000 [ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000 [ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00 [ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0 [ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20 [ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000 [ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003 [ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe [ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30 [ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848 Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing round_down() logic while making the resulting vmemmap base satisfy the mask-alignment requirement. | ||||
| CVE-2026-80671 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is untrusted input, so allocation failures should be handled gracefully rather than killing the process. 4. Realloc of sched->tasks assigned directly back, leaking the old pointer on failure; nr_tasks incremented before the realloc, leaving corrupted state on failure. Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum on 64-bit), replace strcpy with strlcpy, guard against NULL comm, replace BUG_ON with NULL returns using safe realloc patterns, and add NULL checks in callers that dereference the result. | ||||
| CVE-2026-59307 | 1 Spring | 1 Spring Integration | 2026-08-29 | 8 High |
| An operator who calls JdbcMessageStore.addAllowedPatterns(...) to restrict deserialization receives no protection at all when the store is a Spring-managed bean. Spring Integration 7.1.0 Spring Integration 7.0.0 - 7.0.5 Spring Integration 6.5.0 - 6.5.10 Spring Integration 6.4.0 - 6.4.12 | ||||
| CVE-2026-81036 | 1 Stalwartlabs | 1 Stalwart | 2026-08-29 | 8.1 High |
| Stalwart Mail Server does not compare an OAuth redirect target against any registered destination in its default configuration. The validation routine in crates/http/src/auth/oauth/registration.rs returns success immediately when the client-authentication requirement is disabled, and that requirement is false in the shipped settings, so the supplied redirect value is neither matched against a registered client nor otherwise constrained. The value is stored with the authorization code, and the login page reads it back and sends the browser to it with the code attached. A request naming a destination the attacker controls therefore delivers a valid authorization code there once the account holder authenticates, and because the token endpoint checks only that the redirect presented at exchange matches the one recorded with the code, the same party can exchange it for access and refresh tokens and read the account's mail. | ||||
| CVE-2026-81031 | 1 Idurarapp | 1 Idurar | 2026-08-29 | 7.2 High |
| IDURAR ERP CRM changes the password of whichever account a request names rather than the account making the request. The update handler in backend/src/controllers/middlewaresControllers/createUserController/updatePassword.js resolves the authenticated user from the request that the token middleware populated, then issues its update against a filter built from the identifier in the URL path, and never compares the two. The route is mounted behind the administrator token check only, so any valid administrator session is sufficient, and the sole ownership-like guard in the handler rejects a single hardcoded demo address. A caller can therefore set an arbitrary password on any other administrator account and sign in as it. The read handler in the same controller directory accepts an identifier the same way, which supplies the identifiers needed to pick a target. | ||||
| CVE-2026-61792 | 2026-08-29 | 7.7 High | ||
| Weblate is a web-based continuous localization platform used to manage software translations. In versions prior to 2026.7, a project administrator can read files outside their repository through the App store metadata download feature, which resolves attacker-influenced paths without adequately confining them to the repository. This is an incomplete fix for CVE-2026-34242, whose original patch failed to fully prevent the path traversal, allowing the arbitrary file read to persist. A user with project-administrator privileges can therefore disclose the contents of files on the Weblate host that lie outside the project's repository. This issue is fixed in version 2026.7. | ||||
| CVE-2026-55867 | 1 Graylog2 | 1 Graylog2-server | 2026-08-28 | N/A |
| Graylog is a free and open log management platform. From 6.2.0 until 6.3.12, 7.0.7, and 7.1.2, the DELETE /users/{userId}/tokens/{idOrToken} endpoint implemented by UsersResource.revokeToken() in graylog2-server/src/main/java/org/graylog2/rest/resources/users/UsersResource.java checks USERS_TOKENREMOVE permission against the attacker-controlled userId path parameter before resolving the token selected by idOrToken. An authenticated user can provide an authorized userId while accessTokenService.loadById() or accessTokenService.load() resolves a token belonging to another user, including a service account or administrator, after which accessTokenService.destroy() deletes that token without checking AccessToken.getUserName(). The issue does not expose token contents, but unauthorized deletion causes integrity impact and can disrupt access-token-based integrations. This issue is fixed in versions 6.3.12, 7.0.7, and 7.1.2. | ||||
| CVE-2026-80198 | 1 Kimai | 1 Kimai | 2026-08-28 | 7.5 High |
| Kimai versions before 2.56.0 fail to restrict the config() Twig function in sandboxed invoice and export templates, allowing administrators to access arbitrary configuration keys. Attackers with admin privileges can upload malicious templates to exfiltrate server-wide secrets including LDAP bind passwords and SAML private keys into invoice or export documents accessible to lower-privileged users. | ||||
| CVE-2026-79786 | 2026-08-28 | 7.1 High | ||
| Coroot's unauthenticated MCP OAuth dynamic client registration endpoint accepts any syntactically valid redirect URI without validation, allowing attackers to register clients pointing to attacker-controlled hosts. Attackers can send authorization URLs to signed-in users, capture their authorization codes upon consent approval, and exchange them for access tokens to hijack MCP sessions. | ||||
| CVE-2026-79654 | 1 Redhat | 1 Satellite | 2026-08-28 | 4.3 Medium |
| A flaw was found in Katello where the Content View History API does not properly enforce authorization when accessing a Content View specified by the user. An authenticated user with permission to view Content Views in one organization may be able to access the lifecycle history of a Content View belonging to another organization by supplying its identifier to the affected API endpoint. This can result in unauthorized disclosure of Content View lifecycle information, including publication and promotion events, associated users, and timestamps. | ||||
| CVE-2026-55536 | 1 Mervinpraison | 1 Praisonai | 2026-08-28 | 9.1 Critical |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, Browser Server _handle_connection() checks Chrome extension origins with re.match() and the unanchored expression chrome-extension://[a-z0-9]{32}. Extra trailing characters pass before websocket.accept(), allowing start_session commands and unauthorized browser automation. This issue is fixed in version 4.6.58. | ||||
| CVE-2026-59305 | 2026-08-28 | 3.1 Low | ||
| Partition interceptor may be improperly added while sending message. Spring Cloud Stream 5.0.0 - 5.0.2 Spring Cloud Stream 4.3.0 - 4.3.3 Spring Cloud Stream 4.2.0 - 4.2.6 | ||||
| CVE-2026-82283 | 1 Voltagent | 1 Voltagent | 2026-08-28 | 8.1 High |
| VoltAgent through 2.1.20 fails to validate conversation ownership in memory API handlers, allowing authenticated users to access other users' conversations. Attackers can read, modify, and delete arbitrary conversations and messages by supplying caller-controlled identifiers to memory endpoints. | ||||
| CVE-2026-55848 | 2026-08-28 | 8.6 High | ||
| mapfish-print is a component of MapFish for printing templated cartographic maps. Prior to 3.28.30, 3.30.32, 3.31.24, 3.33.16, and 4.0.5, MapFish Print accepts an attacker-controlled GML layer url in requests to the /api/print3/print endpoint and fetches XML parsed by core/src/main/java/org/mapfish/print/map/geotools/GmlLayer.java without disabling external entities and external DTDs. A remote XML document and DTD can expand a local file entity, and the resulting content can be exposed through the GML parsing and error path. This allows unauthenticated attackers to read files such as operating-system account data, Kubernetes service-account tokens, and certificates. Replacing the file entity target with an internal HTTP endpoint also permits server-side request forgery. This issue is fixed in versions 3.28.30, 3.30.32, 3.31.24, 3.33.16, and 4.0.5. | ||||
| CVE-2026-55834 | 1 Pocket-id | 1 Pocket-id | 2026-08-28 | 4.3 Medium |
| Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to services. From 2.6.0 until 2.9.0, frontend/src/routes/authorize/+page.ts reads the redirect_uri query parameter and frontend/src/routes/authorize/+page.svelte uses the raw callbackURL in redirectWithError when prompt=none cannot complete silent authorization. The client-side path only blocks javascript and data schemes and does not invoke the backend callback allow-list validation, so an unauthenticated attacker who knows a valid client_id can redirect a victim browser to an arbitrary HTTP or HTTPS origin for phishing or OIDC error and state smuggling. This issue is fixed in version 2.9.0. | ||||
| CVE-2026-82284 | 1 Quivr | 1 Quivr | 2026-08-28 | 8.1 High |
| Quivr versions through 0.0.322 fail to validate chat ownership in the GET /chat/{chat_id}/history, DELETE /chat/{chat_id}, and POST /chat/{chat_id}/question/answer endpoints. Authenticated attackers can read other users' conversation histories including private knowledge base content, delete arbitrary chats, and inject fabricated messages into other users' conversations. | ||||
| CVE-2026-82274 | 1 Twenty | 1 Twenty | 2026-08-28 | 4.7 Medium |
| Twenty through 2.35.0 contains an open redirect vulnerability in the OAuthPropagatorController.propagateOAuthCallback endpoint that treats the state query parameter as a redirect URL. Attackers can craft malicious requests to redirect users to arbitrary hosts while forwarding OAuth authorization codes, bypassing domain validation when IS_MULTIWORKSPACE_ENABLED is disabled. | ||||