Export limit exceeded: 93900 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93900 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68241 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/mst: limit DP MST ESI service loop The loop in intel_dp_check_mst_status() keeps servicing interrupts originating from the sink without bound. Add an upper bound to the new interrupts occurring during interrupt processing to not get stuck on potentially stuck sink devices. Use arbitrary 32 tries to clear incoming interrupts in one go. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Note: The condition likely pre-dates the commit in the Fixes: tag, but this is about as far back as a backport has any chance of succeeding. Before that, the retry had a goto. (cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) | ||||
| CVE-2026-68238 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) | ||||
| CVE-2026-68203 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection. | ||||
| CVE-2026-68102 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix aperture mapping leak amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to always return false, so iounmap(aper_base_kaddr) never runs on normal driver unload, leaving an orphaned entry in the x86 PAT interval tree. On connected_to_cpu hardware, the aperture is mapped write-back (WB) via ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC) over the same range. The WC vs WB conflict causes: ioremap error for 0x..., requested 0x1, got 0x0 amdgpu: discovery failed: -2 Fix by switching to devres-managed mappings so cleanup is guaranteed regardless of drm_dev_enter() state: - connected_to_cpu path: devm_memremap(MEMREMAP_WB). For IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut, returning __va(offset) from the existing kernel direct map. No new ioremap VA or PAT entry is created, so there is nothing to orphan. - dGPU path: devm_ioremap_wc() registers iounmap() as a devres action, guaranteeing cleanup at device_del() time. Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio() since the mapping is now devres-owned. v2: Remove redundant x86_64 guard (Lijo) (cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a) | ||||
| CVE-2026-64348 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-64146 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix metabuf leak in inode xattr initialization commit bb88e8da0025 ("erofs: use meta buffers for xattr operations") converted xattr operations to use on-stack erofs_buf instances. erofs_init_inode_xattrs() uses such a metabuf while reading the inline xattr header and shared xattr id array. Some error paths after erofs_read_metabuf() leave through out_unlock without dropping the metabuf, so the folio reference can leak. Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a no-op if no folio has been acquired, and this keeps all paths after taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. | ||||
| CVE-2026-64144 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: fix urb->setup_packet leak in error paths The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths. | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-63847 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587) | ||||
| CVE-2026-63825 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | ||||
| CVE-2026-53377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: always recover the gpu Previously, in case there was no more work to do, recover worker wouldn't trigger recovery and would instead rely on the gpu going to sleep and then resuming when more work is submitted. Recover_worker will first increment the fence of the hung ring so, if there's only one job submitted to a ring and that causes an hang, it will early out. There's no guarantee that the gpu will suspend and resume before more work is submitted and if the gpu is in a hung state it will stay in that state and probably trigger a timeout again. Just stop checking and always recover the gpu. Patchwork: https://patchwork.freedesktop.org/patch/704066/ | ||||
| CVE-2026-53345 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. | ||||
| CVE-2026-53267 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c | ||||
| CVE-2026-53230 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max. | ||||
| CVE-2026-53229 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | ||||
| CVE-2026-53102 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-53000 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook. | ||||
| CVE-2026-52961 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size The generic/642 test-case can reproduce the kernel crash: [40243.605254] ------------[ cut here ]------------ [40243.605956] kernel BUG at fs/ceph/xattr.c:918! [40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI [40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full) [40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [40243.611820] Workqueue: ceph-msgr ceph_con_workfn [40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0 [40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc [40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287 [40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000 [40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000 [40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000 [40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000 [40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd [40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000 [40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0 [40243.627408] Call Trace: [40243.627839] <TASK> [40243.628188] __prep_cap+0x3fd/0x4a0 [40243.628789] ? do_raw_spin_unlock+0x4e/0xe0 [40243.629474] ceph_check_caps+0x46a/0xc80 [40243.630094] ? __lock_acquire+0x4a2/0x2650 [40243.630773] ? find_held_lock+0x31/0x90 [40243.631347] ? handle_cap_grant+0x79f/0x1060 [40243.632068] ? lock_release+0xd9/0x300 [40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340 [40243.633429] ? lock_release+0xd9/0x300 [40243.634052] handle_cap_grant+0xcf6/0x1060 [40243.634745] ceph_handle_caps+0x122b/0x2110 [40243.635415] mds_dispatch+0x5bd/0x2160 [40243.636034] ? ceph_con_process_message+0x65/0x190 [40243.636828] ? lock_release+0xd9/0x300 [40243.637431] ceph_con_process_message+0x7a/0x190 [40243.638184] ? kfree+0x311/0x4f0 [40243.638749] ? kfree+0x311/0x4f0 [40243.639268] process_message+0x16/0x1a0 [40243.639915] ? sg_free_table+0x39/0x90 [40243.640572] ceph_con_v2_try_read+0xf58/0x2120 [40243.641255] ? lock_acquire+0xc8/0x300 [40243.641863] ceph_con_workfn+0x151/0x820 [40243.642493] process_one_work+0x22f/0x630 [40243.643093] ? process_one_work+0x254/0x630 [40243.643770] worker_thread+0x1e2/0x400 [40243.644332] ? __pfx_worker_thread+0x10/0x10 [40243.645020] kthread+0x109/0x140 [40243.645560] ? __pfx_kthread+0x10/0x10 [40243.646125] ret_from_fork+0x3f8/0x480 [40243.646752] ? __pfx_kthread+0x10/0x10 [40243.647316] ? __pfx_kthread+0x10/0x10 [40243.647919] ret_from_fork_asm+0x1a/0x30 [40243.648556] </TASK> [40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore [40243.654766] ---[ end trace 0000000000000000 ]--- Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") moved the required_blob_size computation to before the __build_xattrs() call, introducing a race. __build_xattrs() releases and reacquires i_ceph_lock during execution. In that window, handle_cap_grant() may update i_xattrs.blob with a newer MDS-provided blob and bump i_xattrs.version. When __bui ---truncated--- | ||||
| CVE-2026-46012 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer. | ||||
| CVE-2026-45961 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275 | ||||