Export limit exceeded: 385330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 95844 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (95844 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80672 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix u16 truncation of restart-area length check ntfs_check_restart_area() validates that the $LogFile restart area and its trailing log client record array fit within the system page size: u16 ra_ofs, ra_len, ca_ofs; ... ra_len = ca_ofs + le16_to_cpu(ra->log_clients) * sizeof(struct log_client_record); if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...) return false; ra_len is u16, but the right-hand side is computed in size_t (sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients come straight from the on-disk restart area. With an on-disk log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64 gives ra_len 128), so the "fits in the page" check passes even though the client array described by log_clients extends far beyond the page. ntfs_check_log_client_array() then walks the array bounded only by the on-disk log_clients count: cr = ca + idx; if (cr->prev_client != LOGFILE_NO_CLIENT) ... For log_clients 410 it dereferences records up to ca + 409 * 160, ~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an out-of-bounds read of attacker-controlled extent, reachable when a crafted NTFS image is mounted (load_and_check_logfile() at mount time). This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g userspace driver but never in this revived classic driver. Compute the restart-area length in a u32 so the existing bounds check rejects an over-large client array instead of being defeated by the truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded from __le16 on-disk fields and every comparison already promotes to int/size_t, so this changes no result and keeps the declaration uniform. | ||||
| CVE-2026-80717 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise. | ||||
| CVE-2026-80723 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior. | ||||
| CVE-2026-80635 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from short trigger BA firmware response The firmware response length is only checked against sizeof(*rsp) (20 bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read at buf + 20 without verifying the response contains it. This causes an out-of-bounds read of stale heap data, corrupting the BA session state. Add validation that the response includes the candidate data. | ||||
| CVE-2026-80638 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent [BUG] Unlinking a refcounted file whose refcount tree has leaf blocks triggers a fortify panic due to an out-of-bounds write. [CAUSE] When the last leaf block is removed from a refcount tree, ocfs2_remove_refcount_extent() converts the root back to leaf mode with a bulk memset on &rb->rf_records. rf_records sits in an anonymous union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count, and is 0 for a single-level tree. With rl_count equal to 0, the memset writes past the 16-byte declared size of rf_records, which the fortify checker catches. [FIX] Replace the bulk memset on &rb->rf_records with a correctly-bounded memset on rl_recs[] alone, after setting rl_count to the correct value. | ||||
| CVE-2026-80645 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop. | ||||
| CVE-2026-80649 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does. | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80691 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE In the iblock_execute_pr_out() function, PRO_PREEMPT, PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability checks through ops->pr_clear. The error check allows unimplemented hooks to pass through the gate, resulting dereferencing a NULL function pointer. Check whether the hooks that need to be called are supported. | ||||
| CVE-2026-80678 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on the error path, but that could race with the ISR under the lock and still cause a NULL pointer dereference. Fix both issues by deferring the assignment of i2c_imx->slave and i2c_imx->last_slave_event to after a successful resume, and by performing the assignment inside the slave_lock critical section. This guarantees that the slave pointer is never left stale on the error path and is always valid when observed by the interrupt handler. | ||||
| CVE-2026-80721 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. | ||||
| CVE-2026-80615 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the structure to the options_len, which is then initialized to zero. Later, we're initializing the structure by copying the tunnel info together with the options, and this triggers a warning for a potential memcpy overflow, since the compiler estimates that the options can't fit into the structure, even though the memory for them is actually allocated. memcpy: detected buffer overflow: 104 byte write of buffer size 96 WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report skb_tunnel_info_unclone+0x179/0x190 geneve_xmit+0x7fe/0xe00 The issue is triggered when built with clang and source fortification. Fix that by doing the copy in two stages: first - the main data with the options_len, then the options. This way the correct length should be known at the time of the copy. It would be better if the options_len never changed after allocation, but the allocation code is a little separate from the initialization and it would be awkward and potentially dangerous to return a struct with options_len set to a non-zero value from the metadata_dst_alloc(). Another option would be to use ip_tunnel_info_opts_set(), but it is doing too many unnecessary operations for the use case here. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||
| CVE-2026-80713 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: preserve task restrictions across exec Per-task restrictions apply to all rings created by a task. Once installed, they should not be dropped across exec. For a task that has used io_uring, the exec cancellation path calls __io_uring_free(). This frees both the task context and the per-task restriction, so a ring created after exec is unrestricted. Split task context cleanup into io_uring_free_tctx(), and use it from the exec cancellation path. Keep __io_uring_free() for final task cleanup, where both the context and restriction are released. | ||||
| CVE-2026-80716 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained. | ||||
| CVE-2026-80720 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: add a separate bio_set for iomap_split_ioend iomap_split_ioend can split bios that already come from iomap_ioend_bioset and thus deadlock when the bioset is exhausted. Add a separate bio_set to avoid this deadlock. Christian Brauner <brauner@kernel.org> says: Mark iomap_ioend_split_bioset static as it is only used in ioend.c, fixing the sparse warning reported by the kernel test robot. | ||||
| CVE-2026-80664 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"), so this patch is no longer critical. Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra family check is a good idea in any case. ] | ||||
| CVE-2026-80596 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - only expose sysfs attributes on control interface When the driver was converted to use the driver core to instantiate device attributes (via .dev_groups in the usb_driver structure), the attributes started appearing on all interfaces bound to the driver. Since the ims-pcu driver manually claims the secondary data interface during probe, the driver core automatically creates the sysfs attributes for that interface as well. However, the driver only supports these attributes on the primary control interface. Data interfaces lack the necessary descriptors and internal state to handle these requests, and accessing them can lead to unexpected behavior or crashes. Fix this by updating the is_visible() callbacks for both the main and OFN attribute groups to verify that the interface being accessed is indeed the control interface. | ||||
| CVE-2026-80601 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||