Export limit exceeded: 386818 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386818 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80795 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target(). | ||||
| CVE-2026-14978 | 1 Hashicorp | 2 Go-slug, Go Slug | 2026-09-04 | 5.5 Medium |
| HashiCorp go-slug 0.4.0 through 0.18.2 could allow a local attacker to bypass .terraformignore exclusions and cause sensitive files to be included in Terraform slug uploads due to improper handling of Unicode normalization during path matching. | ||||
| CVE-2026-80885 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix uncancelled rxrpc OOB message handler Fix AFS to cancel its OOB message processing (typically to respond to security challenges). Also move OOB message processing to afs_wq so that it's also waited for and make the OOB handler just return if the net namespace is no longer live. | ||||
| CVE-2026-80876 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix event length with forced 8-byte alignment When RB_FORCE_8BYTE_ALIGNMENT is true, rb_calculate_event_length() reserves the space of event->array[0] for placing the data length and rb_update_event() stores the data length in event->array[0] accordingly. As a result the whole event length will add extra 4 bytes for sizeof(event.array[0]) unconditionally. But ring_buffer_event_length() only subtracts the sizeof(event->array[0]) for events larger than RB_MAX_SMALL_DATA + sizeof(event->array[0]). As a result, small events on architectures with RB_FORCE_8BYTE_ALIGNMENT=true report a data length that is 4 bytes larger than expected. To fix it, add the RB_FORCE_8BYTE_ALIGNMENT as a condition to subtract the size of that length field whenever RB_FORCE_8BYTE_ALIGNMENT is true. This issue is observed in a riscv64 kernel with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, when we run ftrace selftest trace_marker_raw.tc, we get the weird log: for cases where the id is 1..100, the number of data field is 8*N, but once id exceeds 100, the number of data field becomes 8*N+4: # 1 buf: 58 00 00 00 80 5e d1 63 (number of data field is 8*1) ... # a buf: 58 ... (number of data field is 8*2) ... # 64 buf: 58 ... (number of data field is 8*13) # 65 buf: 58 ... (number of data field is 8*13+4) After applying this change, the number of data field keeps being 8*N+4 consistently. | ||||
| CVE-2026-80865 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add missing access_ok call to copy_user_syms As reported by sashiko we use __get_user without prior access_ok call on the user space pointer. Adding the missing call for the whole pointer array. Plus removing the err check in the error path, because it's not needed and also we can return -ENOMEM directly from the first kvmalloc_array fail path. [1] https://lore.kernel.org/bpf/20260611115503.AC16D1F00893@smtp.kernel.org/ | ||||
| CVE-2026-13297 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-09-04 | N/A |
| IBM Verify Identity Access Advanced Access Control may be vulnerable to an information disclosure attack. | ||||
| CVE-2026-80760 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255 mgmt_hci_cmd_sync() checks that the message length agrees with params_len but puts no upper bound on it. params_len is __le16 while the parameter length in the HCI command header is a u8: struct hci_command_hdr { __le16 opcode; __u8 plen; } __packed; hci_cmd_sync_alloc() assigns one to the other: hdr->plen = plen; if (plen) skb_put_data(skb, param, plen); so a params_len of 256 leaves plen at 0 while all 256 bytes are still appended. The frame handed to the driver then declares no parameters and carries 256 of them. On a length framed transport such as H:4 the controller takes the trailing bytes as the start of the next packet. The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about 1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands") only made params_len agree with the message length, a value that fits the message but not the header field is still accepted. Reject params_len that does not fit the header field. | ||||
| CVE-2026-80761 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here. | ||||
| CVE-2026-80762 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix accept list UAF during suspend hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait. | ||||
| CVE-2026-80763 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: validate LE Set CIG Parameters response The Command Complete dispatch validates only the fixed part of the LE Set CIG Parameters response. After that part is pulled from the skb, hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the trailing handle array. Matching num_handles against the command's num_cis does not guarantee that the response contains the advertised handles. A truncated response from a malfunctioning controller can therefore make the handler read beyond the skb data. Validate that the remaining skb data contains all advertised handles. Include this in the existing response validation so malformed responses also follow the established CIG failure handling. | ||||
| CVE-2026-80823 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length is at least sizeof(struct st21nfca_atr_req), but never checks that atr_req->length does not exceed the actual received length (skb->len). st21nfca_tm_send_atr_res() then trusts the declared length: gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); ... memcpy(atr_res->gbi, atr_req->gbi, gb_len); so an RF peer that sends a short frame but sets atr_req->length larger than the frame makes gb_len exceed the general bytes actually present, and the memcpy reads out of bounds past the received skb. Those bytes are placed in the ATR_RES and sent back to the peer (kernel-memory disclosure to a proximity attacker); a larger declared length is an out-of-bounds read (DoS). Reject frames whose declared length exceeds the received length. The adjacent nfc_tm_activated() path in the same function already derives its general-bytes length from skb->len rather than the declared field. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||
| CVE-2026-78604 | 1 Elastic | 1 Elastic Agent | 2026-09-04 | 7.8 High |
| Incorrect Permission Assignment for Critical Resource (CWE-732) in Elastic Agent can lead to local privilege escalation via Replace Binaries (CAPEC-642). On Windows systems where Elastic Agent is installed in unprivileged mode, resources used by the agent service are created with access controls broader than required. A local user could take advantage of this to cause the service to execute code of their choosing, ultimately obtaining SYSTEM-level privileges on the host. | ||||
| CVE-2026-14470 | 1 Ibm | 1 Langflow Oss | 2026-09-04 | 6.5 Medium |
| IBM Langflow OSS 1.0.0 through 1.10.2 could allow an authenticated attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. | ||||
| CVE-2026-85008 | 2026-09-04 | 3.7 Low | ||
| undici's cache interceptor documents that only safe HTTP methods are cached, but its logic to skip caching is built by subtracting the configured methods from the set of safe methods, so an unsafe method such as POST, PUT, or DELETE is never placed in the skip list and instead falls through to the full cache-read path. The response-storage gate also lacked a method check, so a response to an unsafe request that is heuristically cacheable or carries an explicit Cache-Control directive is stored and later replayed from cache. Because response headers from a remote origin are untrusted, an origin can answer once with a cacheable status and then have the client's own subsequent state-changing requests to that path served from the stale cache entry without ever reaching the origin, an integrity failure that occurs under the interceptor's default configuration. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. | ||||
| CVE-2026-16660 | 1 Ibm | 1 Db2 Mirror For I | 2026-09-04 | 5.3 Medium |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. | ||||
| CVE-2026-16689 | 1 Ibm | 2 App Connect Enterprise, Integration Bus For Zos | 2026-09-04 | 6.2 Medium |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.1, and 12.0.1.0 through 12.0.12.28 and IBM Integration Bus for z/OS 10.1.0.0 through 10.1.0.7 could allow a local attacker to obtain sensitive information due to improper logging of credentials. | ||||
| CVE-2026-16826 | 1 Ibm | 1 I | 2026-09-04 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-16941 | 1 Ibm | 1 I | 2026-09-04 | 4.3 Medium |
| IBM i 7.6, 7.5, and 7.4 could allow a remote authenticated attacker to modify certain system messages due to improper authorization. | ||||
| CVE-2026-17057 | 1 Ibm | 1 I | 2026-09-04 | 6.5 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and affect data integrity due to missing authentication for critical functions. | ||||
| CVE-2026-78609 | 1 Elastic | 2 Eck Operator, Elastic Cloud On Kubernetes | 2026-09-04 | 5.4 Medium |
| Incorrect Authorization (CWE-863) in Elastic Cloud on Kubernetes (ECK) can lead to unauthorized modification of data via Metadata Spoofing (CAPEC-690). An actor holding limited Kubernetes permissions confined to a single namespace could cause attacker-controlled certificate material to be included in the Elasticsearch client trust bundle managed by ECK in a separate namespace. | ||||