Export limit exceeded: 98007 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (98007 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74306 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/qat: fix f_pos race in qat_vf_resume_write() qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but copies into the migration-state buffer after taking the lock and re-reading the shared file position. Two concurrent writers could therefore pass the bounds check with the old offset, then have the second writer copy after the first advanced f_pos, writing past the end of the migration-state buffer. Take migf->lock before doing the boundary checks. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74292 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tegra: tegra210_ahub: Validate written enum value tegra_ahub_put_value_enum() reads e->values[item[0]] before checking whether item[0] is within the enum item range. The existing check therefore happens too late to prevent an out-of-range read of the values array. Move the check before the array access. | ||||
| CVE-2026-74312 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: validate virtqueue index in mmap and fault paths vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a virtqueue index for get_vq_notification(), but they do not validate that the index is smaller than v->nvqs. The ioctl path already performs both a bounds check and array_index_nospec(), but the mmap/fault path only checks that the index fits in u16. This allows an out-of-range queue index to reach driver-specific get_vq_notification() callbacks. Fix this by extracting a unified vhost_vdpa_get_vq_notification() helper that validates the queue index against v->nvqs and applies array_index_nospec() before calling the driver callback. Both the mmap and fault paths use this helper, and the bounds checking is consolidated into a single location. From source inspection, the most defensible impact is out-of-bounds access in the callback path, potentially leading to invalid PFN remaps and crash/DoS. | ||||
| CVE-2026-74313 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vduse: hold vduse_lock across IDR lookup in open path vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path. | ||||
| CVE-2026-74314 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields on map value recycle Map update and delete paths currently call bpf_obj_free_fields() when a value is being replaced or recycled. That makes field destruction depend on the context of the update/delete operation. For tracing programs this can include NMI context, where referenced kptr destructors, uptr unpinning, and graph root destruction are not generally safe. Introduce bpf_obj_cancel_fields() for the reusable-value path. It only performs NMI-safe cleanup for timer, workqueue, and task_work fields. Fields that need full destruction are left attached to the recycled value and are destroyed by the final cleanup path instead. Switch array and hashtab update/delete/recycle paths to this cancel helper. Keep bpf_obj_free_fields() for final map destruction and for bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator destructors, so teardown continues to walk the normal and extra elements and fully destroy their fields. This deliberately relaxes the eager-free semantics of map update/delete for special fields. Programs that relied on a recycled map slot becoming empty immediately after update/delete were relying on behavior that cannot be implemented safely from every BPF execution context without offloading arbitrary destructors. There is a chance this change breaks programs making assumptions regarding the eager freeing of fields. If so, we can relax semantics to cancellation only when irqs_disabled() is true in the future. However, theoretically, map values that get reused eagerly already have weaker guarantees as parallel users can recreate freed fields before the new element becomes visible again. | ||||
| CVE-2026-74316 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Handle layout stid in nfsd4_drop_revoked_stid() nfsd4_drop_revoked_stid() has no SC_TYPE_LAYOUT case, so when a client sends FREE_STATEID for an admin-revoked layout stid, the default branch releases cl_lock and returns without unhashing or releasing the stid. The stid remains in the IDR and on the per-client list until the client is destroyed. Remove the layout stid from the per-client list and call nfs4_put_stid() to drop the creation reference. When the refcount reaches zero, nfsd4_free_layout_stateid() handles the remaining cleanup: cancelling the fence worker, removing from the per-file list, and freeing the slab object. | ||||
| CVE-2026-74328 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Destroy the pages content after detaching from dmabuf Sashiko points out this has gotten out of order, the mutex could still be in use through the dmabuf invalidation callbacks. Don't destroy any of the pages content until the dmabuf is fully detached. | ||||
| CVE-2026-67846 | 2026-08-22 | 7.8 High | ||
| Berkeley Out-of-Order Machine (BOOM) commit 5223e44cfeb26f41380057a2eb4d651197475f69 contains a potential incorrect privilege assignment issue in the v3 and v4 NBDTLB implementations. The raw mstatus.SUM value participates in the read and write permission logic without an explicit local satp.MODE validity check at the use site | ||||
| CVE-2026-74349 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74356 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix vhost_get_avail_idx for a non empty ring vhost_get_avail_idx is supposed to report whether it has updated vq->avail_idx. Instead, it returns whether all entries have been consumed, which is usually the same. But not always - in drivers/vhost/net.c and when mergeable buffers have been enabled, the driver checks whether the combined entries are big enough to store an incoming packet. If not, the driver re-enables notifications with available entries still in the ring. The incorrect return value from vhost_get_avail_idx propagates through vhost_enable_notify and causes the host to livelock if the guest is not making progress, as vhost will immediately disable notifications and retry using the available entries. This goes back to commit d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()") which changed vhost_enable_notify() to compare the freshly read avail index against vq->last_avail_idx instead of the previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move smp_rmb() into vhost_get_avail_idx()") then carried over the same comparison when refactoring vhost_enable_notify() to call the unified vhost_get_avail_idx(). The obvious fix is to make vhost_get_avail_idx do what the comment says it does and report whether new entries have been added. | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74365 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh. | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74378 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | ||||
| CVE-2026-74380 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix iommu_map_sgtable() return value check Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. pin_job() also was incorrectly assigning to 'int', which could cause overflows into negative values. Update pin_job() to correctly check for errors from iommu_map_sgtable. | ||||
| CVE-2026-74383 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix out-of-bounds access in nvme_setup_descriptor_pools nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the numa_node forwarded from hctx->numa_node by its single caller, nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the value becomes UINT_MAX and the index walks off the array (sized to nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace without a /dev node. Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel: BUG: unable to handle page fault for address: ffff889101603d38 RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme] Call Trace: nvme_init_hctx+0x10/0x20 [nvme] nvme_alloc_ns+0x9e/0xa10 [nvme_core] nvme_scan_ns+0x301/0x3b0 [nvme_core] nvme_scan_ns_async+0x23/0x30 [nvme_core] Switch the parameter to int and fall back to node 0 when it is NUMA_NO_NODE; node 0 is always present. | ||||