Export limit exceeded: 417742 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 93894 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93894 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90206 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. | ||||
| CVE-2026-90183 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: clear delay state when freeing policy data io.latency can throttle a group which has no latency target of its own. When a sibling misses its target, check_scale_change() scales down its peers, and a peer that reaches queue depth one gets blkcg_use_delay() called on it on every further scale-down, even with min_lat_nsec == 0. iolatency_pd_offline() resets the target through iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero to zero transition, so it never clears such a peer. Freeing the policy data then leaves blkg->use_delay set and blkcg->congestion_count elevated with nothing left that can drop it. blk_cgroup_congested() then returns true for every task in that cgroup and its descendants for as long as the cgroup lives: page_cache_sync_ra() cuts readahead to a single page, page_cache_async_ra() skips it altogether, and __folio_throttle_swaprate() takes swap_avail_lock and schedules a throttle on anonymous folio allocation. Clear the delay in iolatency_pd_free(). By then bio-held blkg references have drained, or the queue is frozen for policy deactivation, so check_scale_change() cannot re-arm it. The free callback can also see policy data which was never attached to a blkg, hence the pd->blkg check. | ||||
| CVE-2026-90125 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv(). | ||||
| CVE-2026-90104 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | ||||
| CVE-2026-90087 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: do not leak an hci_conn when a second LE connect is rejected create_le_conn_complete() decides whether the failed connection is still pending by comparing it against hci_lookup_le_connect(), which returns the first LE connection in BT_CONNECT. That is the same connection only while at most one is pending. Two can be pending. Connections created on the passive scan path sit in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to hci_lookup_le_connect() until hci_le_create_conn_sync() clears the flag when their command is issued, so the -EBUSY guard in hci_connect_le() does not prevent a second connection from being queued while the first is still on the scan path. Whenever two connections are in BT_CONNECT at once, the lookup may return one connection while create_le_conn_complete() is reporting the failure of the other; the early exit then drops the error and hci_conn_failed() never runs on the connection that failed. The controller also rejects a second HCI_OP_LE_CREATE_CONN issued while another connection creation is still outstanding, per Core Spec Vol 4, Part E. The spec calls for Command Disallowed there; the bcm43438 observed here answers with an LMP/LL error code instead, which bt_to_errno() maps to the -EPROTO (-71) in the log below. The leaked connection stays in BT_CONNECT forever, and because hci_connect_le() refuses to dial while hci_lookup_le_connect() finds anything, every subsequent attempt to reach any peer fails with -EBUSY and no command reaches the controller at all. Seen on a bcm43438 with two BLE peers polled on the same interval (state 5 is BT_CONNECT; both handles are UNSET ones, allocated from the ida above HCI_CONN_HANDLE_MAX): Bluetooth: hci1: Opcode 0x2013 failed: -71 # hcitool con < LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL < LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL A btmon capture across the next ten minutes of connect attempts contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections do not recover until the adapter is reset. With this change the same scenario fails the rejected connection cleanly and further connects to both peers go through. Ask about the connection itself instead of about the device. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89795 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Allow per function PCI slots to fix slot reset on s390 On s390 systems, which use a machine level hypervisor, PCI devices are always accessed through a form of PCI pass-through which fundamentally operates on a per PCI function granularity. This is also reflected in the s390 PCI hotplug driver which creates hotplug slots for individual PCI functions. Its reset_slot() function, which is a wrapper for zpci_hot_reset_device(), thus also resets individual functions. Currently, the pci_create_slot() assigns the same pci_slot object to multifunction devices. This approach worked fine on s390 systems that only exposed virtual functions as individual PCI domains to the operating system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions") s390 supports exposing the topology of multifunction PCI devices by grouping them in a shared PCI domain. This creates a problem when resetting a function through the hotplug driver's slot_reset() interface. When attempting to reset a function through the hotplug driver, the shared slot assignment causes the wrong function to be reset instead of the intended one. It also leaks memory as we do create a pci_slot object for the function, but don't correctly free it in pci_slot_release(). Add a flag for struct pci_slot to allow per function PCI slots for functions managed through a hypervisor, which exposes individual PCI functions while retaining the topology. Since we can use all 8 bits for slot 'number' (for ARI devices), change slot 'number' u16 to account for special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. | ||||
| CVE-2026-89761 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix out-of-bounds write when null terminating a label vec aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). | ||||
| CVE-2026-89702 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: size fh_verify server sockaddr slot by xpt_locallen The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the server sockaddr slot sized by xpt_remotelen but fill it from xpt_local using xpt_locallen: TP_STRUCT__entry( ... __sockaddr(server, rqstp->rq_xprt->xpt_remotelen) ... ) TP_fast_assign( ... __assign_sockaddr(server, &rqstp->rq_xprt->xpt_local, rqstp->rq_xprt->xpt_locallen); ... ) When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy writes past the reserved ring-buffer slot. In the reverse direction (xpt_locallen < xpt_remotelen) the slot is oversized and the unwritten tail leaks prior ring-buffer contents to trace consumers. The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote() is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from the RDMA connect path; svc_create_socket() for UDP calls only svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request then copies 16 or 28 bytes from xpt_local into a zero-byte slot. The other NFSD tracepoints that record the server address (NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS, SVC_RQST_ENDPOINT_FIELDS) already size the server slot by xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only exceptions. Fix by sizing the server slot with xpt_locallen so the declared slot matches the copy length. The client slot and its assignment already agree on xpt_remotelen and are left untouched. | ||||
| CVE-2026-89644 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map leak in NOCOW direct I/O write btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an extent map reference that must be dropped on all exit paths. For direct writes into a NOCOW range, btrfs_get_blocks_direct_write() keeps using that extent map and asks btrfs_create_dio_extent() to allocate the ordered extent. If that fails, for example because btrfs_alloc_ordered_extent() fails, the function returns the error without dropping the input extent map. The PREALLOC path avoided this by dropping the input extent map before replacing it with the newly created one. Check the error from btrfs_create_dio_extent() before replacing the map and drop the input extent map on failure. | ||||
| CVE-2026-89640 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). | ||||
| CVE-2026-89580 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and copying it into the caller's buffer, so the entry cannot be reused underneath us and trace->nr stays bounded by max_depth. Build ID resolution may fault and is therefore deferred until after preemption is re-enabled; by then the instruction pointers have already been copied into buf, so it operates only on that private copy. Note, preempt_disable() also subsumes the buffer-lifetime guarantee the rcu_read_lock() provided, since a preempt-disabled section is an RCU read-side critical section for the callchain buffers' call_rcu() reclaim. [ changed Fixes: commit ] | ||||
| CVE-2026-89539 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: reject duplicate CREDS_VALUE options gssx_dec_option_array() walks the wire-supplied option array and, for every entry whose name matches CREDS_VALUE, calls gssx_dec_linux_creds() on the same struct svc_cred. That helper unconditionally installs a fresh groups_alloc() result into creds->cr_group_info without releasing whatever pointer was already there: for (i = 0; i < count; i++) { ... decode name ... if (length == sizeof(CREDS_VALUE) && memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) { err = gssx_dec_linux_creds(xdr, creds); ... } } A reply that carries two CREDS_VALUE entries therefore overwrites cr_group_info on the second iteration and orphans the group_info allocated by the first call. The earlier free_creds path only releases the last cr_group_info via free_svc_cred(), so the first allocation's refcount stays at one and its kvmalloc-backed storage is leaked. No in-tree caller of gssp_accept_sec_context_upcall() expects more than one CREDS_VALUE per reply. Fix by tracking whether a CREDS_VALUE option has already been decoded and returning -EINVAL on any subsequent match, so the free_creds path releases the single group_info that was installed. | ||||
| CVE-2026-89531 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject connection when transport allocation fails handle_connect_req() returns without action when svc_rdma_create_xprt() fails to allocate the new transport. The CM core returns 0 for CONNECT_REQUEST events, so it does not destroy the new rdma_cm_id. Each allocation failure under memory pressure leaks one rdma_cm_id, and a remote peer driving connection attempts can amplify this. Reject the connection by returning a non-zero status from the CM event handler, which tells the CM core to destroy the orphaned cm_id. | ||||
| CVE-2026-89530 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject inline replies that overflow the pull-up buffer An RPC-over-RDMA client can request a reply, such as an NFS READ payload, without providing a Write list or a Reply chunk to carry it. When such a reply needs more scatter/gather entries than the device's Send Queue supports, svc_rdma_pull_up_needed() selects pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size bytes, while the reply on this path is bounded only by the client's request, so svc_rdma_xb_linearize() copies past the end of the buffer and corrupts adjacent slab memory. The oversized length is then stored in sc_sges[0].length and posted, so the device also reads beyond the mapped region. The SGE-exhaustion branch is the only pull-up path that can exceed the buffer: the threshold branch pulls up only replies smaller than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE budget are sent directly without linearization. Make svc_rdma_pull_up_needed() report -E2BIG when the reply it would pull up cannot fit sc_max_req_size, and fail the request with ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping the connection. The helper no longer answers a simple yes/no question: it now reports pull-up, no pull-up, or -E2BIG for a reply too large to linearize. Rename svc_rdma_pull_up_needed() to svc_rdma_check_pull_up() so its name no longer implies a boolean predicate. | ||||
| CVE-2026-89527 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Use svc_xprt_put to free listener on create failure svc_rdma_create() calls kfree(cma_xprt) when svc_rdma_create_listen_id() fails. svc_xprt_init() has already acquired a net namespace reference via get_net_track(); kfree bypasses svc_xprt_free() which releases it. Replace the kfree() with svc_xprt_put() so the kref_init birth reference drops to zero and svc_xprt_free() dispatches svc_rdma_free() to clean up properly. sc_cm_id is still NULL at that point; the preceding patch added the necessary NULL guard in svc_rdma_free(). svc_xprt_free() also drops the module reference via module_put(), but the caller _svc_xprt_create() does the same on xpo_create failure, double-putting the single try_module_get() it acquired. Take a compensating __module_get() before the svc_xprt_put() to keep the count balanced, matching the convention in svc_rdma_accept()'s error path. | ||||
| CVE-2026-89437 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: int1092: Fix potential memory leak in sar_probe() The memory allocated for device_mode_info in parse_package() called by sar_get_data() is not freed in some of the error paths in sar_probe(). Fix that by converting to use device managed allocations. | ||||
| CVE-2026-80996 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modify, session create, and session modify netlink handlers send multicast notifications through helpers that can fail while allocating or encoding a message, or while multicasting it. For tunnel and session create/modify, a notification is sent after the live operation has completed. Returning a best-effort notification error as the command result can therefore report failure for an operation that already committed and can cause callers to retry and accumulate live objects. Keep sending notifications for listener visibility, but do not propagate their best-effort status as the command result. This also keeps the tunnel modify command consistent with the other notification-only paths. | ||||
| CVE-2026-80990 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Release the Rx HopID that was handed out on mismatch tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range() as the lower bound, so a taken id is not an error there: the allocator returns the next free one above it. tbnet_connected_work() asks for the peer's transmit path, treats any other id as a failure and returns without releasing what it got, so that allocation stays live for the rest of the XDomain connection with nothing left holding a reference to it. Release the id when it is not the one we asked for, the same way the error unwind at the end of the function releases the expected one. | ||||