Export limit exceeded: 46032 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46032 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72336 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72329 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | ||||
| CVE-2026-72203 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | ||||
| CVE-2026-72198 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a->non_resident. ntfs_inode_sync_standard_information() does the same when updating the standard information value. ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and index.c depend on the same lookup contract before consuming the resident index root value. Reject non-resident records for all resident-only attribute types in the shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior, but factor it through a helper and extend it to $STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and $EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract hardening for resident-only formats; this patch only rejects the non-resident form and does not add new resident value validation for those types. | ||||
| CVE-2026-72168 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info. | ||||
| CVE-2026-72028 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable] | ||||
| CVE-2026-72007 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge and AXI clock may have a timing issue. Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is de-asserted by HW) Add a bool variable is_errata_err050531 in 'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround is needed. If is_errata_err050531 is true, first clear the clk before powering up gpc, then enable the clk after powering up gpc. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A | ||||
| CVE-2026-68449 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning The hand-rolled bit-scanning loop in the NCQ completion path has an infinite loop bug. When tag_mask has only high bits set (e.g. 0x80000000), the inner while loop left-shifts tag_mask until it overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1 stays 0, causing an infinite loop in hardirq context with a spinlock held. Replace the open-coded bit-scanning with __ffs() which correctly finds the least significant set bit and is bounded by the width of the argument. | ||||
| CVE-2026-68435 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix address space mismatch in kexec command line lookup When searching the loaded segments for the "kexec" command line marker, the kexec_load(2) path (file_mode == 0) passes the user-space segment buffer straight to strncmp() through a bogus (char __user *) cast. This dereferences a user pointer in kernel context, which is wrong and is flagged by sparse: arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in argument 2 (different address spaces) @@ expected char const * @@ got char [noderef] __user * Here copy the marker-sized prefix of each segment into a small on-stack buffer with copy_from_user() before comparing, and skip segments that fault. The subsequent copy_from_user() that stages the full command line into the safe area is left unchanged. | ||||
| CVE-2026-68426 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the crypto engine and may be freed. validate_xmit_skb_list() later does tail->next = skb, writing through that stale pointer -- a use-after-free. Repoint skb->prev at the last retained segment before returning. | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68408 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket that owns a PMSR session is closed, cfg80211_release_pmsr() clears the request's nl_portid and queues pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously. If the interface tears down concurrently, cfg80211_pmsr_wdev_down() is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk) to wait for any running work. The work function acquires wiphy_lock via guard(wiphy) before calling process_abort. This is a deadlock: wdev_down holds wiphy_lock and blocks inside cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same wiphy_lock. Neither thread can proceed. The same deadlock is reachable from cfg80211_leave_locked(), which calls cfg80211_pmsr_wdev_down() for all interface types under wiphy_lock. Fix this by converting pmsr_free_wk from a plain work_struct to a wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running work items, so the explicit guard(wiphy) in the work function is no longer needed. wiphy_work_cancel() can be called safely while holding wiphy_lock - since wiphy_lock prevents the work from running concurrently, wiphy_work_cancel() never blocks, eliminating the deadlock. Remove the cancel_work_sync() for pmsr_free_wk from the NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally just before it, already cancels any pending work under wiphy_lock via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68323 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_is_known_peer(). The old lockless pre-check in tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer could both find it absent and add it twice. cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add() and add a peer after cleanup_bearer() has already emptied the list, leaking that entry when the bearer is freed. Mark the bearer disabled under rcast_lock once the list is emptied and refuse further additions. | ||||
| CVE-2026-68290 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer. | ||||
| CVE-2026-68241 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/mst: limit DP MST ESI service loop The loop in intel_dp_check_mst_status() keeps servicing interrupts originating from the sink without bound. Add an upper bound to the new interrupts occurring during interrupt processing to not get stuck on potentially stuck sink devices. Use arbitrary 32 tries to clear incoming interrupts in one go. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Note: The condition likely pre-dates the commit in the Fixes: tag, but this is about as far back as a backport has any chance of succeeding. Before that, the retry had a goto. (cherry picked from commit b4ea5272133059acb493cc36599071a9e852ec2e) | ||||
| CVE-2026-68233 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Shut down BO cache timer before teardown The BO cache timer callback schedules time_work, and time_work can rearm the timer through vc4_bo_cache_free_old(). vc4_bo_cache_destroy() deletes the timer and then cancels the work, which does not break that cycle: the work being cancelled can rearm the timer, and the timer then queues work again after teardown. Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the cycle ends with cancel_work_sync(). | ||||
| CVE-2026-64481 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs35l41: Fix firmware load work teardown cs35l41_hda creates ALSA controls whose private data points at the cs35l41_hda object. The firmware load control can also queue fw_load_work. Those controls are not removed on component unbind, and device remove only cancels fw_load_work through cs35l41_remove_dsp(). That helper is skipped when halo_initialized is false. With firmware_autostart disabled, a firmware load can be requested before the DSP has been initialized. If the component or device is removed before the queued work runs, the worker can run after teardown and dereference driver state that is no longer valid. Track the created controls and remove them on unbind so no new control callback can reach the driver data or queue more work. Then cancel fw_load_work to drain any request that was already queued. Also cancel the work unconditionally during device remove before runtime PM teardown. | ||||
| CVE-2026-64424 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netpoll: fix a use-after-free on shutdown path There is a use-after-free error on netpoll, which is clearly detected by KASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0 The problem happens when there is a pending TX worker running in parallel with the cleanup path. This is what happens on netpoll shutdown path: 1) __netpoll_cleanup() is called 2) set dev->npinfo to NULL 3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish 4) and kfree(npinfo); Because 3.1) doesn't really cancel the work, as the comment says "we can't call cancel_delayed_work_sync here, as we are in softirq", the TX worker can run after 4). Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through the work item via container_of(). Use disable_delayed_work_sync() to ensure the worker is completely stopped and prevent any future re-arming attempts. Once npinfo is set to NULL, senders will bail out and not queue new work. The disable flag ensures any in-flight re-arming attempts also fail silently. In the future, we can do the cleanup inline here without needing the npinfo->rcu rcu_head, but that is net-next material. | ||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||