Export limit exceeded: 46032 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46032 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80650 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization. | ||||
| CVE-2026-80628 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor the enqueue logic into a caller-locked helper so snd_seq_oss_readq_put_timestamp() updates its suppression state under the same lock instead of racing the reset path. The buggy scenario involves two paths, with each column showing the order within that path: reset path: locked readq updater: 1. snd_seq_oss_reset() or 1. A reader or callback producer release reaches takes q->lock on the same queue. snd_seq_oss_readq_clear(). 2. snd_seq_oss_readq_clear() 2. The updater tests or modifies resets qlen, head, tail, qlen, head, and tail. and input_time. 3. snd_seq_oss_readq_clear() 3. The updater completes its wakes sleepers on read-modify-write sequence. q->midi_sleep. 4. Without q->lock, the reset 4. The resulting ring state drives can overlap the locked later reads and readiness. update. KCSAN reports: BUG: KCSAN: data-race in snd_seq_oss_readq_clear / snd_seq_oss_readq_free write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0: snd_seq_oss_readq_free+0x6c/0x80 snd_seq_oss_read+0xcb/0x250 odev_read+0x38/0x60 vfs_read+0xff/0x600 ksys_read+0xb4/0x140 __x64_sys_read+0x46/0x60 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1: snd_seq_oss_readq_clear+0x1f/0x90 snd_seq_oss_reset+0xa7/0xf0 snd_seq_oss_ioctl+0x6f6/0x7e0 odev_ioctl+0x56/0xc0 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000001 -> 0x00000000 | ||||
| CVE-2026-80623 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117 | ||||
| CVE-2026-80611 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry. | ||||
| CVE-2026-74687 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer. | ||||
| CVE-2026-74672 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series has to deal with carefully. This mitigation resolves the issue by acquiring the mmap read lock on init_mm on vmap page table free if a ptdump is in progress. However the fix in this series would cause a deadlock if we were to simply apply it for arm64 without also reverting the change. This is because vmap may acquire the read lock before ptdump attempts to acquire the write lock, which then gets queued, and rwsem starvation rules mean that the (unacknowledged) nested mmap read lock in the arm64 code would also block, meaning the original read lock is never released and thus deadlock. This series works around this by #ifndef CONFIG_ARM64'ing the mmap read lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap support, and removing the ifdeffery with the partial revert patch. There are related issues that are also addressed in this series: * x86 page attribute logic, specifically Change Page Attributes (CPA), implements a feature whereby huge ranges can be collapsed into huge leaf entries. This can similarly cause a UAF when done in parallel with a ptdump walk, so similarly acquire the init_mm mmap lock to avoid this. * The CPA logic allows concurrent page table manipulation and CPA collapse, meaning the former risks accessing a page table the latter frees. Fix this by acquiring mmap write lock on init_mm across the whole CPA collapse operation and read lock on the page table manipulation. * x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm walks, and in x86's case arbitrary mm's), so we ensure kernel mappings remain stable by locking the init_mm as well as the mm being walked. The ordering of patches is established for both strict dependencies (the arm64 partial revert in particular has to be done after the vmap changes) and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA fixes are in place). This patch (of 3): Currently there is a nasty ra ---truncated--- | ||||
| CVE-2026-74537 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock. | ||||
| CVE-2026-74401 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dlm: fix add msg handle in send_queue ordered In a benchmark scenario triggering a lot of requests that triggers a lot of DLM messages on the network it can be that the mh->seq is not ordered according the oldest seq number. This ordering is required by dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older sequence numbers that are ordered in the tail of "node->send_queue". The side effects of not having it correct ordered regarding "before(mh->seq, seq)" are refcounting issues and use-after free. I only was able to reproduce this issue in a experimental DLM branch and a user space DLM benchmark that uses io_uring. After changing this I don't experienced any refcounting with the sending buffer issues anymore. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74345 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | ||||
| CVE-2026-74339 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | ||||
| CVE-2026-74318 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock cloning inline extent when using flushoncommit In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000 ---truncated--- | ||||
| CVE-2026-74308 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix kernel BUG in ext4_write_inline_data_end When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-74302 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. | ||||
| CVE-2026-74264 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up(). | ||||
| CVE-2026-72472 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach. Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead, this is inadequate since a single inode can have multiple nfs4_state instances. Therefore, the fix is to also use nfsi->rwsem in this case. Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), the functions nfs4_locku_done and nfs4_lock_done also break this rule because they call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding this protection could cause many deadlocks, so instead, the call to locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), it has been resolved after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering state recovery") because all slots are drained before calling nfs4_do_reclaim, which prevents concurrent stateid changes along this path. Also, nfs_delegation_claim_locks does not cause this concurrency either since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is sent, so nfs4_lock_done is not called. Therefore, nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first time the stateid is set. | ||||
| CVE-2026-72420 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72337 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary work item and schedules do_enable_set() on system_wq, then returns to debugfs. The debugfs active operation has ended at that point, but the worker still executes module text and manipulates enable_6lowpan and listen_chan. bt_6lowpan_exit() removes the debugfs files and immediately closes and puts listen_chan. It has no pointer to the queued work item, so it cannot cancel or flush it before tearing down the state that the worker uses. The buggy scenario involves two paths, with each column showing the order within that path: debugfs enable write module exit 1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes set_enable work the debugfs file 2. schedule_work() queues 2. bt_6lowpan_exit() closes do_enable_set() and puts listen_chan 3. the write operation returns 3. module teardown can continue 4. do_enable_set() later runs against stale state Run the enable state transition synchronously in lowpan_enable_set() instead. The simple debugfs setter can sleep, and this file already handles the 6LoWPAN control write synchronously under the same set_lock. Once the setter returns, debugfs removal covers the whole operation and exit can no longer race with an untracked work item. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0 Workqueue: events do_enable_set [bluetooth_6lowpan] The buggy address belongs to the object at ffff888109cb8000 | ||||