Export limit exceeded: 421031 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421031 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46172 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. | ||||
| CVE-2026-46170 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself". | ||||
| CVE-2026-46168 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. | ||||
| CVE-2026-46167 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening. | ||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | ||||
| CVE-2026-46162 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix double free in ice_sf_eth_activate() error path When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit(). | ||||
| CVE-2026-46161 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero. | ||||
| CVE-2026-46160 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated--- | ||||
| CVE-2026-46159 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data. | ||||
| CVE-2026-46158 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: always decrease sk refcount When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(). It should then be released in all cases at the end. Some (unlikely) checks were returning directly instead of calling sock_put() to decrease the refcount. Jump to a new 'exit' label to call __sock_put() (which will become sock_put() in the next commit) to fix this potential leak. While at it, drop the '!msk' check which cannot happen because it is never reset, and explicitly mark the remaining one as "unlikely". | ||||
| CVE-2026-46153 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: 8021q: delete cleared egress QoS mappings vlan_dev_set_egress_priority() currently keeps cleared egress priority mappings in the hash as tombstones. Repeated set/clear cycles with distinct skb priorities therefore accumulate mapping nodes until device teardown and leak memory. Delete mappings when vlan_prio is cleared instead of keeping tombstones. Now that the egress mapping lists are RCU protected, the node can be unlinked safely and freed after a grace period. | ||||
| CVE-2026-46151 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix heap leak in IEEE 1284 device ID via short response usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device. | ||||
| CVE-2026-46146 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3() The convert_chmap_v3() has a loop with its increment size of cs_desc->wLength, but we forgot to validate cs_desc->wLength itself, which may lead to potential endless loop by a malformed descriptor. Add a proper size check to abort the loop for plugging the hole. | ||||
| CVE-2026-46144 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Fix error unwind in mana_ib_create_qp_rss() Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal destroy path cleans it up. | ||||
| CVE-2026-46140 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: validate WMT event SKB length before struct access btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them. | ||||
| CVE-2026-46139 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: use kzalloc to zero-initialize security descriptor buffer Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces to le16") split struct smb_acl's __le32 num_aces field into __le16 num_aces and __le16 reserved. The reserved field corresponds to Sbz2 in the MS-DTYP ACL wire format, which must be zero [1]. When building an ACL descriptor in build_sec_desc(), we are using a kmalloc()'ed descriptor buffer and writing the fields explicitly using le16() writes now. This never writes to the 2 byte reserved field, leaving it as uninitialized heap data. When the reserved field happens to contain non-zero slab garbage, Samba rejects the security descriptor with "ndr_pull_security_descriptor failed: Range Error", causing chmod to fail with EINVAL. Change kmalloc() to kzalloc() to ensure the entire buffer is zero-initialized. [1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 | ||||
| CVE-2026-46136 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix a potential clc buffer length underflow The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure. | ||||
| CVE-2026-46132 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack without initialisation: struct ifla_vf_broadcast vf_broadcast; The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; }; The function then copies dev->broadcast into it using dev->addr_len as the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len); On Ethernet devices (the overwhelming majority of SR-IOV NICs) dev->addr_len is 6, so only the first 6 bytes of broadcast[] are written. The remaining 26 bytes retain whatever was previously on the kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) leaking up to 26 bytes of uninitialised kernel stack per VF per RTM_GETLINK request, repeatable. The other vf_* structs in the same function are explicitly zeroed for exactly this reason - see the memset() calls for ivi, vf_vlan_info, node_guid and port_guid a few lines above. vf_broadcast was simply missed when it was added. Reachability: any unprivileged local process can open AF_NETLINK / NETLINK_ROUTE without capabilities and send RTM_GETLINK with an IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per VF per request. Stack residue at this call site can include return addresses and transient sensitive data; KASAN with stack instrumentation, or KMSAN, will flag the nla_put() when reproduced. Zero the on-stack struct before the partial memcpy, matching the existing pattern used for the other vf_* structs in the same function. | ||||
| CVE-2026-46130 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read. | ||||
| CVE-2026-46127 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp() Sashiko points out that pd->uctx isn't initialized until late in the function so all these error flow references are NULL and will crash. Use the uctx that isn't NULL. | ||||