Export limit exceeded: 386950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 96470 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (96470 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74747 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed. | ||||
| CVE-2026-80520 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix NULL dereference when killing missing key ovpn_crypto_kill_key assumes both crypto slots are populated and dereferences each slot before checking it. That is not guaranteed: a peer can have only one installed key, and the kill path may be asked to remove a key that is not present. Read each slot once while holding the crypto state lock, check for NULL before looking at key_id, and only replace the slot that actually matches. | ||||
| CVE-2026-74741 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences wx->msix_entry->entry, leading to a NULL pointer dereference crash. This issue was introduced by fixing the IRQ vector when the number of VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to determine the correct vector index. Additionally, as a side fix, set the interrupt mask to BIT(0) for the non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts share vector 0, and the WX_PX_MISC_IVAR register is only valid in the MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause when MSI-X is disabled. | ||||
| CVE-2026-80559 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: sur40 - fix input device registration ordering In sur40_probe(), input_register_device() was previously called early before the V4L2 video device and vb2_queue components were fully initialized. If userspace opened the input device immediately upon registration, sur40_open() would trigger and start the sur40_poll() worker thread. This worker thread invokes sur40_process_video() and accesses the uninitialized vb2_queue structure, leading to a data race and potential system crash. Furthermore, if V4L2 or video registration failed after input_register_device() succeeded, the error path fell through to calling input_free_device() on a successfully registered device instead of input_unregister_device(), corrupting input core state. Move input_register_device() to the very end of sur40_probe(). This ensures the V4L2 and video queue structures are fully initialized before polling can start, and naturally resolves the error path bug since input_free_device() is now only called when input registration has not yet occurred. To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move input_unregister_device() to the very beginning of sur40_disconnect(). This guarantees that the input polling worker thread is stopped before V4L2 video components or control handlers are unregistered. | ||||
| CVE-2026-74739 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-80546 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve CCA CPRB length and overflow checks The xcrb_msg_to_type6cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Integer overflow after CEIL4 alignment: Signed int variables could overflow during 4-byte boundary alignment, causing undersized buffer allocations or incorrect bounds checking. 2. Missing minimum size validation: The CPRBX structure is copied from userspace without verifying sufficient buffer length. Undersized buffers cause uninitialized memory access when reading structure fields like cprbx.cprb_len and cprbx.domain. 3. Arithmetic overflow in sum calculations: Adding control block and data block sizes could overflow, bypassing size checks and enabling buffer overflows. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, validating minimum control block size before copying from userspace, and detecting sum calculation overflows. | ||||
| CVE-2026-80531 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid UAF on sc->tempip in xrep_tempfile_create LOLLM noticed a potential UAF if the tempfile creation code fails after it set sc->tempip. Fix that. | ||||
| CVE-2026-80433 | 2026-08-27 | 7.5 High | ||
| Subscriber Sensitive Data Exposure in SureFeedback Client Site <= 1.2.12 versions. | ||||
| CVE-2026-80568 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - block s_input when F54 queue is busy Changing the input (diagnostic report type) mid-stream changes the report size. Since V4L2 buffers are allocated based on the size at stream start, changing the input while streaming could lead to a heap buffer overflow if the new size is larger than the allocated buffers. Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue is busy (streaming). | ||||
| CVE-2026-80523 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: k3: set hdma clock as critical HDMA clock is responsible for the internal TCM access path of X100 RISC-V core, so set the clock flag as critical to prevent it from being shut off, otherwise the Linux system will hang, for example in the case of a vector instruction access generates a page fault. | ||||
| CVE-2026-80527 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ] | ||||
| CVE-2026-80580 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full. | ||||
| CVE-2026-80584 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from kzalloc(), which the existing NULL check does not catch. Reject buffers smaller than udata_offset before allocating, so the callback subtraction can no longer underflow. | ||||
| CVE-2025-3511 | 2026-08-27 | 7.5 High | ||
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, MELSEC iQ-F Series FX5-ENET/IP Ethernet Module, and MELSEC iQ-R Series CPU module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. | ||||
| CVE-2026-80550 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Fix out of bounds check on CCW array The routine ccwchain_calc_length() counts the number of channel command words (CCWs) that are chained together in a single channel program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs. The loop itself is "do..while (count < 257)", and while the logic in is_cpa_within_range() correctly adjusts between the 0-index array of CCWs and the count of CCWs starting at 1, this means it would look at a possible 257th CCW before ending the loop and (correctly) returning an error. Fix this by restructuring the loop to break as soon as 256 CCWs (thus indexes 0-255) are examined, without looking at memory outside the range. | ||||
| CVE-2026-80538 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: propagate errors from xfs_rtginode_load xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than -ENOENT as success. This can leave the realtime group inode unset after an I/O, allocation, or corruption error. Growfs then continues as though the inode had been loaded. Only -ENOENT means that the inode needs to be created. Return all other errors to the growfs caller. | ||||
| CVE-2026-80537 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-79292 | 1 Google | 1 Chrome | 2026-08-27 | 8.3 High |
| Integer overflow in Chromecast in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-79286 | 1 Google | 2 Android, Chrome | 2026-08-27 | 7.4 High |
| Missing authorization in CustomTabs in Google Chrome on on Android prior to 152.0.7977.65 allowed a local attacker to potentially execute arbitrary code outside the sandbox via a co-installed app. (Chromium security severity: Medium) | ||||