Export limit exceeded: 54155 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54155 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98745 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems When system_supports_sme() is true but system_supports_sve() is false, restoring a specifically crafted SVE signal context can result in the task erroneously having non-streaming SVE state. Subsequent attempts to manipulate the task's FPSIMD/SVE/SME state can result in a variety of problems, including fatal EL1 UNDEFs. In such configurations, the kernel always creates an SVE signal context when delivering a signal, and this can only be in one of two states: (1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing streaming mode SVE state. The recorded VL is the task's live streaming VL. (2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The FPSIMD context contains the non-streaming mode FPSIMD state. The recorded VL is 0. Currently restore_sve_fpsimd_context() correctly rejects cases where SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is present. Consequently, restore_sve_fpsimd_context() can place the task in a state where it has non-streaming SVE state even when this is not supported by HW. For example, this can cause a later EL1 UNDEF when the kernel attempts to restore the task's ZCR_EL1 value: | # ./sme-sigcontext-to-sve | Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : fpsimd_restore_current_state+0x258/0x458 | lr : exit_to_user_mode_loop+0xb8/0x188 | sp : ffff80008056be40 | x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040 | x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000 | x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0 | x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300 | x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401 | x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002 | x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001 | x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000 | Call trace: | fpsimd_restore_current_state+0x258/0x458 (P) | exit_to_user_mode_loop+0xb8/0x188 | el0_svc+0x1cc/0x1d0 | el0t_64_sync_handler+0xa0/0xe4 | el0t_64_sync+0x198/0x19c | Code: d5384101 f9400020 53175c03 36b80de0 (d5381202) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt | Kernel Offset: 0x291fb1000000 from 0xffff800080000000 | PHYS_OFFSET: 0x40000000 | CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f | Memory Limit: none Rework restore_sve_fpsimd_context() to reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME are supported, it isn't necessary for restore_sve_fpsimd_context() to handle the case where neither are supported. | ||||
| CVE-2026-98732 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. | ||||
| CVE-2026-98726 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. | ||||
| CVE-2026-98687 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject oversized XDomain properties responses tb_xdp_properties_request() allocates room for 45 data dwords in its 252-byte response buffer. The XDomain length field is six bits wide, however, and a malicious peer can set it to 63. After the fixed response fields are subtracted, the driver treats this as 48 data dwords. Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to allocation size") only bounds the copy against data_len. If data_len is at least 48, memcpy() reads 192 bytes from the 180-byte res->data array, causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478 ("thunderbolt: Limit XDomain response copy to actual frame size") limits the earlier copy but does not constrain this header-derived length. Reject response data lengths that exceed the allocated source buffer before copying them into the assembled property block. | ||||
| CVE-2026-98660 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup The sampling frequency tables store each frequency as an integer part and a fractional part in micro units. num_sampling_freq_avail is initialized to the number of flattened integer elements because read_avail() returns the table as a flat array. bmp280_write_sampling_frequency(), however, indexes the same table as a two-dimensional array and uses num_sampling_freq_avail as the number of rows. Convert the flattened element count back to the number of rows before iterating over the table. | ||||
| CVE-2026-98484 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vlan: require the MAC header to be present in __vlan_insert_inner_tag() __vlan_insert_inner_tag() only guarantees head room via skb_cow_head(), never that mac_len bytes of MAC header are present. Its ETH_HLEN wrappers - __vlan_insert_tag() under skb_vlan_push(), and vlan_insert_tag() under validate_xmit_vlan() on the generic transmit path - therefore rewrite the first 16 bytes at skb->data: a 12-byte memmove plus two 2-byte stores at +12 and +14. No caller supplies the bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull(). An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a hwaccel tag; the next - clsact "action vlan push" or bpf_skb_vlan_push() - enters the helper with skb->len still 1. The head comes from skbuff_small_head without __GFP_ZERO, so each push drags bytes from beyond skb->tail into the frame. After three the one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised slab: 0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81 `------------------------------' only 0x5a was sent; the rest is slab, here the top 56 bits of a linear-map address Require the MAC header the helper rewrites to be present, so such a frame is dropped rather than transmitted. | ||||
| CVE-2026-98375 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/netfront: drop RX packets with a short Ethernet header handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. | ||||
| CVE-2026-98193 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. | ||||
| CVE-2026-98171 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. | ||||
| CVE-2026-98170 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small". | ||||
| CVE-2026-98169 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. | ||||
| CVE-2026-97615 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch. | ||||
| CVE-2026-97613 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq(). | ||||
| CVE-2026-97599 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: hwsim: serialize pib updates to fix double-free hwsim_update_pib() does an unserialized read-swap-free of phy->pib: pib_old = rtnl_dereference(phy->pib); ... rcu_assign_pointer(phy->pib, pib); kfree_rcu(pib_old, rcu); It assumes the RTNL is held, but ->set_channel is not always called under it: the mac802154 scan worker changes channels via drv_set_channel() without the RTNL. Such an update can race an RTNL-held one on the same phy; both read the same pib_old and both kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves batching kfree_rcu(), this surfaces as a KASAN invalid-free in rcu_free_sheaf(). struct hwsim_phy has no lock for pib. Add one and make the swap atomic with rcu_replace_pointer() under it, dropping the misleading rtnl_dereference(). | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97559 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond what a u16 can hold. A wraparound is reached with 863 ACEs. After the wraparound, ndacl_ptr->size becomes meaningless and the offset will point anywhere in the ACE array. As a result, we will see corruption of the DACL, which then gets sent to the server. This is not an out-of-bounds write as the allocation now covers the worst-case expansion, so writes will always go into the buffer. Adjust the code to use a u32 internally and return -EOVERFLOW in the overflow case. The operation must be refused, because a DACL can only hold 2^16-1 bytes on the wire and larger DACLs cannot be represented. set_chmod_dacl() carries the same pattern and is fixed the same way. It only wraps once the source DACL comes within roughly 380 bytes of the 64K ceiling, but the failure mode is identical. | ||||
| CVE-2026-97532 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to probe_hw_failed and calls qla2x00_mem_free(). Several error labels in qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool, flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info) but left the pointers dangling. qla2x00_mem_free() then freed them a second time. Worse, for the dma_pool members it issued dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool. Clear each freed pointer (and its DMA handle) in the error labels so the subsequent qla2x00_mem_free() skips them. | ||||
| CVE-2026-97529 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). | ||||