| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: emac: Fix NULL pointer dereference in emac_probe
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Fix slave registration race and error handling
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nat: reject unsupported target families
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ] |
| A database user able to create a view in a namespace that MongoDB Connector for BI samples can cause the schema-sampling routine to stop functioning by defining a view whose evaluation reliably fails. The sampling logic classifies the resulting server message as transient and, after the configured retries are exhausted, proceeds without a valid result, ending the schema refresh routine. The mongosqld process continues running without a usable schema, so SQL clients are unable to obtain results until an operator removes the view or excludes its namespace from sampling. |
| PLANET GS-4210-16P2S firmware before 3.441b260626 contains an authenticated null pointer dereference vulnerability in /cgi-bin/dispatcher.cgi. The web_poe_alive_rmtip_post handler dereferences the rmtIP parameter without verifying its presence. A remote authenticated attacker can send a crafted request omitting the rmtIP parameter to cause the CGI process to dereference a null pointer and crash, resulting in denial of service of the web management interface. |
| A NULL
pointer dereference vulnerability exists in TL-WR841N v14 in the UPnP service when processing
SOAP state variable query requests. A specially crafted SOAP query may trigger
unexpected termination or instability of the process hosting the UPnP service.
Successful
exploitation may result in a denial-of-service condition affecting UPnP
discovery, state query, or related management functionality until the affected
process is restarted or the device is rebooted. |
| A NULL
pointer dereference vulnerability exists in TL-WR841N v14 in the UPnP service when processing SOAP action requests. A specially crafted SOAP action request containing unexpected XML content may cause the UPnP daemon to terminate unexpectedly.
Successful exploitation may result in a denial-of-service condition affecting UPnP functionality until the service is restarted or the device is rebooted. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability
dwc_pcie_rasdes_debugfs_init() returns success when the controller has no
RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common
debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which
dereferences rasdes_info unconditionally.
Return early when no RAS DES state was allocated. In that case no RAS DES
mutex was initialized, so there is nothing to destroy.
[mani: reworded subject] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use proper context for logging
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: revert ct extension genid infrastructure
This infrastructure is not used anymore after moving ct timeout and
helper to use datapath refcount to track object use.
Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension
genid count") this patch disables all ct extensions (leading to NULL)
for unconfirmed conntracks, when this is only targeted at ct helper and
ct timeout. There is also codebase that dereferences the ct extension
without checking for NULL which could lead to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove()
Attempting to access driver data in the platform driver ->remove()
callback may lead to a null pointer dereference since there is no
guaranty that the component ->bind() callback invoking
platform_set_drvdata() was executed.
A common scenario is when Rockchip DRM driver didn't manage to run
component_bind_all() because of an (unrelated) error causing early
return from rockchip_drm_bind().
Drop the unnecessary call to platform_get_drvdata() and, instead,
reference the target device structure via platform_device. |
| SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - validate custom data from user space
cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect
straight from the ff_effect the user passed to EVIOCSFF, without
requiring it to hold anything:
work_data.custom_data = memdup_array_user(periodic->custom_data,
periodic->custom_len,
sizeof(s16));
work_data.custom_len = periodic->custom_len;
The driver then reads two words out of that buffer: custom_data[0] as the
waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the
index within the bank in cs40l50_effect_index_set(). Neither read is
covered by a length check, and custom_len is fully user controlled:
- custom_len == 0 makes memdup_array_user() call memdup_user() with a
length of zero, which returns ZERO_SIZE_PTR rather than an error, so
custom_data[0] dereferences it.
- custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps
effect->type out of the OWT case, and custom_data[1] is then read one
word past the allocation.
The bank value itself is also mishandled. It is masked with
CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a
custom_data[0] of 0x8000 or above wraps to a negative value that passes
the "bank_type >= CS40L50_WVFRM_BANK_NUM" test.
cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the
switch statement's default case gets a chance to reject it:
base_index = vib->dsp.banks[effect->type].base_index;
max_index = vib->dsp.banks[effect->type].max_index;
Require the two words the driver reads to be present, and hold the masked
bank in a u32 so the existing upper-bound test covers the whole range.
The da7280 haptic driver already range checks custom_len this way. |
| PLANET GS-4210-16P2S firmware before 3.441b260626 contains authenticated stack buffer overflow and null pointer dereference vulnerabilities in /cgi-bin/dispatcher.cgi. The web_radiusSrv*_post family of handlers copies the radKey, radKey_0, radDftParamKey, radName, and radIp POST parameters into fixed-size stack buffers without length validation, and additionally dereferences radName and radIp without verifying their presence in the request. A remote authenticated attacker can send crafted requests to crash the CGI process or web management service, resulting in denial of service. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.0.0 through 4.14.6, a malicious or man-in-the-middle enrollment manager can crash a Wazuh agent during enrollment by returning a malformed key response with fewer than four fields, causing a NULL pointer dereference. The w_enrollment_process_agent_key() routine splits the manager-provided key into four space-separated fields but does not verify that all fields are present before passing them to validators. Because OS_StrBreak() leaves missing trailing entries as NULL and OS_IsValidName() calls strlen() on its argument without a NULL check, a response such as OSSEC K:'1' reaches OS_IsValidName(NULL) and terminates the agent process. Since Wazuh permits enrollment against an unverified manager when no CA certificate is configured, an attacker operating a rogue manager or intercepting the enrollment flow can deterministically crash agents, resulting in denial of service. This issue is fixed in version 4.14.7. |
| Nokogiri before 1.14.3 (CRuby implementation only, when using the packaged libxml2) bundles libxml2 v2.10.3, which is vulnerable to NULL pointer dereferences in XML Schema processing (xmlSchemaFixupComplexType, CVE-2023-28484, and xmlSchemaCheckCOSSTDerivedOK). An attacker who supplies a crafted/malformed XML schema can cause libxml2 to dereference a NULL pointer and potentially segfault, resulting in a denial of service. Nokogiri 1.14.3 upgrades the packaged libxml2 to v2.10.4 to resolve these issues. |
