| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WWBN AVideo (current e01e41ecc and earlier) contains a brute-force rate limiting bypass in enforceRateLimit(), which protects login.json.php and 13 other endpoints. The function stores its attempt counter via a cache layer (ObjectYPT::setCacheGlobal) that silently discards writes for any client identified as a bot by isBot(). Because isBot() treats a missing User-Agent header as a bot by default — and also matches common bot identifiers such as 'curl', 'bot', 'crawler', and 'spider' — the counter never increments for such clients, so the rate limit never fires. An unauthenticated attacker can therefore submit unlimited login attempts (e.g., by omitting the User-Agent header or using curl's default User-Agent), enabling unrestricted password-guessing attacks. |
| WWBN AVideo contains an unauthenticated credential submission vulnerability in plugin/Live/api/preauthorize.json.php that accepts credentials over GET without rate limiting. Attackers can submit correct credentials repeatedly to trigger uncapped two-factor confirmation emails and perform sustained password guessing attacks against user accounts. |
| The affected Ebyte device does not restrict repeated authentication
attempts through rate limiting or account lockout mechanisms. This could
allow an attacker to perform automated authentication attacks against
deployments that rely on password based authentication. |
| WatchGuard Dimension's web login endpoint does not enforce effective rate-limiting or account lockout by default allowing a remote attacker to perform automated password guessing against user accounts. If the account lockout setting is enabled, brute-force attempts are blocked after a defined number of failed attempts, but this setting is not enabled by default. |
| Punk::Plugin::TOTP versions before 0.05 for Perl allow the second-factor attempt limit to be reset by replaying an earlier session cookie because the challenge route counts failures in the session.
The POST handler on challenge_path keeps the failure count as tries inside the totp_pending record in the session, raising it on each rejected code and deleting the pending record once it reaches attempts, five by default. Punk::Session carries the session in a signed cookie unless the application declares a store, and keeps no server-side record, so an earlier value of the same session stays valid until the expiry stamped inside it. A client that saves the cookie before its failed attempts and presents it again gets the pending record back with its counter, and the limit never fires. The replayed record is accepted while its own expiry, pending_ttl seconds from the challenge and 300 by default, has not passed.
Sessions declared with a store are not affected: the pending record and its counter then live server-side.
The attempt limit does not bound guessing of the second factor, which is left to the per-address rate limit the plugin registers on the same path, 30 requests per 60 seconds. |
| Typebot is an open-source chatbot builder. In self-hosted versions up to and including 3.17.1, the default passwordless email magic-link authentication is vulnerable to login-code brute forcing that leads to account takeover. The email provider overrides NextAuth's default cryptographically secure token with a 6-digit code generated using Math.random(), reducing the keyspace to 900,000 with a 10-minute expiry, and the code itself is the raw value placed in the magic link. The verification callback enforces no attempt limit, lockout, or CSRF protection, and an incorrect guess does not consume the real code because the adapter returns null on a not-found token, so a valid code survives unlimited guessing within its lifetime. The only rate limiter applies to the code-sending path and is keyed on the client-controlled X-Forwarded-For header, allowing an attacker to request many concurrent live codes for one victim and further raise the odds of a matching guess. As a result, an anonymous attacker who knows a victim's email address can brute-force the callback and obtain an authenticated session as that user with no victim interaction, gaining full access to the victim's bots, results, and connected integration credentials. Deployments configured for OAuth or SSO only, with no email provider, are not affected. This issue is fixed in version 3.18.0 |
| IBM Langflow OSS 1.0.0 through 1.9.6 could allow a remote attacker to obtain unauthorized access to user accounts due to improper restriction of excessive authentication attempts. |
| Rocket.Chat exposes the sendForgotPasswordEmail Meteor method without a DDP rate limit, so an unauthenticated caller may invoke it as often as it likes. The method is reachable over DDP and over the HTTP route POST /api/v1/method.callAnon/sendForgotPasswordEmail, and it triggers a password reset message for any address that matches an account. With no DDPRateLimiter rule registered for it, a caller can drive an unbounded volume of reset mail at a chosen address from the deployment's own mail sender, and can probe addresses at scale: the method answers true for an address with no account and for a successful send, but false when the address belongs to an account that authenticates through an external provider and Accounts_AllowPasswordChangeForOAuthUsers is off, so repeated calls distinguish that class of account. Later versions register a rule permitting ten calls per minute per client address. |
| RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header. |
| HCL Hive is affected by a missing rate limit which could allow an attacker unauthorized access via brute-force or credential stuffing attacks, or cause a denial of service. |
| SiYuan versions before 3.7.4 contain an unthrottled brute-force vulnerability in the Publish Service Basic Auth implementation (PublishServiceTransport.RoundTrip() in kernel/server/proxy/publish.go). The Publish Service runs on a separate, unauthenticated-by-default listener (default TCP port 6808) and gates named publish-viewer accounts (Conf.Publish.Auth.Accounts) with Basic Auth that has no rate limiting, per-account lockout, or backoff. Unauthenticated remote attackers can submit unlimited password guesses against named accounts to gain access to published notes/notebooks. |
| Monkeytype is a minimalistic and customizable typing test. In 26.26.0 and earlier, the backend rate-limit key generator in backend/src/middlewares/rate-limit.ts uses client-controlled cf-connecting-ip and x-forwarded-for headers before the trust-proxy-derived req.ip value. An unauthenticated attacker can rotate either header to create a new bucket for each request, bypassing rootRateLimiter, badAuthRateLimiter, getKey(), and the getKeyWithUid() fallback used by public endpoints. This permits repeated POST /users/forgotPasswordEmail and verificationEmail requests, mail bombing registered users, consuming Firebase or SMTP quota, evading brute-force protection, and enabling resource exhaustion. Exploitability of cf-connecting-ip depends on deployment topology, but x-forwarded-for and direct-to-origin paths remain affected when those values are not overwritten by a trusted proxy. No fixed version is available as of this review. |
| phpMyFAQ before 4.1.7 contains a brute-force vulnerability in the two-factor authentication step where the failure counter is session-scoped and reset on each successful password re-authentication. Attackers with a valid password can bypass the five-attempt limit by obtaining a fresh session cookie and repeatedly re-authenticating to reset the counter, enabling unbounded TOTP code guessing. |
| Plainpad through 1.1.1, fixed in commit d3823fc, contains a missing rate limiting vulnerability that allows unauthenticated attackers to send unbounded login requests to the POST /v1/sessions endpoint due to dead code in App\Http\Kernel.php that is never instantiated under the Laravel 11+ skeleton, leaving the API throttle configuration unattached to any route. Attackers can exploit this by sending unlimited credential attempts with no lockout or CAPTCHA enforcement, and additionally trigger CPU exhaustion by forcing repeated bcrypt comparisons on each request. |
| A vulnerability was found in karakeep-app karakeep up to 0.32.0. The affected element is the function authorize of the file apps/web/server/auth.ts of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is described as difficult. The exploit has been made public and could be used. Upgrading to version 0.33.0 is sufficient to fix this issue. The patch is identified as f7d042971d0d2bcc7119654830cf1eb93eabbf24. It is advisable to upgrade the affected component. |
| SiYuan before 3.7.4 contains an improper restriction of excessive authentication attempts vulnerability in the authFilePublishAccess endpoint that allows unauthenticated attackers to brute-force per-notebook publish passwords. Attackers can submit unbounded password guesses without rate limiting or CAPTCHA to gain access to password-protected published notebooks. |
| SiYuan kernel versions before 3.7.4 contain an improper restriction of excessive authentication attempts vulnerability in the CheckAuth() middleware. The middleware accepts the API token (Conf.Api.Token) via an Authorization header (Token/Bearer) or a ?token= query parameter, and neither path is protected by the application's CAPTCHA/lockout mechanism (NeedCaptcha/WrongAuthCount). As a result, an unauthenticated remote attacker can perform unlimited automated guesses of the API token, particularly when a short or weak custom token has been configured, and upon success gains full RoleAdministrator access enabling arbitrary file operations and SQL queries. |
| UnixAuth lacks brute-force protection in Apache Ranger versions <= 2.8.0.
Note: UnixAuth is NOT a recommended option for production deployments.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| SiYuan before v3.7.4 improperly restricts excessive authentication attempts in the CheckAuth() middleware. The HTTP Basic Authentication branch, which guards nearly the entire /api/* surface, accepts the workspace access code (Conf.AccessAuthCode) as the Basic Auth password but never consults the CAPTCHA/lockout gate or increments the failure counter used by the cookie/session login path. This allows unauthenticated remote attackers to brute-force the admin access code with unlimited automated requests and obtain full RoleAdministrator access to the kernel. A secondary weakness exists because the access code is compared using a non-constant-time string comparison. |
| A vulnerability was detected in opensourcepos Open Source Point of Sale up to 3.4.2. This affects the function Login::index of the file app/Config/Filters.php of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
