| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to unbounded resource allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Repost Receive buffers for malformed replies
rpcrdma_wc_receive() decrements the transport's Receive count for
every completion before it dispatches a successful Receive to
rpcrdma_reply_handler(). The handler must post a replacement
Receive WR before returning unless ownership of the rep has moved
elsewhere, as on the backchannel path.
Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC
senders and posting Receives") moved the Receive refill out of
rpcrdma_wc_receive(), where it had run ahead of every reply, into
rpcrdma_reply_handler() so that the responder's credit grant could
be parsed before reposting. The bad-version and short-reply exits
never reach that refill: they recycle the rep and return without
calling rpcrdma_post_recvs().
A remote peer can therefore drain the client's posted Receive
queue by sending a sustained stream of replies that are shorter
than the fixed transport header or that carry an unrecognized
RPC/RDMA version. Each such reply consumes one posted Receive
without replacing it. Once the queue empties, the peer's next
Send finds no posted Receive and the transport stalls until
reconnect.
Route both malformed-reply exits through the shared repost tail
after recycling the rep, refilling against buf->rb_credits, the
most recent accepted credit grant. Neither exit updates the
congestion window, so RPCs admitted under the previous grant
remain in flight awaiting replies. A smaller refill target would
let a stream of malformed replies ratchet the posted Receive count
down to the batch floor while the congestion window still admits
rb_credits RPCs; a burst of valid replies to those RPCs could then
overrun the posted Receives, and because the client connects with
rnr_retry_count of zero, a single RNR NAK terminates the
connection. Refilling against rb_credits also restores the target
that applied to malformed replies before commit 2ae50ad68cd7
("xprtrdma: Close window between waking RPC senders and posting
Receives") when rpcrdma_post_recvs() computed it from rb_credits
internally. rb_credits is at least one from connection
establishment onward, so the repost path always keeps Receives
posted. |
| Allocation of resources without limits or throttling in Windows Kernel allows an unauthorized attacker to deny service over a network. |
| Scriban before 7.2.0 contains a denial of service vulnerability in the array.insert_at function that allocates unbounded null entries without respecting LoopLimit or LimitToString constraints. Attackers can supply a large index parameter to trigger OutOfMemoryException and crash the host process in under a second. |
| Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion. |
| Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte buffer using index-based backtracking for '..' segments, eliminating the quadratic time complexity and significantly reducing memory allocations. |
| rsync 3.4.2 before 3.5.0 contains a denial of service vulnerability that allows a remote sender to exhaust system resources by specifying the --zt short alias for --compress-threads, which bypasses the refuse options directive's string matching on long option names. Attackers can specify --zt=N with a large value to spawn an unbounded number of Zstandard worker threads on the receiver, exhausting available thread and memory resources. |
| When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this. |
| Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key derivation operations indefinitely. |
| @hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.26.0, the /v1/completions CompletionRequest.prompt field in vllm/entrypoints/openai/completion/protocol.py accepts an unbounded list[str] or list[list[int]], prompt_to_seq() in vllm/renderers/inputs/preprocess.py and OnlineRenderer.preprocess_completion() in vllm/renderers/online_renderer.py expand every element, and vllm/entrypoints/openai/completion/serving.py creates one engine generator and response slot per prompt, allowing an authenticated API client to exhaust CPU, memory, async scheduling capacity, engine request slots, and response buffering with one request. This issue is fixed in version 0.26.0. |
| rsync daemon 2.0.0 before 3.5.0 contains a denial of service vulnerability that allows unauthenticated remote attackers to exhaust daemon connection slots by stalling the handshake process before or after module selection without triggering the I/O timeout. Attackers can open many simultaneous connections and trickle data at the minimum rate to avoid timeout, or stall entirely before module selection where no timeout applies, consuming all available connection slots and denying service to legitimate clients. |
| rsync before 3.5.0 contains an algorithmic complexity vulnerability in the hash_search() function that allows a remote attacker to cause a denial of service by delivering a carefully constructed file list. A sender can exploit the quadratic-time worst-case behavior in hash lookups to exhaust receiver CPU resources with a modest number of crafted entries, causing a sustained denial of service. |
| Laravel Nova 3.7.0 contains a denial of service vulnerability that allows authenticated users to crash the application by manipulating the 'range' parameter. Attackers can send simultaneous requests with an extremely high range value to overwhelm and crash the server. |
| A vulnerability was found in TRENDnet TEW-816DRM GURNC4.OT182B-C-TN-R1B028-US.EN. This impacts an unknown function of the file /etc/bftpd.conf of the component bftpd. The manipulation of the argument USERLIMIT_GLOBAL results in allocation of resources. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, index.js retains every distinct `(queries, context)` result in cache and every parseQueries() AST in parseCache without a size cap, TTL, or eviction, allowing an attacker who can influence repeated browserslist() query values, including valid since `<year>-<month>-<day>` queries, to bypass the caller-controlled BROWSERSLIST_DISABLE_CACHE mitigation and cause linear memory growth followed by an out-of-memory process crash. This issue is fixed in version 4.28.7. |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user who is authorized to manage maintenance windows could submit a specially crafted, malformed payload that causes the Kibana process to consume excessive resources. Kibana becomes unresponsive for all users and does not recover without manual intervention. |
