| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution. |
| Starman versions before 0.4019 for Perl allow CPU exhaustion via quadratic regex backtracking when parsing chunked request bodies.
Starman decodes chunked request bodies before calling the application, matching each chunk-size line with `s/^(([0-9a-fA-F]+).*\015\012)//`. A line of hex digits followed by a bare LF and then CRLF never matches, because `.` does not match LF, and each failed attempt backtracks in time quadratic in the length of the hex run. Nothing limits the length of the line.
A remote attacker can exhaust worker CPU by sending such requests to any route. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on refill retry
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix double-free in nvif_vmm_dtor
On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear
the client down. Then, nouveau_drm_open() also enters into its
cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini()
calls nouveau_vmm_fini():
void
nouveau_vmm_fini(struct nouveau_vmm *vmm)
{
nouveau_svmm_fini(&vmm->svmm);
nvif_vmm_dtor(&vmm->vmm);
vmm->cli = NULL;
}
Inside nvif_vmm_dtor(), vmm->page is freed unconditionally:
void
nvif_vmm_dtor(struct nvif_vmm *vmm)
{
kfree(vmm->page);
nvif_object_dtor(&vmm->object);
}
vmm->page is never cleared after being freed, so the second call of
nvif_vmm_dtor() will cause a double-free.
Found by fuzzing the nouveau driver with a modified Syzkaller:
BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
Free of addr ffff888010fcdc30 by task syz.0.173/2567
CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557
check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235
kasan_slab_pre_free include/linux/kasan.h:199 [inline]
slab_free_hook mm/slub.c:2622 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x192/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6d687594d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d
RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c
RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760
</TASK>
Allocated by task 2567 on cpu 1 at 163.593900s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237
nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134
nouveau_cli_init+0x7b9/0
---truncated--- |
| GitPython before 3.2.0 contains a regular expression denial of service vulnerability in the _re_actor_epoch pattern used by parse_actor_and_date on author, committer, and tagger lines. Attackers can serve repositories with commit or tag objects containing long space-filled lines lacking a valid epoch or timezone, causing quadratic backtracking and CPU exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning.
The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset.
The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination.
The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. |
| toml-node is a TOML parser for Node.js and the browser. Prior to 5.0.1, the toml.parse() compiler's addTableArray() function in lib/compiler.js rescans the complete assignedPaths and valueAssignments bookkeeping sets for every array-of-tables header. Distinct [[name]] paths are not pruned, so a document with many such headers causes quadratic synchronous work and can block the Node.js event loop, denying service to other operations in the process. This issue is fixed in version 5.0.1. |
| Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a malformed padded HTTP/2 DATA frame.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Craft CMS allows any authenticated control panel user to submit an element-search condition whose element selector is evaluated as a sandboxed Twig object template. Craft’s allowed column filter delegates property lookup to Yii ArrayHelper, outside Twig’s SecurityPolicy. Repeated single-segment lookups therefore bypass the sandbox’s empty property/method allowlists.
The vulnerable condition value is ultimately cast to an integer. That does not protect the secret: the template can return author ID 1 when a guessed key character is correct and an impossible ID otherwise. The JSON endpoint returns entries for the first case and an empty array for the second, forming a stable remote character oracle.
After recovering GeneralConfig::securityKey, the same user can compute Craft’s generic HMAC wire format offline. Signed parameters such as redirect are then accepted and passed to unsandboxed View::renderObjectTemplate(), where Twig’s string-callable form can invoke native PHP callables. The regression proof uses the harmless substr() callback and observes abcdef becoming cdef; it does not execute an OS command. |
| Open WebUI from 0.11.0 before 0.11.4 contains a regular expression denial of service vulnerability that allows authenticated users to stall server workers via file search patterns. Attackers can instruct the model to call grep_knowledge_files or grep_chat_files with a catastrophically backtracking regex, blocking the event loop for two seconds per repeated call. |
| GraphQL Scalars is a library of custom GraphQL scalars for creating precise type-safe GraphQL schemas. From 1.24.1 until 2.0.1, GraphQLPhoneNumber in src/scalars/PhoneNumber.ts uses ambiguous nested digit quantifiers that backtrack exponentially when a PhoneNumber value contains a run of digits followed by a character that makes the match fail. GraphQL evaluates parseLiteral during document validation and parseValue during variable coercion before resolver authentication or authorization, so a small unauthenticated request can block the Node.js event loop and stall the server process. serialize is also affected when unvalidated stored values are returned through the scalar. This issue is fixed in version 2.0.1. |
| Use of externally-controlled format string in SQL Server allows an authorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known
The namespace head is marked zoned at allocation time based only on the
command set identifier. If the zone info query reports a zero zone size,
the path namespace is registered without zoned limits while the head
still advertises the zoned capability with a zone size of zero, and
reporting zones or writing to the head then shifts by ilog2(0).
Drop the zoned feature from the head allocation and let the head limits
refresh stack it in from the path namespace instead. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up. |
| Weak authentication in Network Device Enrollment Service (NDES) allows an authorized attacker to perform spoofing over a network. |
| IBM App Connect Enterprise 13.0.1.0 through 13.0.8.2 could allow a remote attacker to obtain sensitive information due to binding to an unrestricted IP address. |
| Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback. |
| Improper Neutralization of Special Elements Used in a Template Engine vulnerability in Drupal Webform allows Code Injection. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| A data-validation flaw exists in the BSON handling and binary serialization path of the MongoDB C# Driver. When an application constructs a raw or lazy BSON document object from externally supplied binary data, the driver does not verify that the size quantity declared inside that data matches the amount of data actually provided, and it copies the data onto the wire unchanged. An unauthenticated party who can supply binary content to such an application can thereby cause additional elements to be inserted into, or existing elements to be removed from, the database command the application issues, without needing any database credentials of their own. This can result in unauthorized modification of stored data and disclosure of data outside the intended scope of the application's request, bounded by the database privileges the application itself holds. |
