| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_iotlb: bound map allocation in add_range
vhost_iotlb_add_range_ctx() only retires an old entry when the table
has a non-zero limit, has exactly reached that limit and has
VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating
entries after reaching their configured limit.
Existing vhost devices allocate their IOTLB with max_iotlb_entries from
vhost.c, which defaults to 2048 and is tunable by module parameter. Use
the caller-provided limit at the allocation point instead of adding a
separate default in the common IOTLB helper, and reject non-positive
values in vhost paths that can report an error.
Other vhost IOTLB users should not create zero-limit tables when entries
can be populated from userspace or guest-controlled requests. Add
caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and
vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require
at least two entries for vdpa_sim and mlx5 vDPA paths that install
full-range mappings, since those mappings are split into two IOTLB
entries.
Handle full-range mappings in the common helper by checking that the
IOTLB can hold both split entries before inserting the first half. This
avoids returning an error after leaving a half mapping behind.
When the table is full, keep the existing retire behavior for retiring
tables and return -ENOSPC for non-retiring tables. Reuse the retired map
node instead of freeing it and allocating a replacement, so a stream of
IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table
has reached its limit. If a zero-limit IOTLB still reaches the common
helper, treat it as a configuration error and return -EINVAL.
I found this bug myself, though the patch was written with AI assistance. |
| A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix sk_buff leak when the header checks reject a packet
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: release template ct on non-IP path
A bridge nftables ct zone set rule can attach a conntrack template to
an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6
EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with
IP_CT_UNTRACKED without releasing the existing template reference.
That makes the per-cpu template, and any temporary templates allocated
for concurrent use, unreachable and leaks memory until the host runs out
of slab.
Reset the skb conntrack state before marking the frame untracked so the
existing template reference is dropped on the non-IP path. |
| Renovate versions from 31.51.0 before 40.33.0 contain a command injection vulnerability in the helmv3 manager where the repository parameter is appended to helm registry login commands without proper sanitization. Attackers with repository write access can craft malicious Chart.yaml files to execute arbitrary commands on the machine running Renovate. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. From 3.9.0 until 4.14.5 and 5.0.0-beta2, the Wazuh cluster protocol in framework/wazuh/core/cluster/common.py allows an authenticated cluster node to exhaust memory on the master. The receive_str() method accepts an attacker-controlled total for InBuffer without a maximum, so a new_str command can request a multi-gigabyte bytearray and repeated requests accumulate in in_str. The divided-message path also retains flag_divided fragments under unique counters in div_msg_box without a count, aggregate-size, or expiration limit. Exploitation can disrupt agent connectivity and alert processing across the monitored environment. This issue is fixed in versions 4.14.5 and 5.0.0-beta2. |
| Mistune is a Python Markdown parser with renderers and plugins. Versions 3.3.0 through 3.3.2 are vulnerable to DoS through deeply nested tokens. HTML rendering creates deeply nested emphasis tokens from consecutive asterisk characters, and recursive rendering in HTMLRenderer.render_token() can exceed Python's recursion limit and raise RecursionError, allowing crafted Markdown to crash a parsing process. This issue is fixed in version 3.3.3 |
| The HTTP media server on DJI drones does not enforce sufficient limits on incoming connections or request rates. An attacker with access to the drone's internal network can exhaust the server's connection pool by repeatedly requesting a stored media file, preventing the server from handling legitimate requests and causing a denial of service that prevents the DJI Fly application from retrieving photos and videos from the aircraft in QuickTransfer mode.
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. |
| A vulnerability was detected in sworddut mcp-ffmpeg-helper 0.1.0/0.1.1/0.2.1. This affects the function handleToolCall of the file src/tools/handlers.ts of the component Tool Handler. The manipulation of the argument format results in os command injection. Attacking locally is a requirement. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Vulnerability in the Oracle Purchasing product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Purchasing. Successful attacks of this vulnerability can result in takeover of Oracle Purchasing. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| A weakness has been identified in TRENDnet TEW-823DRU 1.1.02b01. This vulnerability affects the function nvram_get of the component CLI Configuration Tool. This manipulation causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
| A vulnerability was found in TanStack devtools-vite 0.7.0. Affected by this issue is the function installPackage of the file packages/devtools-bundler-core/src/package-manager.ts of the component Development Devtools Event Bus. The manipulation of the argument packageName results in os command injection. Attacking locally is a requirement. A high complexity level is associated with this attack. The exploitation is known to be difficult. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in FreeIPA. A low-privilege authenticated user can exploit this vulnerability by submitting an oversized One-Time Password (OTP) key value. This oversized key is then decoded and re-encoded without proper size limits, consuming excessive CPU and memory resources. This can lead to a denial of service, degrading the availability of the IPA service. |
| A security flaw has been discovered in Tenda CH22 1.0.0.1. The impacted element is the function formeditFileName of the file /goform/editFileName. The manipulation of the argument editNameMit results in command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| The O-RAN E2T I-Release Prometheus metric Increment function can crash in sctpThread.cpp for message.peerInfo->sctpParams->e2tCounters[IN_SUCC][MSG_COUNTER][ProcedureCode_id_RICsubscription]->Increment(). |
| A flaw was found in cri-o, where an arbitrary systemd property can be injected via a Pod annotation. Any user who can create a pod with an arbitrary annotation may perform an arbitrary action on the host system. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| The Forminator Forms WordPress plugin before 1.57.0.5 does not restrict a network-wide setting to network administrators, allowing an administrator of any single site on a multisite network to execute arbitrary code across the entire network. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
