| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix infinite loop in nilfs_mdt_get_block()
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
dccp: fix data-race around dp->dccps_mss_cache
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525099/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
loop: loop_set_status_from_info() check before assignment
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: zynq: Fix refcount leak in zynq_early_slcr_init
of_find_compatible_node() returns a node pointer with refcount incremented,
we should use of_node_put() on error path.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix decoder disable pm crash
Can't call pm_runtime_disable when the architecture support sub device for
'dev->pm.dev' is NUll, or will get below crash log.
[ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0
[ 10.771556] lr : __pm_runtime_disable+0x30/0x130
[ 10.771558] sp : ffffffc01e4cb800
[ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8
[ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0
[ 10.771567] x25: 0000000000000002 x24: 0000000000000002
[ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001
[ 10.771573] x21: 0000000000000001 x20: 0000000000000000
[ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18
[ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74
[ 10.771583] x15: 00000000000002ea x14: 0000000000000058
[ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4
[ 10.771590] x11: 0000000000000000 x10: 0000000000000001
[ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4
[ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000
[ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001
[ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001
[ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4
[ 10.771613] Call trace:
[ 10.771617] _raw_spin_lock_irq+0x4c/0xa0
[ 10.771620] __pm_runtime_disable+0x30/0x130
[ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc]
[ 10.771662] platform_drv_probe+0x9c/0xbc
[ 10.771665] really_probe+0x13c/0x3a0
[ 10.771668] driver_probe_device+0x84/0xc0
[ 10.771671] device_driver_attach+0x54/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Cap MSIX used to online CPUs + 1
The irdma driver can use a maximum number of msix vectors equal
to num_online_cpus() + 1 and the kernel warning stack below is shown
if that number is exceeded.
The kernel throws a warning as the driver tries to update the affinity
hint with a CPU mask greater than the max CPU IDs. Fix this by capping
the MSIX vectors to num_online_cpus() + 1.
WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
Call Trace:
irdma_rt_init_hw+0xa62/0x1290 [irdma]
? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma]
? __is_kernel_percpu_address+0x63/0x310
? rcu_read_lock_held_common+0xe/0xb0
? irdma_lan_unregister_qset+0x280/0x280 [irdma]
? irdma_request_reset+0x80/0x80 [irdma]
? ice_get_qos_params+0x84/0x390 [ice]
irdma_probe+0xa40/0xfc0 [irdma]
? rcu_read_lock_bh_held+0xd0/0xd0
? irdma_remove+0x140/0x140 [irdma]
? rcu_read_lock_sched_held+0x62/0xe0
? down_write+0x187/0x3d0
? auxiliary_match_id+0xf0/0x1a0
? irdma_remove+0x140/0x140 [irdma]
auxiliary_bus_probe+0xa6/0x100
__driver_probe_device+0x4a4/0xd50
? __device_attach_driver+0x2c0/0x2c0
driver_probe_device+0x4a/0x110
__driver_attach+0x1aa/0x350
bus_for_each_dev+0x11d/0x1b0
? subsys_dev_iter_init+0xe0/0xe0
bus_add_driver+0x3b1/0x610
driver_register+0x18e/0x410
? 0xffffffffc0b88000
irdma_init_module+0x50/0xaa [irdma]
do_one_initcall+0x103/0x5f0
? perf_trace_initcall_level+0x420/0x420
? do_init_module+0x4e/0x700
? __kasan_kmalloc+0x7d/0xa0
? kmem_cache_alloc_trace+0x188/0x2b0
? kasan_unpoison+0x21/0x50
do_init_module+0x1d1/0x700
load_module+0x3867/0x5260
? layout_and_allocate+0x3990/0x3990
? rcu_read_lock_held_common+0xe/0xb0
? rcu_read_lock_sched_held+0x62/0xe0
? rcu_read_lock_bh_held+0xd0/0xd0
? __vmalloc_node_range+0x46b/0x890
? lock_release+0x5c8/0xba0
? alloc_vm_area+0x120/0x120
? selinux_kernel_module_from_file+0x2a5/0x300
? __inode_security_revalidate+0xf0/0xf0
? __do_sys_init_module+0x1db/0x260
__do_sys_init_module+0x1db/0x260
? load_module+0x5260/0x5260
? do_syscall_64+0x22/0x450
do_syscall_64+0xa5/0x450
entry_SYSCALL_64_after_hwframe+0x66/0xdb |
| In the Linux kernel, the following vulnerability has been resolved:
perf tool x86: Fix perf_env memory leak
Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 21 byte(s) in 1 object(s) allocated from:
#0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
#2 0x556701d70589 in perf_env__cpuid util/env.c:465
#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
#5 0x556701d8f78b in evsel__config util/evsel.c:1366
#6 0x556701ef5872 in evlist__config util/record.c:108
#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
#8 0x556701cacd07 in run_test tests/builtin-test.c:236
#9 0x556701cacfac in test_and_print tests/builtin-test.c:265
#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
#14 0x556701d3be90 in run_argv tools/perf/perf.c:421
#15 0x556701d3c3f8 in main tools/perf/perf.c:537
#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
``` |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sprd: Release dma buffer to avoid memory leak
When attaching to a domain, the driver would alloc a DMA buffer which
is used to store address mapping table, and it need to be released
when the IOMMU domain is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix warning for holder mismatch from export_rdev()
Commit a1d767191096 ("md: use mddev->external to select holder in
export_rdev()") fix the problem that 'claim_rdev' is used for
blkdev_get_by_dev() while 'rdev' is used for blkdev_put().
However, if mddev->external is changed from 0 to 1, then 'rdev' is used
for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And
this problem can be reporduced reliably by following:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330
Modules linked in: multipath md_mod loop
CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50
RIP: 0010:blkdev_put+0x27c/0x330
Call Trace:
<TASK>
export_rdev.isra.23+0x50/0xa0 [md_mod]
mddev_unlock+0x19d/0x300 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix the problem by recording if 'rdev' is used as holder. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: fix access race during throttle policy activation
On repeated cold boots we occasionally hit a NULL pointer crash in
blk_should_throtl() when throttling is consulted before the throttle
policy is fully enabled for the queue. Checking only q->td != NULL is
insufficient during early initialization, so blkg_to_pd() for the
throttle policy can still return NULL and blkg_to_tg() becomes NULL,
which later gets dereferenced.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000156
...
pc : submit_bio_noacct+0x14c/0x4c8
lr : submit_bio_noacct+0x48/0x4c8
sp : ffff800087f0b690
x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0
x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff
x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c
x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60
x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002
x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500
x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a
Call trace:
submit_bio_noacct+0x14c/0x4c8
verity_map+0x178/0x2c8
__map_bio+0x228/0x250
dm_submit_bio+0x1c4/0x678
__submit_bio+0x170/0x230
submit_bio_noacct_nocheck+0x16c/0x388
submit_bio_noacct+0x16c/0x4c8
submit_bio+0xb4/0x210
f2fs_submit_read_bio+0x4c/0xf0
f2fs_mpage_readpages+0x3b0/0x5f0
f2fs_readahead+0x90/0xe8
Tighten blk_throtl_activated() to also require that the throttle policy
bit is set on the queue:
return q->td != NULL &&
test_bit(blkcg_policy_throtl.plid, q->blkcg_pols);
This prevents blk_should_throtl() from accessing throttle group state
until policy data has been attached to blkgs. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/test_kho: check if KHO is enabled
We must check whether KHO is enabled prior to issuing KHO commands,
otherwise KHO internal data structures are not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid migrating empty section
It reports a bug from device w/ zufs:
F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT
F2FS-fs (dm-64): Stopped filesystem due to reason: 4
Thread A Thread B
- f2fs_expand_inode_data
- f2fs_allocate_pinning_section
- f2fs_gc_range
- do_garbage_collect w/ segno #x
- writepage
- f2fs_allocate_data_block
- new_curseg
- allocate segno #x
The root cause is: fallocate on pinning file may race w/ block allocation
as above, result in do_garbage_collect() from fallocate() may migrate
segment which is just allocated by a log, the log will update segment type
in its in-memory structure, however GC will get segment type from on-disk
SSA block, once segment type changes by log, we can detect such
inconsistency, then shutdown filesystem.
In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE),
however segno #173822 was just allocated as data type segment, so in-memory
SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA).
Change as below to fix this issue:
- check whether current section is empty before gc
- add sanity checks on do_garbage_collect() to avoid any race case, result
in migrating segment used by log.
- btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix possible vport_config NULL pointer deref in remove
Attempting to remove the driver will cause a crash in cases where
the vport failed to initialize. Following trace is from an instance where
the driver failed during an attempt to create a VF:
[ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated
[ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms)
[ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028
...
[ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf]
...
[ 1723.364973] Call Trace:
[ 1723.365475] <TASK>
[ 1723.365972] pci_device_remove+0x42/0xb0
[ 1723.366481] device_release_driver_internal+0x1a9/0x210
[ 1723.366987] pci_stop_bus_device+0x6d/0x90
[ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20
[ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120
[ 1723.368309] sriov_disable+0x34/0xe0
[ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf]
[ 1723.368982] sriov_numvfs_store+0xda/0x1c0
Avoid the NULL pointer dereference by adding NULL pointer check for
vport_config[i], before freeing user_config.q_coalesce. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix KASAN global-out-of-bounds warning
When running "perf mem record" command on CWF, the below KASAN
global-out-of-bounds warning is seen.
==================================================================
BUG: KASAN: global-out-of-bounds in cmt_latency_data+0x176/0x1b0
Read of size 4 at addr ffffffffb721d000 by task dtlb/9850
Call Trace:
kasan_report+0xb8/0xf0
cmt_latency_data+0x176/0x1b0
setup_arch_pebs_sample_data+0xf49/0x2560
intel_pmu_drain_arch_pebs+0x577/0xb00
handle_pmi_common+0x6c4/0xc80
The issue is caused by below code in __grt_latency_data(). The code
tries to access x86_hybrid_pmu structure which doesn't exist on
non-hybrid platform like CWF.
WARN_ON_ONCE(hybrid_pmu(event->pmu)->pmu_type == hybrid_big)
So add is_hybrid() check before calling this WARN_ON_ONCE to fix the
global-out-of-bounds access issue. |
