| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix race between wbt_enable_default and IO submission
When wbt_enable_default() is moved out of queue freezing in elevator_change(),
it can cause the wbt inflight counter to become negative (-1), leading to hung
tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter
is in an inconsistent state.
The issue occurs because wbt_enable_default() could race with IO submission,
allowing the counter to be decremented before proper initialization. This manifests
as:
rq_wait[0]:
inflight: -1
has_waiters: True
rwb_enabled() checks the state, which can be updated exactly between wbt_wait()
(rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter
will become negative.
And results in hung task warnings like:
task:kworker/u24:39 state:D stack:0 pid:14767
Call Trace:
rq_qos_wait+0xb4/0x150
wbt_wait+0xa9/0x100
__rq_qos_throttle+0x24/0x40
blk_mq_submit_bio+0x672/0x7b0
...
Fix this by:
1. Splitting wbt_enable_default() into:
- __wbt_enable_default(): Returns true if wbt_init() should be called
- wbt_enable_default(): Wrapper for existing callers (no init)
- wbt_init_enable_default(): New function that checks and inits WBT
2. Using wbt_init_enable_default() in blk_register_queue() to ensure
proper initialization during queue registration
3. Move wbt_init() out of wbt_enable_default() which is only for enabling
disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the
original lock warning can be avoided.
4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling
code since it's no longer needed
This ensures WBT is properly initialized before any IO can be submitted,
preventing the counter from going negative. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: invalidate dentry cache on failed whiteout creation
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink() |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: set dummy blocksize to read boot_block when mounting
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling] |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: amlogic-a4: fix double free caused by devm
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the redundant clk_disable_unprepare() calls from the probe
error path and aml_rtc_remove(), allowing the devm framework to
automatically manage the clock lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replaced
When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn
instruction, discard the exception and retry the instruction if the code
stream is changed (e.g. by a different vCPU) between when the CPU
executes the instruction and when KVM decodes the instruction to get the
next RIP.
As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-inject
INT3/INTO instead of retrying the instruction"), failure to verify that
the correct INTn instruction was decoded can effectively clobber guest
state due to decoding the wrong instruction and thus specifying the
wrong next RIP.
The bug most often manifests as "Oops: int3" panics on static branch
checks in Linux guests. Enabling or disabling a static branch in Linux
uses the kernel's "text poke" code patching mechanism. To modify code
while other CPUs may be executing that code, Linux (temporarily)
replaces the first byte of the original instruction with an int3 (opcode
0xcc), then patches in the new code stream except for the first byte,
and finally replaces the int3 with the first byte of the new code
stream. If a CPU hits the int3, i.e. executes the code while it's being
modified, then the guest kernel must look up the RIP to determine how to
handle the #BP, e.g. by emulating the new instruction. If the RIP is
incorrect, then this lookup fails and the guest kernel panics.
The bug reproduces almost instantly by hacking the guest kernel to
repeatedly check a static branch[1] while running a drgn script[2] on
the host to constantly swap out the memory containing the guest's TSS.
[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a
[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b |
| In the Linux kernel, the following vulnerability has been resolved:
misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic
The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.
A panic was reported on arm64:
[ 60.137988] ------------[ cut here ]------------
[ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[ 60.213149] lr : swiotlb_map+0x88/0x1f0
[ 60.216982] sp : ffff80000a883bc0
[ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[ 60.291658] Call trace:
[ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590
[ 60.298629] swiotlb_map+0x88/0x1f0
[ 60.302115] dma_map_page_attrs+0x188/0x230
[ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[ 60.312660] __arm64_sys_ioctl+0xa8/0xf0
[ 60.316583] invoke_syscall+0x44/0x108
[ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0
[ 60.325038] do_el0_svc+0x2c/0xb8
[ 60.328351] el0_svc+0x2c/0x88
[ 60.331406] el0t_64_sync_handler+0xb8/0xc0
[ 60.335587] el0t_64_sync+0x18c/0x190
[ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[ 60.345344] ---[ end trace 0000000000000000 ]---
To fix it, this patch adds a checking the payload length if it is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race condition in kprobe initialization causing NULL pointer dereference
There is a critical race condition in kprobe initialization that can lead to
NULL pointer dereference and kernel crash.
[1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000
...
[1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO)
[1135630.269239] pc : kprobe_perf_func+0x30/0x260
[1135630.277643] lr : kprobe_dispatcher+0x44/0x60
[1135630.286041] sp : ffffaeff4977fa40
[1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400
[1135630.302837] x27: 0000000000000000 x26: 0000000000000000
[1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528
[1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50
[1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50
[1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000
[1135630.349985] x17: 0000000000000000 x16: 0000000000000000
[1135630.359285] x15: 0000000000000000 x14: 0000000000000000
[1135630.368445] x13: 0000000000000000 x12: 0000000000000000
[1135630.377473] x11: 0000000000000000 x10: 0000000000000000
[1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000
[1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000
[1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000
[1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006
[1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000
[1135630.429410] Call trace:
[1135630.434828] kprobe_perf_func+0x30/0x260
[1135630.441661] kprobe_dispatcher+0x44/0x60
[1135630.448396] aggr_pre_handler+0x70/0xc8
[1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0
[1135630.462435] brk_handler+0xbc/0xd8
[1135630.468437] do_debug_exception+0x84/0x138
[1135630.475074] el1_dbg+0x18/0x8c
[1135630.480582] security_file_permission+0x0/0xd0
[1135630.487426] vfs_write+0x70/0x1c0
[1135630.493059] ksys_write+0x5c/0xc8
[1135630.498638] __arm64_sys_write+0x24/0x30
[1135630.504821] el0_svc_common+0x78/0x130
[1135630.510838] el0_svc_handler+0x38/0x78
[1135630.516834] el0_svc+0x8/0x1b0
kernel/trace/trace_kprobe.c: 1308
0xffff3df8995039ec <kprobe_perf_func+0x2c>: ldr x21, [x24,#120]
include/linux/compiler.h: 294
0xffff3df8995039f0 <kprobe_perf_func+0x30>: ldr x1, [x21,x0]
kernel/trace/trace_kprobe.c
1308: head = this_cpu_ptr(call->perf_events);
1309: if (hlist_empty(head))
1310: return 0;
crash> struct trace_event_call -o
struct trace_event_call {
...
[120] struct hlist_head *perf_events; //(call->perf_event)
...
}
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read an
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: starfive - Correctly handle return of sg_nents_for_len
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then
it results in an out of bounds access.
The code checks for invalid values, but doesn't set the error code. Return
-EINVAL in that case, instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/pageattr: Propagate return value from __change_memory_common
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7ec3
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix NULL pointer deference when splitting folio
Commit c010d47f107f ("mm: thp: split huge page to any lower order pages")
introduced an early check on the folio's order via mapping->flags before
proceeding with the split work.
This check introduced a bug: for shmem folios in the swap cache and
truncated folios, the mapping pointer can be NULL. Accessing
mapping->flags in this state leads directly to a NULL pointer dereference.
This commit fixes the issue by moving the check for mapping != NULL before
any attempt to access mapping->flags. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
[phasta: commit message nits] |
| In the Linux kernel, the following vulnerability has been resolved:
driver: soc: xilinx: use _safe loop iterator to avoid a use after free
The hash_for_each_possible() loop dereferences "eve_data" to get the
next item on the list. However the loop frees eve_data so it leads to
a use after free. Use hash_for_each_possible_safe() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring()
In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA
allocations in a loop. When an allocation fails, the previously
successful allocations are not freed on exit.
Fix that by jumping to err_free_rings label on error, which calls
rtl8180_free_rx_ring() to free the allocations. Remove the free of
rx_ring in rtl8180_init_rx_ring() error path, and set the freed
priv->rx_buf entry to null, to avoid double free. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: c6xdigio: Fix invalid PNP driver unregistration
The Comedi low-level driver "c6xdigio" seems to be for a parallel port
connected device. When the Comedi core calls the driver's Comedi
"attach" handler `c6xdigio_attach()` to configure a Comedi to use this
driver, it tries to enable the parallel port PNP resources by
registering a PNP driver with `pnp_register_driver()`, but ignores the
return value. (The `struct pnp_driver` it uses has only the `name` and
`id_table` members filled in.) The driver's Comedi "detach" handler
`c6xdigio_detach()` unconditionally unregisters the PNP driver with
`pnp_unregister_driver()`.
It is possible for `c6xdigio_attach()` to return an error before it
calls `pnp_register_driver()` and it is possible for the call to
`pnp_register_driver()` to return an error (that is ignored). In both
cases, the driver should not be calling `pnp_unregister_driver()` as it
does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be
called by the Comedi core if `c6xdigio_attach()` returns an error, or if
the Comedi core decides to detach the Comedi device from the driver for
some other reason.)
The unconditional call to `pnp_unregister_driver()` without a previous
successful call to `pnp_register_driver()` will cause
`driver_unregister()` to issue a warning "Unexpected driver
unregister!". This was detected by Syzbot [1].
Also, the PNP driver registration and unregistration should be done at
module init and exit time, respectively, not when attaching or detaching
Comedi devices to the driver. (There might be more than one Comedi
device being attached to the driver, although that is unlikely.)
Change the driver to do the PNP driver registration at module init time,
and the unregistration at module exit time. Since `c6xdigio_detach()`
now only calls `comedi_legacy_detach()`, remove the function and change
the Comedi driver "detach" handler to `comedi_legacy_detach`.
-------------------------------------------
[1] Syzbot sample crash report:
Unexpected driver unregister!
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline]
WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Modules linked in:
CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline]
RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270
Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41
RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8
RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660
R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000
FS: 000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0
Call Trace:
<TASK>
comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207
comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215
comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011
do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872
comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_sys
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock
blk_mq_{add,del}_queue_tag_set() functions add and remove queues from
tagset, the functions make sure that tagset and queues are marked as
shared when two or more queues are attached to the same tagset.
Initially a tagset starts as unshared and when the number of added
queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along
with all the queues attached to it. When the number of attached queues
drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and
the remaining queues as unshared.
Both functions need to freeze current queues in tagset before setting on
unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions
hold set->tag_list_lock mutex, which makes sense as we do not want
queues to be added or deleted in the process. This used to work fine
until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset")
made the nvme driver quiesce tagset instead of quiscing individual
queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in
set->tag_list while holding set->tag_list_lock also.
This results in deadlock between two threads with these stacktraces:
__schedule+0x47c/0xbb0
? timerqueue_add+0x66/0xb0
schedule+0x1c/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.constprop.0+0x271/0x600
blk_mq_quiesce_tagset+0x25/0xc0
nvme_dev_disable+0x9c/0x250
nvme_timeout+0x1fc/0x520
blk_mq_handle_expired+0x5c/0x90
bt_iter+0x7e/0x90
blk_mq_queue_tag_busy_iter+0x27e/0x550
? __blk_mq_complete_request_remote+0x10/0x10
? __blk_mq_complete_request_remote+0x10/0x10
? __call_rcu_common.constprop.0+0x1c0/0x210
blk_mq_timeout_work+0x12d/0x170
process_one_work+0x12e/0x2d0
worker_thread+0x288/0x3a0
? rescuer_thread+0x480/0x480
kthread+0xb8/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
__schedule+0x47c/0xbb0
? xas_find+0x161/0x1a0
schedule+0x1c/0xa0
blk_mq_freeze_queue_wait+0x3d/0x70
? destroy_sched_domains_rcu+0x30/0x30
blk_mq_update_tag_set_shared+0x44/0x80
blk_mq_exit_queue+0x141/0x150
del_gendisk+0x25a/0x2d0
nvme_ns_remove+0xc9/0x170
nvme_remove_namespaces+0xc7/0x100
nvme_remove+0x62/0x150
pci_device_remove+0x23/0x60
device_release_driver_internal+0x159/0x200
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x112/0x1e0
vfs_write+0x2b1/0x3d0
ksys_write+0x4e/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The top stacktrace is showing nvme_timeout() called to handle nvme
command timeout. timeout handler is trying to disable the controller and
as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not
to call queue callback handlers. The thread is stuck waiting for
set->tag_list_lock as it tries to walk the queues in set->tag_list.
The lock is held by the second thread in the bottom stack which is
waiting for one of queues to be frozen. The queue usage counter will
drop to zero after nvme_timeout() finishes, and this will not happen
because the thread will wait for this mutex forever.
Given that [un]quiescing queue is an operation that does not need to
sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking
set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU
safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list)
in blk_mq_del_queue_tag_set() because we can not re-initialize it while
the list is being traversed under RCU. The deleted queue will not be
added/deleted to/from a tagset and it will be freed in blk_free_queue()
after the end of RCU grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free special fields when update [lru_,]percpu_hash maps
As [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missing
calls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause the
memory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until the
map gets freed.
Fix this by calling 'bpf_obj_free_fields()' after
'copy_map_value[,_long]()' in 'pcpu_copy_value()'. |
| In the Linux kernel, the following vulnerability has been resolved:
media: anysee: fix null-ptr-deref in anysee_master_xfer
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
[hverkuil: add spaces around +] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vgem-fence: Fix potential deadlock on release
A timer that expires a vgem fence automatically in 10 seconds is now
released with timer_delete_sync() from fence->ops.release() called on last
dma_fence_put(). In some scenarios, it can run in IRQ context, which is
not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was
demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while
working on new IGT subtests syncobj_timeline@stress-* as user space
replacements of some problematic test cases of a dma-fence-chain selftest
[1].
[117.004338] ================================
[117.004340] WARNING: inconsistent lock state
[117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U
[117.004346] --------------------------------
[117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes:
[117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190
[117.004361] {HARDIRQ-ON-W} state was registered at:
[117.004363] lock_acquire+0xc4/0x2e0
[117.004366] call_timer_fn+0x80/0x2a0
[117.004368] __run_timers+0x231/0x310
[117.004370] run_timer_softirq+0x76/0xe0
[117.004372] handle_softirqs+0xd4/0x4d0
[117.004375] __irq_exit_rcu+0x13f/0x160
[117.004377] irq_exit_rcu+0xe/0x20
[117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0
[117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20
[117.004385] cpuidle_enter_state+0x12b/0x8a0
[117.004388] cpuidle_enter+0x2e/0x50
[117.004393] call_cpuidle+0x22/0x60
[117.004395] do_idle+0x1fd/0x260
[117.004398] cpu_startup_entry+0x29/0x30
[117.004401] start_secondary+0x12d/0x160
[117.004404] common_startup_64+0x13e/0x141
[117.004407] irq event stamp: 2282669
[117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80
[117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0
[117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18
[117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160
[117.004426]
other info that might help us debug this:
[117.004429] Possible unsafe locking scenario:
[117.004432] CPU0
[117.004433] ----
[117.004434] lock((&fence->timer));
[117.004436] <Interrupt>
[117.004438] lock((&fence->timer));
[117.004440]
*** DEADLOCK ***
[117.004443] 1 lock held by swapper/0/0:
[117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0
[117.004450]
stack backtrace:
[117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary)
[117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
[117.004456] Call Trace:
[117.004456] <IRQ>
[117.004457] dump_stack_lvl+0x91/0xf0
[117.004460] dump_stack+0x10/0x20
[117.004461] print_usage_bug.part.0+0x260/0x360
[117.004463] mark_lock+0x76e/0x9c0
[117.004465] ? register_lock_class+0x48/0x4a0
[117.004467] __lock_acquire+0xbc3/0x2860
[117.004469] lock_acquire+0xc4/0x2e0
[117.004470] ? __timer_delete_sync+0x4b/0x190
[117.004472] ? __timer_delete_sync+0x4b/0x190
[117.004473] __timer_delete_sync+0x68/0x190
[117.004474] ? __timer_delete_sync+0x4b/0x190
[117.004475] timer_delete_sync+0x10/0x20
[117.004476] vgem_fence_release+0x19/0x30 [vgem]
[117.004478] dma_fence_release+0xc1/0x3b0
[117.004480] ? dma_fence_release+0xa1/0x3b0
[117.004481] dma_fence_chain_release+0xe7/0x130
[117.004483] dma_fence_release+0xc1/0x3b0
[117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80
[117.004485] dma_fence_chain_irq_work+0x59/0x80
[117.004487] irq_work_single+0x75/0xa0
[117.004490] irq_work_r
---truncated--- |
