| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free race in fastrpc_map_create
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix mm lifecycle in open-coded task_vma iterator
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: fix missing locks in invalidating cache blocks
In passthrough mode, the policy invalidate_mapping operation is called
simultaneously from multiple workers, thus it should be protected by a
lock. Otherwise, we might end up with data races on the allocated blocks
counter, or even use-after-free issues with internal data structures
when doing concurrent writes.
Note that the existing FIXME in smq_invalidate_mapping() doesn't affect
passthrough mode since migration tasks don't exist there, but would need
attention if supporting fast device shrinking via suspend/resume without
target reloading.
Reproduce steps:
1. Create a cache device consisting of 1024 cache entries
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Populate the cache, and record the number of cached blocks
fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \
--size=64m --direct=1
nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the passthrough cache. By setting multiple jobs with I/O
size equal to the cache block size, cache blocks are invalidated
concurrently from different workers.
fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \
--direct=1 --numjobs=2 --randrepeat=0 --size=64m
5. Check if demoted matches cached block count. These numbers should
match but may differ due to the data race.
nr_demoted=$(dmsetup status cache | awk '{print $12}')
echo "$nr_cached, $nr_demoted" |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: add some missing log locking
Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(),
gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,
but these functions require exclusion against concurrent transactions.
To fix that, add a non-locking __gfs2_log_flush() function. Then, in
gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log
flushing functions and __gfs2_log_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Take state lock for af_unix iter
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF
More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.
[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
um: Fix potential race condition in TLB sync
During the TLB sync, we need to traverse and modify the page table,
so we should hold the page table lock. Since full SMP support for
threads within the same process is still missing, let's disable the
split page table lock for simplicity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: handle empty bo and UAF races
There look to be some nasty races here when triggering the
invalidate_mappings hook:
1) We do xe_bo_alloc() followed by the attach, before the actual full bo
init step in xe_dma_buf_init_obj(). However the bo is visible on the
attachments list after the attach. This is bad since exporter driver,
say amdgpu, can at any time call back into our invalidate_mappings hook,
with an empty/bogus bo, leading to potential bugs/crashes.
2) Similar to 1) but here we get a UAF, when the invalidate_mappings
hook is triggered. For example, we get as far as xe_bo_init_locked()
but this fails in some way. But here the bo will be freed on error, but
we still have it attached from dma-buf pov, so if the
invalidate_mappings is now triggered then the bo we access is gone and
we trigger UAF and more bugs/crashes.
To fix this, move the attach step until after we actually have a fully
set up buffer object. Note that the bo is not published to userspace
until later, so not sure what the comment "Don't publish the bo
until we have a valid attachment", is referring to.
We have at least two different customers reporting hitting a NULL ptr
deref in evict_flags when importing something from amdgpu, followed by
triggering the evict flow. Hit rate is also pretty low, which would
hint at some kind of race, so something like 1) or 2) might explain
this.
v2:
- Shuffle the order of the ops slightly (no functional change)
- Improve the comment to better explain the ordering (Matt B)
(cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
refcount_t: saturated; leaking memory.
WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0
Modules linked in: qrtr(+) bochs drm_shmem_helper ...
Call Trace:
<TASK>
qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr]
__qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr]
qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr]
kernel_bind+0xe4/0x120 net/socket.c:3592
qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr]
qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr]
do_one_initcall+0xf5/0x5e0 init/main.c:1283
...
</TASK>
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put(). |
