| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: validate assoc response length before subtracting header
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: make release_scratchbuffers idempotent
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the end of the buffer. Also require at least 4 bytes of
payload before comparing the WPS OUI. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Protect UUID list traversal
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: set have_execfd only once the interpreter is opened
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequently, begin_new_exec() dereferences the missing executable:
would_dump(bprm, bprm->executable);
and NULL derefs. Had it not, the hand-off later in the same function
would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL
file with -ENOMEM. Both sites are past the point of no return so the
exec cannot be unwound either way.
This can be reached by unprivileged users as binfmt_misc can be mounted
in user namespaces. So a user can register an 'O' entry whose
interpreter lives on a FUSE mount, have the FUSE server fail the open
with -ENOEXEC and execute a native ELF file that matches the entry.
have_execfd only means anything alongside the executable it describes
which is not set until the interpreter has been opened and staged.
So lets raise it there, next to execfd_creds, which is already set at
that point. An open failure now leaves it clear, so the fallback format
derives credentials from the binary and emits no AT_EXECFD, as it would
for any native exec. The argv rewrite load_misc_binary() performs before
the open is still not undone. This means the binary sees the interpreter
path in argv[0] and its own path in argv[1] but that predates this
change and only became observable once the exec stopped faulting. |
| In the Linux kernel, the following vulnerability has been resolved:
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
mmc_ioctl_cdrom_volume() first reads the audio control mode page into a
32-byte stack buffer with cgc->buflen set to 24. If the device reports a
block descriptor, the function increases cgc->buflen to include that
descriptor and reads the page again.
For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list
by moving cgc->buffer forward by offset - 8 bytes. This drops the block
descriptor from the outgoing payload and leaves a new 8-byte mode
parameter header in front of the audio control page. However, cgc->buflen
is left unchanged.
With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8
but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low
level packet path to write 32 bytes from that adjusted pointer, reading 8
bytes past the end of the 32-byte stack buffer.
This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on
drives that return a non-zero block descriptor length, which helps explain
why it has gone unnoticed. The overread is also sent to the device as
extra MODE SELECT payload, so it may not produce an obvious local failure.
Reduce cgc->buflen by the same amount as the buffer pointer adjustment so
the MODE SELECT transfer covers only the intended parameter list. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error
path. Switch pmem allocation from devm_kzalloc() to kzalloc() with
explicit kfree() in the free path to match its list-managed lifetime.
Remove the erroneous list_del(&svc_data_mem) which corrupted the list head
on failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_parport: deal with premature interrupt
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. The driver uses a user-supplied I/O port base address which Syzbot
would have supplied, but it might not be backed by real parallel port
hardware.
Change the initialization order in the driver's comedi "attach" handler
(`parport_attach()`) so that the hardware registers are initialized
before the interrupt handler is requested. This should prevent
premature interrupts occurring for real hardware.
Also add a test to the interrupt handler to ensure the comedi device is
fully attached and return early if it isn't. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix MSC output device reference leak
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234da ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate ranges in damon_set_regions()
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
ceph_handle_caps() reads snap_trace_len from the wire-format
ceph_mds_caps header and uses it unconditionally to build a fake
end pointer (snaptrace + snaptrace_len) that is later handed to
ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case:
snaptrace = h + 1;
snaptrace_len = le32_to_cpu(h->snap_trace_len);
p = snaptrace + snaptrace_len;
...
case CEPH_CAP_OP_IMPORT:
if (snaptrace_len) {
...
if (ceph_update_snap_trace(mdsc, snaptrace,
snaptrace + snaptrace_len,
false, &realm)) { ... }
ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm
from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad)
with the attacker-supplied fake end e == snaptrace + snaptrace_len.
With snaptrace_len == 0xFFFFFFFF the bound check is trivially
satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past
the legitimate msg->front buffer, and ri->num_snaps /
ri->num_prior_parent_snaps then drive further out-of-bounds
reads of the encoded snap arrays.
The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks
above the op switch each catch this OOB through their
ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit
behind a hdr.version-gated if, so a malicious or compromised
MDS that sets msg->hdr.version = 1 reaches the IMPORT path with
no version-gated decoder having validated snap_trace_len. The
shape has been present since ceph_handle_caps() was introduced.
Validate snap_trace_len against the message front buffer before
consuming it, using the canonical ceph_decode_need() / ceph_has_room()
helper. The helper bounds the length with subtraction (n <= end - p,
guarded by end >= p) rather than pointer addition, so it is wrap-safe
for the attacker-controlled u32 length on 32-bit builds where
p + snap_trace_len could overflow the address space. This matches the
rest of the ceph decode path (e.g. the pool_ns_len check a few lines
below), and the existing goto bad cleanup already covers this exit
path. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
[ idryomov: rename new_state_len -> new_state_item_size, formatting ] |
