| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In libexpat before 2.8.1, the computational complexity of attribute name collision checks allows a denial of service via moderately sized crafted XML input. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3. |
| Checkmate is an open-source, self-hosted tool designed to track and monitor server hardware, uptime, response times, and incidents in real-time with beautiful visualizations. Prior to 3.9.1, the public POST /api/v1/auth/register route in server/src/api/routes/authRoutes.ts passes multipart profileImage uploads through in-memory Multer parsing before registration validation, without file-size, file-count, or MIME-type limits in server/src/api/middleware/upload.ts. An unauthenticated attacker can submit concurrent oversized files that are buffered before invalid registration or invite-token checks reject the request, exhausting memory and crashing or destabilizing the backend. This issue is fixed in version 3.9.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Tear down DMA paths before stopping the rings
tbnet_tear_down() stops both rings and frees their frame buffers before
calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's
descriptor base and tbnet_free_buffers() unmaps and frees the pages the
frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's
'pending' bit, anything still in flight has nowhere to drain to.
The teardown sequence has been in this order since the driver was added.
The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable
DMA paths only after rings are enabled") moved the path enable to the end
of tbnet_connected_work() and documented why:
/* Both logins successful so enable the rings, high-speed DMA
* paths and start the network device queue.
*
* Note we enable the DMA paths last to make sure we have primed
* the Rx ring before any incoming packets are allowed to
* arrive.
*/
Teardown was never updated to match, so the rings and the paths now come
down in the same order they go up instead of in reverse.
On an ASMedia ASM4242 host router the 'pending' bit then never clears:
every teardown burns the full 500 ms timeout and
__tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to
5 s does not help, so the hop is not slow to drain, it never drains
at all.
The failure is invisible above the thunderbolt core.
__tb_path_deactivate_hops() is void and only calls tb_port_warn();
tb_path_deactivate(), tb_tunnel_deactivate() and
__tb_disconnect_xdomain_paths() are void as well, and
tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So
tb_xdomain_disable_paths() reports success and the netdev_warn() below
it never fires. Repeated teardowns eventually take the XDomain control
channel down, after which the peer node is gone and only a power cycle
brings the controller back.
Deactivating the paths first fixes it. Measured with kretprobes on a
stock v6.17 tree with no other patches applied, on a link that was up
and had just carried traffic:
before: __tb_path_deactivate_hop() returns 0 for the first hop, then
-ETIMEDOUT for the second 500335 us later
after: 0 for both, 525 us apart
Alternating the two orderings ABBA over three load levels, four
teardowns per arm: every teardown failed before the change (21 of 21
that ran), none failed after (0 of 24). The before arms ran short
because the link died partway through. The same split shows up when
the interface is enslaved to a bond instead of just brought down, which
is how I ran into this in the first place. Throughput and latency after
the change are unchanged.
Hosts whose routers drain the hop despite the stale descriptor base see
no functional difference, since the paths end up deactivated either way. |
| A memory leak flaw was found in cockpit-ws. The login page handler leaks a heap allocation on every unauthenticated request that carries a CockpitLang cookie, allowing a remote unauthenticated attacker to exhaust memory on the host and cause a denial of service. |
| A vulnerability has been found in BusyBox up to 1.30.1. This vulnerability affects unknown code of the file networking/wget.c of the component FEATURE_WGET_TIMEOUT Handler. Such manipulation of the argument -T leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is 83a40bf7a93c8ac093d33ab452222dd5b9eb57ff. A patch should be applied to remediate this issue. |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.14. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 6.0 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:N/I:N/A:H). |
| Grav is a file-based Web platform. Prior to 2.0.1, Grav ZipArchiver::extract() in system/src/Grav/Common/Filesystem/ZipArchiver.php passes archives to ZipArchive::extractTo() without enforcing the system.gpm.archive uncompressed-size, file-count, or nesting-depth limits. Code using Archiver::create('zip') to extract an attacker-controlled archive can exhaust disk space or inodes and make the site unavailable. This issue is fixed in version 2.0.1. |
| Vulnerability in the MySQL Connectors product of Oracle MySQL (component: Connector/ODBC). The supported version that is affected is 26.7.0. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where MySQL Connectors executes to compromise MySQL Connectors. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Connectors. CVSS 3.1 Base Score 5.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H). |
| RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources.
For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts.
In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application.
The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header. |
| RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, the public parser entrypoint `ratex_parser::parse(&str)` panics on the 9-byte input `\verbéxé` (i.e. `\verb` followed by the non-ASCII delimiter `é`). When handling a `\verb` command, the parser slices the verbatim argument with byte indices (`arg[1..arg.len() - 1]`); if the delimiter character is multibyte UTF-8, index `1` lands inside that character and Rust panics with *“byte index 1 is not a char boundary”*. Because RaTeX’s release profile sets `panic = "abort"` (`Cargo.toml:48`), the panic aborts the entire process — not just the current request/thread — making this a hard denial of service for any service that renders untrusted LaTeX. Version 0.1.11 fixes the issue. |
| WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API and influence responses from a Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise could cause the connector to retry failed event batches until event delivery stops. The vulnerability is possible because HTTP Event Collector delivery retry handling uses an unbounded default for failed batches instead of a finite retry limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure timestamp extraction with a crafted regular expression and matching event data to block a Kafka Connect worker thread, stopping event delivery for the affected connector. The vulnerability is possible because timestamp extraction evaluates customer-supplied regular expressions without a time limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka) and Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka) in the Splunk documentation. |
| A vulnerability was determined in ggml-org llama.cpp bec4772f6. This affects the function rpc_server::graph_compute of the file ggml/src/ggml-rpc/ggml-rpc.cpp of the component ggml-RPC Server. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The pull request to fix this issue awaits acceptance. |
| justhtml before 1.18.0 contains multiple low-severity denial-of-service issues in CSS selector handling and linkification. Applications that evaluate attacker-controlled selector strings (via query(), matches(), or selector-based transforms), run selector matching over very large untrusted documents, construct DOM trees from untrusted structure, or enable linkification over attacker-controlled text may consume disproportionate CPU or memory. Triggers include oversized selectors, large selector lists, oversized compound selectors, long combinator chains, deeply nested functional pseudo-classes, repeated token/positional matching, cyclic DOM graphs causing non-terminating traversal, and punctuation-heavy or trailing-bracket linkification input. These are availability-only concerns and do not by themselves allow script execution, data disclosure, or sanitizer bypass. Default JustHTML(sanitize=True) usage is not expected to be exposed, since selectors are normally supplied by application code. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled recursion. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to uncontrolled resource consumption. |
| Vulnerability in the Oracle Commerce Guided Search / Oracle Commerce Experience Manager product of Oracle Commerce (component: Experience Manager). The supported version that is affected is 11.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Commerce Guided Search / Oracle Commerce Experience Manager. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Commerce Guided Search / Oracle Commerce Experience Manager accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Commerce Guided Search / Oracle Commerce Experience Manager. CVSS 3.1 Base Score 9.1 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H). |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to unbounded recursion. |
