Export limit exceeded: 385178 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1020 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53796 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 6.3 Medium |
| rsync before 3.5.0 contains a time-of-check to time-of-use (TOCTOU) race condition vulnerability in the non-daemon receiver's destination directory handling that allows an attacker who can manipulate destination path parent components to redirect file writes to unintended locations. Attackers can substitute a symlink for a component of the destination path between the path resolution and chdir() call, causing the receiver's working directory to be established outside the intended destination tree so that subsequent relative-path file writes land in unintended filesystem locations. | ||||
| CVE-2026-43632 | 2 Ggml, Ggml-org | 2 Llama.cpp, Llama.cpp | 2026-08-14 | 8.1 High |
| llama.cpp builds b7492 through the latest b9060 contains a use-after-free vulnerability in llama-server affecting six tokenization endpoints (/tokenize, /detokenize, /infill, /apply-template, /rerank, and /anthropic/count_tokens) that bypass the task queue and access ctx_server.vocab directly on HTTP worker threads. Attackers can exploit a time-of-check-time-of-use race condition where the main thread destroys and frees vocab after the synchronization lock is released but before the handler finishes using it, causing a crash or potential code execution when --sleep-idle-seconds is configured. | ||||
| CVE-2026-16967 | 1 Ibm | 1 I | 2026-08-14 | 8.5 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain unauthorized access to system objects due to a time-of-check to time-of-use (TOCTOU) race condition involving symbolic links. | ||||
| CVE-2026-62728 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-08-14 | 7 High |
| Time-of-check time-of-use (toctou) race condition in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-68330 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern. | ||||
| CVE-2026-68404 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev. | ||||
| CVE-2026-68384 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) | ||||
| CVE-2026-68329 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queued commands have completed" contract in a multi-CPU scenario: CPU2: queue inv-B => need_sync = true CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N) CPU2: read need_sync == false => return 0 (no wait!) CPU2 returns without waiting for any sequence number even though its inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not been signaled). CPU2 then proceeds to, for example, free page-table pages while the IOMMU can still walk stale translations, opening a use-after-free window. This is a logical race in the meaning of the flag, not a memory-visibility issue, so barriers alone do not help. Fix it without losing the optimization of avoiding redundant CWAIT commands: take iommu->lock before testing need_sync, and when it is false do not return early but wait for the last allocated sequence number (cmd_sem_val). Since need_sync == false implies no sync command was queued after the last CWAIT, that CWAIT is FIFO-ordered after every not-yet-completed command, so waiting for its sequence number guarantees all prior commands (possibly queued by another CPU) have completed. The common path with pending work is unchanged and no extra hardware command is issued. | ||||
| CVE-2026-68228 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Move src_buf Removal to finish_encode During encoder processing, there is a case where the IRQ response could return the buffer back to userspace via v4l2_m2m_buf_done call. In this time, userspace could queue up this same buffer before start_encode removes the index from the ready queue. This would then lead to a case where the buffer in the ready queue could be a self loop due to the WRITE_ONCE(prev->next, new) call in __list_add. When __list_del is finally called, the loop is already made so nothing points back to ready queue list head and pointers are poisoned. A buffer should not be marked as DONE before the buffer is removed from m2m ready queue. Move removal entirely to finish_encode. | ||||
| CVE-2026-68173 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: wait on ublk_dev_ready() instead of ub->completion ub->completion is only re-armed by a successful START_USER_RECOVERY. If the ublk server sends END_USER_RECOVERY without one - e.g. its START failed with -EBUSY and the error was ignored - the wait is satisfied by the stale completion of the previous recovery cycle, and the device is marked LIVE and the requeue list kicked while the FETCH stream is still running and ubq->canceling is still set. The kick redispatches a previously requeued request, __ublk_queue_rq_common() sees ->canceling and parks it again via __ublk_abort_rq(), and after the last FETCH clears ->canceling nothing ever kicks the requeue list again: the request is stranded there while holding its tag. If it is the flush machinery's flush_rq, every subsequent fsync piles up in uninterruptible sleep and teardown hangs on tag draining. This matches a report of a lost PREFLUSH with ext4 on top of ublk after daemon crash recovery. ub->completion is an edge-triggered latch used as a proxy for the level condition "every queue has fetched all I/O commands", which can regress (F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop it and wait on the real condition instead: the new helper ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then re-checks it under ub->mutex, waiting again on regression, and returns with the mutex held and readiness guaranteed. Readiness becomes true in the same ub->mutex critical section that clears the last queue's ->canceling, so END_USER_RECOVERY marks the device LIVE and kicks the requeue list strictly after ->canceling clears. The wait stays interruptible, so a server whose daemon died can still be signalled out. For ublk_ctrl_start_dev() this replaces the fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting until the device is ready again. | ||||
| CVE-2026-68107 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) | ||||
| CVE-2026-68103 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue, the user space provides a doorbell BO handle and an offset within the bo to obtain a doorbell. However current implementation using xa_store_irq() to store a doorbell, which allows a later queue created with the same BO and offset parameters to overwrite an existing queue and doorbell mapping. This can cause problems like misrouting fence IRQ processing to a wrong queue, and mislead the cleanup process of one queue erasing the mapping of another queue. This commit fixes this issue by replacing xa_store_irq with xa_insert_irq, which rejects mapping a reserved doorbell to a newly created queue (cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) | ||||
| CVE-2026-73557 | 1 Vllm-project | 1 Vllm | 2026-08-13 | 5.3 Medium |
| vLLM is an inference and serving engine for large language models. From 0.20.2rc0 until 0.26.0, safe_load_prompt_embeds in vllm/renderers/embed_utils.py uses torch.sparse.check_sparse_tensor_invariants, whose process-global save, enable, and restore state can be raced by concurrent prompt_embeds parts submitted to POST /v1/chat/completions through AsyncMultiModalItemTracker.resolve_items, asyncio.gather, and the default executor, allowing an invalid sparse tensor to reach tensor.to_dense despite the CVE-2025-62164 guard when enable_prompt_embeds is enabled. This issue is fixed in version 0.26.0. | ||||
| CVE-2026-64279 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name). | ||||
| CVE-2026-64172 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235) Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and share the same erratum #1235: hardware may read a stale IsRunning=1 bit during ICR write emulation and silently fail to generate an AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU. The absence of the VM-Exit causes KVM to miss the required wakeup of blocking target vCPUs, leading to hung vCPUs and unbounded delays in guest execution. Extend the existing AMD Family 17h erratum #1235 workaround to also cover Hygon Family 18h. With IPI virtualization disabled, KVM never sets IsRunning=1 in the Physical ID table, so every non-self IPI generates a VM-Exit and is correctly emulated. | ||||
| CVE-2026-63297 | 1 Canonical | 1 Lxd | 2026-08-13 | 9.9 Critical |
| An authorization bypass vulnerability in LXD due to a timing flaw during configuration merging allows an authenticated attacker to bypass target project restrictions during cross-project instance copies. When copying an instance to a target project, LXD performs restriction checks before configuration merging is complete, creating a time-of-check to time-of-use (TOCTOU) condition. An attacker can exploit this flaw to copy instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. | ||||
| CVE-2026-64156 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs, afs: Fix write skipping in dir/link writepages Fix netfs_write_single() and afs_single_writepages() to better handle a write that would be skipped due to lock contention and WB_SYNC_NONE by returning 1 from netfs_write_single() if it skipped and making afs_single_writepages() skip also. If a skip occurs, the inode must be re-marked as the VFS may have cleared the mark. This is really only theoretical for directories in netfs_write_single() as the only path to that is through afs_single_writepages() that takes the ->validate_lock around it, thereby serialising it. | ||||
| CVE-2026-53116 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ap: use generic driver_override infrastructure When the AP masks are updated via apmask_store() or aqmask_store(), ap_bus_revise_bindings() is called after ap_attr_mutex has been released. This calls __ap_revise_reserved(), which accesses the driver_override field without holding any lock, racing against a concurrent driver_override_store() that may free the old string, resulting in a potential UAF. Fix this by using the driver-core driver_override infrastructure, which protects all accesses with an internal spinlock. Note that unlike most other buses, the AP bus does not check driver_override in its match() callback; the override is checked in ap_device_probe() and __ap_revise_reserved() instead. Also note that we do not enable the driver_override feature of struct bus_type, as AP - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". Additionally, AP has a custom counter that is modified in the corresponding custom driver_override_store(). | ||||
| CVE-2026-68429 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe() A hotplug or link-loss event can tear down the MST topology (setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check is already performed under mgr->lock, the condition is not a programming error but a valid race -- the topology was valid when the caller decided to call this function, but was torn down before the lock was acquired. Replace the drm_WARN_ON() with a graceful early return. This eliminates spurious kernel warnings and the resulting compositor crashes observed when connecting/disconnecting DP MST monitors, while keeping the correct behavior of doing nothing when MST is not active. A drm_dbg_mst() trace is added so the skipped probe remains observable under MST debug logging. The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst() already catches the case where the topology is initialized twice, so no diagnostic coverage is lost. | ||||
| CVE-2026-53250 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. | ||||