Search Results (107555 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-116149 1 Imagemagick 1 Imagemagick 2026-10-29 8.1 High
ImageMagick before 6.9.13-58 and 7.x before 7.1.2-33 contains a stack-based buffer overflow in the handling of bzip2 compressed images. Attackers can supply a crafted image using bzip2 compression to overwrite stack memory during decoding, causing crashes or memory corruption.
CVE-2026-98932 1 Linux 2 Linux, Linux Kernel 2026-10-29 7.4 High
In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altr_portb_setup(), the error path freed the dci structure before releasing the devres group. Since the managed single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an IRQ firing between freeing dci and unregistering the IRQs could dereference the freed memory. Release the devres group first so the managed IRQs are unregistered before the dci structure is freed.
CVE-2026-98945 1 Linux 2 Linux, Linux Kernel 2026-10-29 7.8 High
In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open.
CVE-2026-98952 1 Linux 2 Linux, Linux Kernel 2026-10-29 7.3 High
In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure that the UDP header and the 4 byte PFCP header are in the linear area. When the S flag is set, pfcp_session_recv() then reads the 8 byte SEID that follows, which is not covered by the pskb_may_pull() check. A short PFCP packet with the S flag set, or one whose session header lies in a fragment, therefore makes pfcp_session_recv() read beyond the end of the packet data, and whatever it finds there is stored in the tunnel metadata that flower later classifies on. Pull up to the end of the SEID before reading it, and drop packets that are too short to contain it. Reload the header pointer afterwards since pskb_may_pull() may reallocate the skb head. Use offsetofend() rather than sizeof(struct pfcphdr_session): the structure is not packed, so its size is 16 bytes because of the alignment of the __be64 member, while the header on the wire is only 12 bytes, and valid session messages would be dropped.
CVE-2026-98964 1 Linux 2 Linux, Linux Kernel 2026-10-29 7.5 High
In the Linux kernel, the following vulnerability has been resolved: nvmet: use the local P2P device on metadata allocation failure nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data and metadata SGL allocations succeed. If the data allocation succeeds but the metadata allocation fails, out_free_sg passes req->p2p_dev to pci_p2pmem_free_sgl() before that assignment has taken place. Pass the local p2p_dev argument instead, so cleanup uses the same PCI device as the successful data allocation.
CVE-2026-98988 1 Linux 2 Linux, Linux Kernel 2026-10-29 8.8 High
In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change.
CVE-2026-90867 2 Progress, Progress Software 2 Ws Ftp Server, Ws Ftp Server 2026-10-29 8.1 High
Improper access control in the Web Admin console of Progress Software WS_FTP Server versions prior to 2024.0.7 and 2025.0.4 on Windows could expose administrative functionality to remote authentication attempts.
CVE-2026-96108 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-29 7.8 High
Use after free in Desktop Window Manager allows an authorized attacker to elevate privileges locally.
CVE-2026-95943 1 Microsoft 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more 2026-10-29 7 High
Double free in Connected Devices Platform Service (Cdpsvc) allows an authorized attacker to elevate privileges locally.
CVE-2026-83741 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-29 7.8 High
Use after free in Internet Explorer allows an authorized attacker to elevate privileges locally.
CVE-2026-83740 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-29 7 High
Use after free in Windows Hello allows an authorized attacker to elevate privileges locally.
CVE-2026-83739 1 Microsoft 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more 2026-10-29 7.5 High
Use after free in Windows Bluetooth Service allows an unauthorized attacker to execute code over an adjacent network.
CVE-2026-83738 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-29 7 High
Use after free in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally.
CVE-2026-83725 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-29 8.8 High
Heap-based buffer overflow in Microsoft Windows Search Component allows an unauthorized attacker to execute code over a network.
CVE-2026-83513 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-29 7.8 High
Use after free in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to elevate privileges locally.
CVE-2026-83514 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-29 7.8 High
Heap-based buffer overflow in Windows Partition Management Driver allows an authorized attacker to elevate privileges locally.
CVE-2026-83735 1 Microsoft 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more 2026-10-29 7.8 High
Release of invalid pointer or reference in Windows Kernel allows an authorized attacker to elevate privileges locally.
CVE-2026-83516 1 Microsoft 14 Windows 10 1809, Windows 11 24h2, Windows 11 24h2 and 11 more 2026-10-29 7.5 High
Out-of-bounds read in Windows Local Security Authority Subsystem Service (LSASS) allows an unauthorized attacker to deny service over a network.
CVE-2026-98968 1 Linux 2 Linux, Linux Kernel 2026-10-29 8.1 High
In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same way amt_send_advertisement() transmits from the receive path. The query never waits in a qdisc, the tunnel is only dereferenced inside the RCU section that found or created it, and nothing is stored in skb->cb, so no lookup or refcount is needed. Remove the query branch of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no users left. Behaviour changes: - The relay's own General Queries no longer pass through the amt device's egress path: its qdisc, tc egress (clsact/tcx), the netfilter egress hook and packet taps. They are still visible as UDP on the underlay. - A query that is sent successfully is no longer counted as tx_dropped. The old query branch left through the unlock label, which counted every sent query as dropped. - A query that reaches amt_dev_xmit() on a relay from elsewhere, such as a userspace querier, is now dropped at the IGMP/MLD type switch. Before, it trusted whatever skb->cb held, and a NULL tunnel hit the WARN_ON(1).
CVE-2026-98980 1 Linux 2 Linux, Linux Kernel 2026-10-29 8.8 High
In the Linux kernel, the following vulnerability has been resolved: namei: don't reveal overmounted entries in refwalk In rcuwalk the dentry is validated before it is accepted. step_into() step_into() rechecks d_seq and __follow_mount_rcu() rechecks mount_lock. An entry that gets unlinked in between causes the lookup to retry and miss. A refwalk doesn't do this. lookup_fast() takes a reference on the hashed dentry and simply accepts it. So an unlink that happens after the reference was taken isn't seen by refwalk. That's fine for a simple file. We just happened to open it before it was unlinked, no problem. For a mountpoint and specifically a locked mountpoint it very much isn't. The unlink detaches all mounts and then removes the name. Any refwalk that hasn't traversed the mounts yet simply reveals the underlying entry. It's a very narrow window but it can be hit: reads of a covered file in 60 s, 3 walkers, ~15000 unlinks no widening 27 that step + 200 us 3741 See the appended patch for a more reliable reproducer. So check the entry after step_into(). unlink(), rmdir() and rename() mark the dentry with dont_mount() before they detach the mounts and remove the dentry. So a dentry that is marked with DCACHE_CANT_MOUNT and is unhashed by the time its mounts were looked at is a name that was unlinked under the refwalk. DCACHE_CANT_MOUNT is read after the mounts were looked up and it is set before they are detached by detach_mounts(). A refwalk that missed the mounts will see DCACHE_CANT_MOUNT. Plain d_unlinked() is fine. A rename takes the dentry off its hash chain but ___d_drop() leaves d_hash.pprev set. So only __d_drop() and a rename over the dentry unhash it. The only move that flips IS_ROOT splices in a disconnected alias. That doesn't have DCACHE_CANT_MOUNT set. Add the to step_into_slowpath(). ".." and LOOKUP_DOWN may legitimately land on an unhashed directory. A refwalk that crossed onto a mount has path.mnt different from nd->path.mnt. A dentry that a filesystem dropped on its own (d_invalidate(), d_drop()) doesn't have the flag set and is treated as before. // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against walkers that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_othe ---truncated---