| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: clear fb_info->mode before deleting a videomode
fb_set_var() can delete a mode from info->modelist when userspace
passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code
checks that the mode being deleted is not the current info->var and
that fbcon is not using it, but it does not check fb_info->mode.
fb_info->mode may still point into the modelist entry being deleted.
If the entry is freed, later mode sysfs reads through show_mode() can
dereference a stale pointer.
Clear fb_info->mode before calling fb_delete_videomode() when it
matches the mode being removed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/shmem_helper: Check VMA boundaries for PMD mappings
In the ->huge_fault handler do not install a PMD huge page
mapping if the huge page exceeds the boundaries of the VMA.
All other ->huge_fault handlers have similar checks and the
resulting mapping will trigger a VM_BUG_ON_VMA() if it ever
reaches copy_pmd_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disallow multiple FENCE chunks in one submit
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD decode image min size calculation
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate GEM_CREATE domain combinations
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
(cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure first IDAW remains constant
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Limit the number of channel program segments
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sloppy-logic-analyzer: fix use-after-free via debugfs trigger on unbind
The "trigger" debugfs file has a hand-rolled ->write handler
(trigger_write()) that dereferences the per-device gpio_la_poll_priv. The
file is created with debugfs_create_file_unsafe(), and the handler never
takes a debugfs reference. Nothing keeps the object alive while the
handler runs.
priv is allocated with devm_kzalloc(). devres frees it when the platform
device is unbound. debugfs_create_file_unsafe() installs no full_proxy
wrapper, so debugfs_remove_recursive() in gpio_la_poll_remove() does not
wait for an in-flight trigger_write(). The blob_lock taken there does not
help, because trigger_write() never takes it. A write that races an unbind
therefore writes into freed memory:
trigger_write() gpio_la_poll_remove()
priv = m->private
buf = memdup_user() [may sleep]
mutex_lock(&priv->blob_lock)
debugfs_remove_recursive() [no wait]
mutex_unlock(&priv->blob_lock)
(remove returns; devres frees priv)
priv->trig_data = buf <-- use-after-free write
priv->trig_len = count
The race is reachable by root via
/sys/bus/platform/drivers/gpio-sloppy-logic-analyzer/unbind.
Create "trigger" with debugfs_create_file() instead. Its full_proxy
wrapper makes debugfs_remove_recursive() drain any in-flight ->write
before it returns.
The use-after-free is confirmed under KASAN with a minimal reproducer of
the same debugfs_create_file_unsafe() plus devm_kzalloc() pattern
(available on request); it produces a slab-use-after-free write in the
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: hynitron_cstxxx - validate touch count and finger IDs
The driver allocates max_touch_num input slots, which are indexed from
zero through max_touch_num - 1. The current check allows a finger ID
equal to max_touch_num to reach cst3xx_report_contact(). While the input
core ignores out-of-range slot indices, reporting touch data without a
valid slot change corrupts the touch state of the previously active slot.
The touch count is read from the controller's report and is used to
index the fixed-size report buffer without first checking its range.
Reject counts larger than the supported number of touch slots before
checking the trailing byte or parsing touch data.
Reject finger IDs equal to or greater than max_touch_num, and return
immediately when an invalid finger ID is encountered so that corrupt
touch frames are discarded instead of reporting partial contact state.
The V821 Avaota F1 board configures the vendor driver with one touch
slot, so finger ID 1 is already invalid on that device. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1]. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Continue the pipeline trigger in case of IPC timeout
Ignore IPC errors for pipeline state change if the firmware state is
crashed or the IPC has timed out.
If the firmware has crashed the kernel still needs to go through the state
changes to reset its internal to be able to correctly work the next time
the DSP is booted up.
The case with IPC timeout is a bit more problematic, but it has been
rootcaused to be the result of system scheduling blockage and the firmware
did actually received and handled the message, but the reply handling got
blocked by issues outside of the SOF stack.
So far the best way to handle this is to continue with setting the state. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix potential NULL pointer dereference
dasd_release_space() checks the implementation of the is_ese()
discipline function before calling it to determine if a given device is
an ESE DASD.
The current usage of the logical AND operator will lead to a NULL
pointer dereference as the function is called even if the function
pointer is NULL.
Fix this by using the logical OR operator. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait()
In picolcd_send_and_wait(), an integer overflow of the signed loop counter
'k' can theoretically lead to a NULL pointer dereference of 'raw_data'.
If the loop executes more than INT_MAX times, 'k' becomes negative,
making the condition 'k < size' true even when 'size' is 0.
Change the type of 'k' to 'unsigned int' to prevent the overflow and
eliminate the out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[jkosina@suse.com: extended hash length] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
syz-executor292/9514 is trying to acquire lock:
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
but task is already holding lock:
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622
lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158
process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310
worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391
kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389
ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244
-> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}:
check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline]
check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904
__lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline]
start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline]
__flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
__cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline]
disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514
sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline]
kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline]
sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107
sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236
sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526
sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if dml21_add_phantom_plane() is successful
Verify that the phantom plane was allocated to avoid a later
segfault.
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) |
