| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in vas3k TaxHacker up to 0.8.2. Impacted is the function buildImapConfig of the file lib/email-sync/imap-client.ts of the component Email Sync. Executing a manipulation of the argument host/port can lead to server-side request forgery. It is possible to launch the attack remotely. The pull request to fix this issue awaits acceptance. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure a non-secure Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise that causes the connector to send authentication credentials to an attacker-controlled server, allowing for exposure of credentials that compromise all relevant data sent through the connector and limited alteration of event delivery. The vulnerability is possible because HTTP Event Collector endpoint validation does not require secure transport by default. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| Adobe Campaign Classic Gold Standard 10 (and earlier), 20.3.1 (and earlier), 20.2.3 (and earlier), 20.1.3 (and earlier), 19.2.3 (and earlier) and 19.1.7 (and earlier) are affected by a server-side request forgery (SSRF) vulnerability. Successful exploitation could allow an attacker to use the Campaign instance to issue unauthorized requests to internal or external resources. |
| Server-side request forgery (ssrf) in Microsoft Exchange Online allows an unauthorized attacker to elevate privileges over a network. |
| Server-side request forgery (ssrf) in Azure Data Factory allows an unauthorized attacker to disclose information over a network. |
| RansomLook contains insufficient resource validation in the analysis PDF generation functionality. Analysis documents are converted from Markdown to HTML and passed to WeasyPrint for PDF rendering. Prior to the fix, WeasyPrint used its default URL fetcher, allowing resource references contained in an analysis to be resolved without restrictions.
An authenticated attacker able to create or modify an analysis could embed crafted resource references using schemes such as file:// or http://. When the analysis was subsequently rendered as PDF, WeasyPrint would process these references with the privileges and network access of the RansomLook server.
A malicious file:// reference could cause the renderer to access arbitrary files readable by the RansomLook process, potentially exposing sensitive configuration, credentials, or other local data through rendered resources. Network URLs could cause the server to initiate requests to localhost, internal network services, or external systems, resulting in server-side request forgery (SSRF) and potentially bypassing network-level access restrictions.
The patch introduces a dedicated WeasyPrint URL fetcher that permits only data: resources, the RansomLook report logo, and files contained within the analysis asset directory. Network resources and filesystem paths outside these explicitly permitted locations are rejected. |
| fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version. |
| A Server-side request forgery (SSRF) vulnerability has been identified in the SMA1000 Appliance Work Place interface. A remote unauthenticated attacker could potentially cause the appliance to make requests to unintended location. |
| In OpenStack Glance through 32.0.0, the /v2/tasks API accepts type=import tasks that
bypass import_filtering_opts, allowing an admin to fetch internal
URLs from the Glance service network (aka SSRF), as long as https:// or http:// is used. This API has been available only to admins since Xena, and it has been deprecated for several releases. |
| fast-uri is a URI parser for Node.js. Its custom parser for bracketed IPv6 literals does not validate the complete IPv6 grammar, so invalid trailing text in an authority can be silently discarded and a malformed attacker-controlled host is turned into a different valid IPv6 destination. For example, a bracketed literal with invalid trailing characters is normalized to the unspecified address, which a Node HTTP client then connects to a local service over loopback, and other malformed literals collapse to private-range addresses. No error is set on the parsed result, so an application checking the error field cannot detect the rewrite. An application that normalizes untrusted URLs before outbound requests, redirects, proxy routing, or address-policy enforcement can be redirected to a local or private IPv6 target, giving a server-side request forgery and address-policy bypass primitive. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which validate bracketed IP literals against the full grammar and mark malformed literals as authority errors. Users should upgrade to a patched version. |
| Contributor Server Side Request Forgery (SSRF) in Shared Files <= 1.7.69 versions. |
| CKAN MCP Server is a tool for querying CKAN open data portals. A known vulnerability CVE-2026-33060 indicated tools including ckan_package_search and sparql_query that accept a base_url parameter had the risk of making HTTP requests to arbitrary endpoints without restriction. A fix was applied to filter out ip addresses. However, a method to bypass exists prior to version 0.4.106. CKAN MCP Server validates caller-supplied CKAN server URLs by inspecting only the parsed hostname string before issuing outbound HTTP requests. In `src/utils/http.ts`, hostname aliases such as `ip6-localhost` are not equal to `localhost`, are not dotted IPv4 literals, and are not bracketed IPv6 literals, so they pass the SSRF filter but can resolve to loopback when the server performs the request. A remote MCP caller that can invoke CKAN tools with a `server_url` can therefore make the server connect to local or private addresses and, for CKAN-shaped responses, receive response-derived data. The updated fix in version 0.4.106 replaced the single `hostname === 'localhost'` check with a blocked-hostname `Set` covering `ip6-localhost` and `ip6-loopback`. |
| SiYuan before v3.7.4 contains a server-side request forgery (SSRF) vulnerability in the isPrivateIP function in kernel/util/net.go, used by SSRFSafeDialer to enforce SSRF protection in SafeMode. The function only checks for loopback, link-local unicast, private, and unspecified addresses and does not recognize IPv6 transition addresses (NAT64 64:ff9b::/96, 6to4 2002::/16, Teredo 2001::/32) that embed private IPv4 destinations. When SafeMode is enabled, an authenticated attacker can bypass the SSRF guard via the network forward proxy, WebSocket proxy, or SSE proxy endpoints by supplying a URL whose hostname resolves to such a transition address, reaching internal services and cloud metadata endpoints (e.g., 169.254.169.254). Because the forward proxy returns the full response body, this is a full-read SSRF that can be used to steal instance credentials, reach internal services, and port-scan internal infrastructure. |
| Unleash is an open-source feature management platform. Prior to 7.5.2, 7.6.5, and 8.0.2, the addon and integration subsystem passes the operator-controlled parameters.url value from src/lib/addons/webhook.ts and the Slack, Microsoft Teams, Datadog, and New Relic integrations to Addon.fetchRetry in src/lib/addons/addon.ts without restricting loopback, link-local, private, or cloud metadata addresses. An authenticated actor with the root CREATE_ADDON or UPDATE_ADDON permission can cause the server to send requests from inside its network boundary, use integration event status as a blind probing oracle, forward Authorization, customHeaders, or DD-API-KEY values to an attacker-observed host, and deliver the feature-event JSON body to internal services. This issue is fixed in versions 7.5.2, 7.6.5, and 8.0.2. |
| SpecifyJS is a declarative TypeScript user interface framework. Prior to version 0.2.136, when `new URL()` throws a parse error, the `assertSecureUrl` function returned without throwing, silently allowing the request to proceed without HTTPS validation. Starting in version 0.2.136, the catch block now throws an error instead of silently returning. |
| MobSF is a mobile application security testing tool used. Prior to 4.5.1, get_browsable_activities in mobsf/StaticAnalyzer/views/android/manifest_analysis.py validates only an Android manifest android:host value with valid_host before appending a separately supplied android:port to the URL fetched by _check_url, allowing an authenticated user to upload a crafted APK that makes requests to an attacker-selected nonstandard port at /.well-known/assetlinks.json. With an attacker-controlled hostname and DNS rebinding between validation and the requests.get connection, the request can reach an internal service, although redirects remain disabled and the path is fixed. This issue is fixed in version 4.5.1. |
| ArcadeDB before 26.8.1 contains a server-side request forgery vulnerability in the OpenCypher LOAD CSV implementation that fails to validate HTTP/HTTPS URLs. Authenticated attackers can craft LOAD CSV queries pointing to internal network addresses or cloud metadata endpoints to make the ArcadeDB server fetch and return sensitive data from restricted services. |
| A Server-Side Request Forgery (SSRF) vulnerability has been reported in PTC Windchill PDMLink and PTC FlexPLM. The vulnerability may be exploited through the deserialization of untrusted data. |
| In Cisco Talos Intelligence for Enterprise Security Cloud versions below 1.0.3, a user that holds a role with the get_talos_enrichment capability could send a crafted request to the Talos intelligence enrichment Representational State Transfer (REST) API endpoint and cause the instance to make an outbound request to an attacker-controlled server. The request could expose tokens that compromise all relevant data and system integrity in the Splunk instance. The vulnerability is possible because the Talos intelligence enrichment REST endpoint accepts the destination for authenticated Splunk management requests from request data. For more information see Deploy Cisco Talos Intelligence for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.0/introduction/deploy-cisco-talos-intelligence-for-splunk-enterprise-security-cloud-only) in the Splunk documentation. |
| In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, and Splunk Secure Gateway versions below 3.10.9, 3.9.23, and 3.8.70, a user who does not hold the "admin" or "power" Splunk roles could use crafted report notification data to cause Splunk Secure Gateway to send a request to the Splunk Enterprise Representational State Transfer (REST) API using a system-level session token and modify the Splunk platform configuration. The user could then obtain a session token without a password and use it to access all relevant data and affect system integrity. The vulnerability is possible because Splunk Secure Gateway does not validate decoded report notification identifiers before using them to construct requests to the Splunk Enterprise REST API. |
