| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to obtain sensitive information due to a server-side request forgery vulnerability. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to obtain sensitive information due to a server-side request forgery (SSRF) vulnerability. |
| IBM Langflow OSS 1.0.0 through 1.12.3 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| IBM Langflow OSS 1.0.0 through 1.12.3 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| IBM Langflow OSS 1.0.0 through 1.12.3 could allow a remote attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of code in eval/exec. |
| IBM Langflow OSS 1.0.0 through 1.12.8 could allow a remote attacker with a low-privileged authenticated account to cause the Agentic Assistant to generate or submit component code using these unblocked patterns, resulting in arbitrary operating system command execution on the server. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary commands due to improper control of code generation. |
| IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote attacker to trigger pre-existing stored Python component code in a public workflow, executing it under the flow owner's runtime context within the server process. This bypasses the intended trust boundary where public execution paths are restricted to server-trusted component code. |
| Immutable.js provides many Persistent Immutable data structures. Prior to versions 3.8.3, 4.3.7, and 5.1.5, Prototype Pollution is possible in immutable via the mergeDeep(), mergeDeepWith(), merge(), Map.toJS(), and Map.toObject() APIs. This issue has been patched in versions 3.8.3, 4.3.7, and 5.1.5. |
| Use of uninitialized resource in Windows Event Logging Service allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr
amdgpu_debugfs_gpr_read() drops its runtime PM reference right after
reading the wave registers. When copying them to userspace fails, it
jumps to the err label, which drops the reference a second time. A read
into a bad buffer on Navi31 either steals a reference somebody else
holds (power/runtime_usage goes from 1 to 0) or underflows the count:
amdgpu 0000:03:00.0: Runtime PM usage count underflow!
The registers are already in the kernel buffer at that point, so finish
the hardware access first and copy the buffer with a single
copy_to_user() instead of the put_user() loop with its own error path.
(cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in
smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION,
that is the whole of struct object_id_info, but writes only 46 of them:
- objid[] is 16 bytes, and when the volume UUID is not available only
sizeof(stfs.f_fsid) (8) bytes are copied into it;
- extended_info.version_string[] is STRING_LENGTH (28) bytes, and only
strlen("1.1.0") (5) bytes are copied into it.
The response buffer is zeroed on allocation (kvzalloc() in
smb2_allocate_rsp_buf()), so for a standalone request the remaining 31
bytes are zero. In a compound request they need not be. The offset of
the next response is advanced by the length pinned for the previous one,
so if a preceding command wrote its reply into the buffer and then
failed, smb2_set_err_rsp() pins only the short error response and the
next reply lands inside the area that has already been written. Only
the header is cleared there:
memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2);
The client then receives up to 31 bytes of a response it was not meant
to see, including one that failed with an access denied error.
Clear the structure before filling it in. As a side effect
version_string is now NUL terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv->op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45
i2s_bus already disabled
...
Workqueue: pm pm_runtime_work
Call trace:
...
clk_core_disable from clk_disable+0x28/0x34
clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s]
i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298
genpd_runtime_suspend from __rpm_callback+0x48/0x18c
__rpm_callback from rpm_callback+0x4c/0x50
rpm_callback from rpm_suspend+0xf4/0x718
rpm_suspend from pm_runtime_work+0x9c/0xa0
...
Fix this by enabling op_clk in probe right after getting it, so the clock
state matches the runtime PM active state, and by disabling it in remove. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: validate transport header presence in set_ipv6_addr
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key->ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
Fix this by returning early in update_ipv6_checksum() if l4_proto is
NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset
for fragments while preserving the debug warning for any other protocol
where the transport header is unexpectedly missing.
See the syzbot trace:
!skb_transport_header_was_set(skb)
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635
[...]
RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline]
RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline]
RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399
[...]
Call Trace:
<TASK>
set_ipv6 net/openvswitch/actions.c:531 [inline]
do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366
ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592
ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705
genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114
genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800 |
