| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()
The commit c8e008b60492 ("ext4: ignore xattrs past end")
introduced a refcount leak in when block_csum is false.
ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to
get iloc.bh, but never releases it with brelse(). |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized. |
| Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions. This vulnerability affects the GSSAPI patches added by various Linux distributions and does not affect the OpenSSH upstream project itself. The usage of sshpkt_disconnect() on an error, which does not terminate the process, allows an attacker to send an unexpected GSSAPI message type during the GSSAPI key exchange to the server, which will call the underlying function and continue the execution of the program without setting the related connection variables. As the variables are not initialized to NULL the code later accesses those uninitialized variables, accessing random memory, which could lead to undefined behavior. The recommended workaround is to use ssh_packet_disconnect() instead, which does terminate the process. The impact of the vulnerability depends heavily on the compiler flag hardening configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_report()
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear trailing padding in build_polexpire()
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix reference count leak in rxrpc_server_keyring()
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix OOM ->tfm_count leak
If memory allocation fails, decrement ->tfm_count to avoid blocking
future reads. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()
struct irdma_create_ah_resp { // 8 bytes, no padding
__u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx)
__u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK
};
rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().
The reserved members of the structure were not zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always mark signal+subflow endp as used
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:ffffc90001663880 EFLAGS: 00010293
RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
