| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
Before using list_first_entry, make sure to check that list is not
empty, if list is empty return -ENODATA.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix possible access to freed memory in link clear
After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.
Here is a crash example:
BUG: unable to handle page fault for address: ffffffff8f220860
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23
Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
_raw_spin_lock_irqsave+0x30/0x40
mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
tasklet_action_common.isra.21+0x66/0x100
__do_softirq+0xd5/0x29c
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x37/0x40
irq_exit_rcu+0x9d/0xa0
sysvec_call_function_single+0x34/0x80
asm_sysvec_call_function_single+0x12/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix abort logic in btrfs_replace_file_extents
Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file. This
occurs because the if statement to decide if we should abort is wrong.
The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code. However the
prealloc code uses this path too. Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code. |
| A flaw was found in dbus-broker. When the process file-descriptor limit is reached, EMFILE/ENFILE errors during peer setup (notably SO_PEERPIDFD) are handled as fatal failures, causing the broker to exit. A local attacker who can open many connections to the user session bus can trigger this and deny service to the desktop session. Flatpak applications can reach the host session bus through the dbus proxy. |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Prior to 1.13.0, a malformed packet received during the SFTP connection handshake causes a Go panic. This issue is fixed in version 1.13.0. |
| CoreDNS is a DNS server written in Go. From 1.9.4 until 1.14.5, a network DNS client allowed to request AXFR for a CoreDNS zone can trigger a panic when CoreDNS is configured with k8s_external headless-service zone transfers and Kubernetes contains a headless service endpoint with no declared ports; plugin/kubernetes/object/endpoint.go creates Port: -1, plugin/k8s_external/msg_to_dns.go skips that service, plugin/k8s_external/transfer.go sends an empty []dns.RR batch, and plugin/transfer/transfer.go indexes records[0] without checking the batch is non-empty. This issue is fixed in version 1.14.5. |
| Valibot helps validate data using a schema. Versions prior to 1.4.2 can throw a TypeError inside its flatten() helper when validation issues contain attacker-controlled object keys such as toString, valueOf, or hasOwnProperty. The issue is reachable through normal record() validation. record() intentionally filters __proto__, prototype, and constructor, but it still accepts other own keys that collide with inherited Object.prototype properties. If the record key schema or value schema rejects such an entry, Valibot creates an issue path containing that key. Passing the resulting issues to Valibot's documented flatten() helper causes flatErrors.nested[dotPath] to resolve to the inherited method instead of an own error array, and the helper calls .push(...) on that function. This is not a global prototype pollution issue. The impact is availability/error handling: applications that validate user-controlled objects with record() and flatten validation errors for API responses can crash the request path with a TypeError instead of returning structured validation errors. This issue has been fixed in version 1.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix handling of server side tls alerts
Scott Mayhew discovered a security exploit in NFS over TLS in
tls_alert_recv() due to its assumption it can read data from
the msg iterator's kvec..
kTLS implementation splits TLS non-data record payload between
the control message buffer (which includes the type such as TLS
aler or TLS cipher change) and the rest of the payload (say TLS
alert's level/description) which goes into the msg payload buffer.
This patch proposes to rework how control messages are setup and
used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a
kvec backed msg buffer and read in the control message such as a
TLS alert. Msg iterator can advance the kvec pointer as a part of
the copy process thus we need to revert the iterator before calling
into the tls_alert_recv. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item() |
| Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion.
The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source.
On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover.
This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15. |
| SurrealDB versions before 3.1.0 contain a denial of service vulnerability where malicious LIVE queries with WHERE clauses that evaluate to errors cause all CREATE, UPDATE, and DELETE operations on the watched table to fail. An authenticated user with only select permission can prevent write operations on a table for any user, including root, by registering a LIVE query that triggers evaluation errors until the query is killed or the session ends. |
| With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush. |
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. Prior to 7.4.13 and 8.0.13, MailomatRequestParser::validateSignature() parsed X-MOM-Webhook-Signature as algo=signature and passed the request-selected algorithm to hash_hmac(), allowing a signature algorithm downgrade instead of enforcing Mailomat's documented SHA-256 webhook signature. This issue is fixed in versions 7.4.13 and 8.0.13. |
| Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, consumers running drift detection in CI / cron could see transient adapter failures silently cached as "all clear" — masking real attacks for up to six hours — or see ordinary provider-version churn falsely promoted to incident severity. Either way, the verdict source was unreliable for downstream incident workflows that gate on it. This issue has been patched in version 1.4.0. |
| DOMPurify through 3.3.3 fails to sanitize DOM elements passed via IN_PLACE mode when the element originates from a different window/realm (e.g., an iframe's contentDocument). A cross-realm instanceof check in the private _isNode() function returns false for foreign-realm nodes, causing DOMPurify to stringify the element (yielding '[object HTMLDivElement]'), silently reset IN_PLACE to false, and return the unsanitized element unchanged with any XSS payloads intact. |
| pgjdbc is an open source postgresql JDBC Driver. In releases 42.7.4 through 42.7.11, channelBinding=require connections can be silently downgraded from SCRAM-SHA-256-PLUS with channel binding to plain SCRAM-SHA-256 without it, losing the man-in-the-middle protection the setting is meant to guarantee. An attacker who can intercept the TLS connection can trigger the downgrade with a certificate whose signature algorithm has no tls-server-end-point channel-binding hash, because the bundled com.ongres.scram:scram-client returns an empty byte array instead of failing and pgJDBC ScramAuthenticator checks only that the server advertised a PLUS mechanism, without rejecting the empty binding or checking that the negotiated mechanism uses channel binding. This issue is fixed in version 42.7.12. |
| SCRAM (Salted Challenge Response Authentication Mechanism) is part of the family of Simple Authentication and Security Layer (SASL, RFC 4422) authentication mechanisms. Prior to 3.3, a flaw in com.ongres.scram:scram-client and com.ongres.scram:scram-common allows an attacker capable of a TLS man-in-the-middle attack to silently downgrade a connection from SCRAM-SHA-256-PLUS with channel binding to standard SCRAM-SHA-256 without channel binding when TlsServerEndpoint processes an X.509 certificate using a modern signature algorithm such as Ed25519; getChannelBindingData() can return an empty byte array after NoSuchAlgorithmException, and the ScramClient builder treats that as absent channel-binding data. This issue is fixed in version 3.3. |
| Mattermost Desktop App versions <=6.2 5.5.13 6.0.2.0 fail to properly null check when checking for headers in the Mattermost Desktop App which allows any user to crash another channel members Desktop App via posting a malicious link with an embedded image that misses one of those headers. Mattermost Advisory ID: MMSA-2026-00668 |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. Prior to 2.11.0, Excelize parses shared-string cell values with strconv.Atoi and checks only the upper bound before indexing the shared string slice, allowing an XLSX file containing a shared-string cell with -1 to trigger sharedStrings[-1] and panic when read through GetCellValue or GetRows. This issue is fixed in version 2.11.0. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device initiates a TCP connection to an attacker-controlled system that responds with a specific packet, this causes a PFE crash and restart, which affects all services until the system has automatically recovered.
This issue can happen among others in the following scenarios: ALG, SSL proxy, UTM, RTLOG, AppQoE probing, AAMW, ICAP, URL filtering.
This issue affects Junos OS on MX Series with SPC3, SRX5k Series with SPC3, SRX1600 Series, SRX2300 Series, SRX4000 Series, and vSRX Series:
* all versions before 23.2R2-S4,
* 23.4 versions before 23.4R2-S5,
* 24.2 versions before 24.2R2. |
