Export limit exceeded: 384855 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22833 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80627 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: mm: Fix out-of-bounds write in maar_res_walk() maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges. | ||||
| CVE-2026-80525 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Refresh copier IPC payload before widget setup The ipc_config_data buffer for copier widgets is built once during ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached for reuse. For host copiers this buffer contains the copier_data with gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link DMA. On suspend/resume, both host and link DMA streams are released and re-allocated with potentially different stream tags. The underlying copier_data and dma_config_tlv structures are correctly updated by host_config and sdw_hda_dai_hw_params respectively. However, since the widget list (spcm->stream[].list) persists across suspend, sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare never runs again to rebuild ipc_config_data. The stale cached payload is then sent to firmware with boot-time DMA channel assignments, causing DMA channel conflicts that lead to firmware errors and crashes. Fix this by refreshing copier_data and dma_config_tlv portions of ipc_config_data in sof_ipc4_widget_setup right before the IPC message is sent. This ensures the payload always reflects the current DMA state regardless of whether ipc_prepare ran. For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily inflated to include the TLV size (matching the ipc_config_data layout) before copying, then restored, mirroring what sof_ipc4_prepare_copier_module does when first building the buffer. | ||||
| CVE-2026-80592 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468 Call trace: damon_new_region+0xf4/0x118 (P) damon_set_regions+0xfc/0x3c0 damon_sample_mtier_build_ctx+0xe8/0x3a8 damon_sample_mtier_start+0x1c/0x90 damon_sample_mtier_enable_store+0x98/0xb0 param_attr_store+0xb4/0x128 module_attr_store+0x2c/0x50 sysfs_kf_write+0x58/0x90 kernfs_fop_write_iter+0x16c/0x238 vfs_write+0x2c0/0x370 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0xa8/0x118 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x54/0x370 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Note that the same issue can happen if detect_node_addresses is true, and node 0 or 1 is memoryless. Fix it together by checking the validity of parameters right before damon_new_region() and fail early if they're invalid. | ||||
| CVE-2026-74735 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. | ||||
| CVE-2026-80519 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: finish crypto callback cleanup before peer release Crypto completion callbacks hold both key-slot and peer references. The peer reference pins the netdev, and dropping the last peer reference can let netdev unregistration and module removal make progress. Do not release that peer reference before the callback has finished its own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can schedule an RCU callback backed by module text after ovpn_cleanup rcu_barrier has already run. The TX error path also freed the remaining skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev lifetime window. Release the key slot and free any remaining skb first, then drop the peer reference as the last callback action. | ||||
| CVE-2026-80521 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge(). | ||||
| CVE-2026-80522 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req() Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way it is done in tegra_ccm_crypt_init(). The current formulae may lead to a crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize remains zero. Then a decrypt operation with incorrect rctx->cryptlen will lead to a write beyound rctx->dst_sg buffer. As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since it appears to be completely unused. Also simplify tegra_ccm_setauthsize() and tegra_gcm_setauthsize() functions respectively. | ||||
| CVE-2026-80578 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: Fix pointer desynchronization in fb_io_read() In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. | ||||
| CVE-2026-80589 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. | ||||
| CVE-2026-80644 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel. | ||||
| CVE-2026-80572 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. | ||||
| CVE-2026-80610 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured. | ||||
| CVE-2026-80708 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed. | ||||
| CVE-2026-80588 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: reclaim forward-allocated memory on RX path errors After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"), errors in the receive path prior to queueing skbs into the receive queue do not trigger forward-allocated memory reclaiming. Prevent forward memory from growing unboundedly in pathological drop scenarios by explicitly reclaiming memory when skbs are dropped. | ||||
| CVE-2026-80711 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors. | ||||
| CVE-2026-80602 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-80611 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry. | ||||
| CVE-2026-80621 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Avoid dwc_pcie_rasdes_debugfs_deinit() NULL dereference when no RAS DES capability dwc_pcie_rasdes_debugfs_init() returns success when the controller has no RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which dereferences rasdes_info unconditionally. Return early when no RAS DES state was allocated. In that case no RAS DES mutex was initialized, so there is nothing to destroy. [mani: reworded subject] | ||||
| CVE-2026-80623 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117 | ||||
| CVE-2026-80624 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mfd: cs42l43: Sanity check firmware size Currently the code checks if a firmware was received, however it does not verify that the firmware size is larger than the firmware header. As the firmware pointer is dereferenced as a pointer to the header structure this could lead to an out of bounds memory access. Add the missing check. | ||||