| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Fix use-after-free in nlmsvc_retry_blocked
nlmsvc_retry_blocked() examines the block at the head of nlm_blocked
under nlm_blocked_lock, then releases the lock before calling
nlmsvc_grant_blocked() or retry_deferred_block(). The nlm_blocked list
reference is all that keeps the block alive across that window.
nlmsvc_grant_blocked() does take one of its own, but not until after
the lock has been dropped. Unmounting the nfsd filesystem while a lock
request is still blocked reaches nlmsvc_traverse_blocks(), which drops
the list reference and frees the block along with the nlm_rqst hanging
off it.
BUG: KASAN: slab-use-after-free in nlm_async_call+0xd6/0x230
Read of size 8 at addr ffff88811b04c808 by task lockd/8377
nlm_async_call+0xd6/0x230
nlmsvc_retry_blocked+0x61c/0x800
lockd+0x144/0x1c0
Freed by task 8392:
nlmsvc_release_block+0x231/0x290
nlmsvc_traverse_blocks+0x139/0x1b0
nlm_traverse_files+0x1aa/0xa00
nlmsvc_free_host_resources+0x12/0x60
nlm_shutdown_hosts_net+0x127/0x280
lockd_down+0xd5/0x1c0
Take a reference before releasing nlm_blocked_lock and drop it once
the retry has run. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix superblock use-after-free in release_inode()
Without this fix, release_inode() (task 1) can race with a umount
operation in hook_sb_delete() (task 2). The order of operations in
which the race occurs is:
* task 2: hook_sb_delete() arrives at the end of the function, waiting
for landlock_superblock(sb)->inode_refs to become zero.
* task 1: release_inode(): does atomic_long_dec_and_test(), decrementing
inode_refs to zero.
* task 2: gets woken up through some other means, sees that inode_refs
is zero and returns. The caller is the unmount operation and proceeds
to release the superblock.
* task 1: Runs wake_up_var(&landlock_superblock(sb)->inode_refs),
*dereferencing the sb_security on the freed-up superblock*.
Notably, wake_up_var() does not dereference the pointer passed to it,
and only uses it to determine an overapproximated set of tasks to wake
up. So while it's potentially possible for an attacker to provide a
different value for that pointer, this only results in the wrong set of
tasks getting woken up, and in this scenario, no further tasks are
actually waiting.
Nevertheless, KASAN detects it as a slab-use-after-free read on
sb->s_security:
BUG: KASAN: slab-use-after-free in release_inode+0x196/0x290
Read of size 8 at addr ffff888103b6c0a8 by task repro/217
release_inode+0x196/0x290
landlock_put_object+0x71/0x90
landlock_free_rules+0x38/0xc0
landlock_put_ruleset+0x47/0x130
fop_ruleset_release+0x33/0x40
__fput+0x305/0x780
Freed by task 54:
kfree+0x11c/0x390
process_scheduled_works+0x766/0xe50
worker_thread+0x7bc/0xb20
The fix is to determine &landlock_superblock(inode->i_sb)->inode_refs only once
earlier in release_inode(), and later use that precalculated address for the
wake_up_var() call, without having to dereference through the superblock. |
| Denial of service through folded HTTP response headers.
The HTTP stream wrapper joins each continuation line of a folded response header to the accumulated value by allocating a new string and copying the whole value, so a response with many short continuation lines takes disproportionate CPU time to parse. An attacker who controls an HTTP or HTTPS response fetched through file_get_contents(), fopen() or other stream functions, by making the application request a chosen URL or by influencing a server it already contacts, can keep PHP workers busy. Repeated or concurrent requests can cause a denial of service.
This issue affects PHP versions from 8.1.32 through 8.1.34, from 8.2.28 before 8.2.36, from 8.3.18 before 8.3.37, from 8.4.5 before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix event queue release use-after-free
iommufd_eventq_fops_release() drops the file's users reference before
reading eventq->ictx. Once that reference is dropped, IOMMU_DESTROY in
another thread can remove and free the event queue, so the later load
accesses freed memory.
Read ictx while the users reference still pins the event queue, then
drop the reference and put the saved context. The context reference
taken by iommufd_eventq_init() keeps ictx valid until the put. Fault and
vEVENTQ file descriptors share this release path. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: fix use-after-free in nvmet_fc_ls_create_connection()
nvmet_fc_ls_create_connection() looks up the association with
nvmet_fc_find_target_assoc(), which returns it with a reference held,
and drops that reference as soon as the target queue has been allocated.
iod->assoc is then dereferenced again by nvmet_fc_makeconnid() while
building the connection id.
The queue only borrows the pointer and takes no reference of its own.
Once the lookup reference is dropped the association is kept alive
solely by the reference taken when it was created, so a disconnect LS or
a remote port unregister running concurrently can free it before
nvmet_fc_makeconnid() reads it:
BUG: KASAN: slab-use-after-free in nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021)
Read of size 8 at addr ffff888179f1b000 by task kworker/u9:2/1167
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nvmet-wq nvmet_fc_handle_ls_rqst_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021)
process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (archkernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Freed by task 1167 on cpu 0 at 405.998150s:
kasan_save_track (mm/kasan/common.c:57 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (include/linux/kasan.h:235 mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720)
nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:1808 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021)
process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (archkernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888179f1b000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 0 bytes inside of
freed 2048-byte region [ffff888179f1b000, ffff888179f1b800)
Hold the lookup reference until the response has been built, and drop it
on the error path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix use-after-free of the old registrant in nvmet_pr_preempt()
nvmet_pr_preempt() handles a preempt sent by the reservation holder by
changing the reservation type with nvmet_pr_update_reg_attr(), unless
the reservation is of an All Registrants type. For the holder that
helper does not modify the registrant in place: it puts a copy on the
registrant list, points pr->holder to the copy and passes the old
registrant to kfree_rcu().
If the reservation type changed, nvmet_pr_preempt() then hands
®->hostid of that old registrant to nvmet_pr_resv_released(). Unless
the reservation released notification is masked, that function takes
subsys->lock and compares the host id against every controller of the
subsystem. The caller only holds pr->pr_sem and is not in an RCU
read-side critical section, so nothing keeps the old registrant alive
while it is read.
The result is a read of 16 freed bytes that decides which controllers
get the notification. Found by code inspection. kfree_rcu() defers
the free, so it usually happens after the read; when the pending free
is forced to run before the read, KASAN reports the host id as freed
memory.
Pass the host id of the controller that sent the command instead. The
registrant was looked up by that host id, and the controller outlives
the request. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix use-after-free unregistering kbd_led led
kbd_led_update_all() registers asus->kbd_led with
devm_led_classdev_register() on the platform device, but kbd_led is
embedded in struct asus_wmi, which asus_wmi_remove() frees at its end.
The driver core calls .remove() before devres_release_all(), so the
deferred devres release runs led_classdev_unregister() on memory that
has already been freed. Whether that faults depends on whether the
slab has been reused in between, which makes the crash on module
unload intermittent and silently corrupts the led classdev state in
the remaining runs.
Unregister the led classdev explicitly in asus_wmi_led_exit(), after
the led workqueue has been destroyed: kbd_led_work can then neither
run nor be queued anymore, since asus_ref.asus is NULL too, so
kbd_led_registered is stable and the classdev can be released while
the memory embedding it is still alive. devm_led_classdev_unregister()
also drops the devres entry, leaving nothing to run at unbind cleanup
time; it warns when no devres entry exists, hence the
kbd_led_registered check. |
| SOAP information disclosure through malformed array dimensions.
The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: EM: Fix use-after-free of perf domain in netlink doit handlers
The doit handlers dropped em_pd_list_mutex before dereferencing the
perf domain, so a concurrent device unregister could free it while the
reply was being built.
Encode the reply from em_perf_domain_for_id() callbacks, which run
under the mutex, and allocate the skb outside of it, like the dumpit
path already does.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
pps: generators: fix use-after-free when closing a removed device
The cdev of a PPS generator is embedded in struct pps_gen_device, but
nothing ties the lifetime of that structure to the cdev: pps_gen is
freed by the release function of its device, and an open file holds a
device reference only until pps_gen_cdev_release() drops it.
When the generator is unregistered while /dev/pps-genN is open, that
put_device() drops the last reference and frees pps_gen, and __fput()
then calls cdev_put() on the freed cdev:
BUG: KASAN: slab-use-after-free in cdev_put+0x53/0x60
Read of size 8 at addr ffff88801383e138 by task ppsgen64/149
Call Trace:
cdev_put+0x53/0x60
__fput+0x745/0xad0
fput_close_sync+0xd9/0x1b0
__x64_sys_close+0x86/0xf0
...
Freed by task 149:
kfree+0x25a/0x6d0
device_release+0xca/0x3c0
kobject_put+0x169/0x320
pps_gen_cdev_release+0x51/0x80
__fput+0x36a/0xad0
pps.c had the same bug, fixed in commit c79a39dc8d06 ("pps: Fix a
use-after-free").
Fix it the usual way: embed the struct device in pps_gen_device and
register both with cdev_device_add(). This makes the device the parent
of the cdev, so the cdev holds a device reference until the last file
is closed. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in mport_mm_close()
A use-after-free vulnerability was identified in mport_mm_close() in
drivers/rapidio/devices/rio_mport_cdev.c, identical to the pattern
previously addressed in dma_req_free().
This is observable from userspace when an application creates an mmap
mapping via the RapidIO character device and subsequently unmaps it (or
terminates, triggering exit_mmap()). During munmap, mport_mm_close() is
invoked and drops the mapping reference via kref_put().
If kref_put() drops the last reference, mport_release_mapping() is called,
which frees the underlying rio_mport_mapping structure. The subsequent
mutex_unlock() then dereferences map->md to unlock buf_mutex, leading to a
use-after-free:
mport_mm_close()
-> mutex_lock(&map->md->buf_mutex);
...
-> kref_put(&map->ref, mport_release_mapping); /* map is freed */
-> mutex_unlock(&map->md->buf_mutex); /* UAF: map used */
Fix this by caching map->md before kref_put() and using the cached pointer
for mutex unlocking, ensuring that freed memory is not accessed. |
| PHP-FPM request smuggling through an unread HTTP request body.
PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: avoid use-after-free in icrdma_remove
icrdma_remove() dereferences iwdev after calling
irdma_ib_unregister_device():
irdma_ib_unregister_device(iwdev)
-> ib_unregister_device(&iwdev->ibdev)
-> __ib_unregister_device()
-> ib_dealloc_device()
irdma registers irdma_ib_dealloc_device() as the dealloc_driver
callback in its ib_device_ops. The RDMA core explicitly documents
ib_unregister_device() that when ops.dealloc_driver is used, ib_dev
will be freed upon return from the function.
The ib_device is embedded in struct irdma_device and iwdev itself was
allocated by ib_alloc_device(irdma_device, ibdev). Consequently, once
irdma_ib_unregister_device() returns, iwdev must no longer be
dereferenced.
However, icrdma_remove() currently accesses iwdev->rf afterwards when
deinitializing interrupts, destroying ah_tbl_lock, and freeing rf.
Although the final ib_device storage is released with kfree_rcu(), the
object lifetime has already ended and callers must not rely on the RCU
grace period to continue dereferencing iwdev.
Save iwdev->rf before unregistering the RDMA device and use the saved
pointer for the remaining cleanup.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Fix DMABUF use-after-free during ufile cleanup
The DMABUF release can race with ufile cleanup. When the cleanup holds
hw_destroy_rwsem for write, uverbs_uobject_release() fails its trylock
and leaves the uobject on the ufile list, but the dma_buf is freed as
soon as the release returns. The cleanup then destroys the uobject and
uses the freed dma_buf:
BUG: KASAN: slab-use-after-free in uverbs_dmabuf_fd_destroy_uobj+0x46/0x200
Read of size 8 at addr ff11000109cf14b0 by task repro/435
Call Trace:
uverbs_dmabuf_fd_destroy_uobj+0x46/0x200
destroy_hw_fd_uobject+0x3f/0x50
uverbs_destroy_uobject+0xc5/0x380
__uverbs_cleanup_ufile+0x1a8/0x260
uverbs_destroy_ufile_hw+0x54/0x160
ib_uverbs_close+0x34/0x110
Allocated by task 435:
dma_buf_export+0x1b5/0x530
ib_uverbs_handler_UVERBS_METHOD_DMABUF_ALLOC+0x223/0x3f0
Freed by task 436:
kfree+0x301/0x530
dentry_kill+0x14c/0x560
__fput+0x23a/0x4a0
rdma_user_mmap_entry_remove() dereferences the same pointer.
Protect the stored dma_buf pointer with a mutex and clear it before
release returns. Use a shared revoke helper so uobject destruction and
mmap entry removal both skip a cleared pointer. Hold a temporary uobject
reference across uverbs_uobject_release() and the pointer update.
Use a separate mutex because uobject destruction can free the mmap entry
before release finishes. Map and unmap use attachment->dmabuf directly,
so they do not need to take the new mutex while holding the reservation
lock. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a local reenq node left on an inactive cpu
A local DSQ reenq is queued on the rq through a per-sched node and run from
deferred work. When the reenq is requested from dispatch, the work is a
balance callback queued once dispatch is done. A cpu going down installs
balance push early in its teardown, and queue_balance_callback() refuses new
callbacks from then on. ops.dispatch() keeps running on that cpu until the
rq goes offline after an RCU grace period, so a reenq it requests in that
window may never run. The IMMED handling in dispatch_one() requests one the
same way.
A reenq requested from elsewhere for a cpu that is already offline goes
through irq_work_queue_on(), which warns, and its work doesn't run until the
cpu comes back.
Either way the node stays on the rq's list. When the scheduler is freed,
scx_sched_free_rcu_work() warns and frees the pcpu with the node still
linked, and the list is walked again once the cpu comes back.
An inactive cpu's local DSQ holds only tasks that are bound to it or are
being moved off, so the reenq is pointless. Ignore reenqs of an inactive
cpu's local DSQ.
The test is lockless. The hotplug thread of a cpu going down runs on that
cpu, and it marks the cpu inactive before it installs balance push. A
dispatch on the cpu runs to completion before that thread can run there, so
a dispatch that saw the cpu active has queued its callback by then. Requests
from outside dispatch run from the wakeup path or through irq_work, which
balance push doesn't affect. The grace period after the cpu goes inactive
waits for any requester that saw it active, so that irq_work is queued while
the cpu is online. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in cifs_ses_add_channel()
The error path of cifs_ses_add_channel() calls cifs_put_tcp_session()
before cifs_chan_clear_need_reconnect(). The latter reaches
cifs_ses_get_chan_index(), which dereferences server->terminate; if
the put was the final reference, TCP_Server_Info is already freed and
this is a use-after-free. Same put-then-use pattern as the recently
fixed sibling in commit 717e0a25036b ("cifs: Fix server use-after-free
in cifs_chan_skip_or_disable()").
Move the put last, but do not read chan->server after dropping
chan_lock: chan points into ses->chans[], and once chan_count is
decremented a concurrent add_channel can reuse the slot and overwrite
the pointer, so the put would act on the new channel's server. Cache
the pointer under chan_lock, clear the reconnect bit and decrement
chan_count while still holding the reference, and release it after
the unlock.
This issue was discovered by Tencent CodeBuddy Security. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: free the EP4 URB when input setup fails
The three controllers that use the EP4 input URB allocate it before
checking the endpoint type and before registering the input device. On
failure they jump to exit_free_idev, which clears cdev->input_dev but
leaves cdev->ep4_in_urb set. The card teardown then calls
snd_usb_caiaq_input_free(), which returns early because input_dev is
NULL, so the URB is never freed.
Release the URB before dropping the input device on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: write-lock the VMA before waking waiters when unregistering
userfaultfd_unregister() wakes pending missing faults before clearing the
VMA's userfaultfd registration. With per-VMA fault locking, holding
mmap_lock for write does not prevent another fault from queuing after
the wakeup but before userfaultfd_clear_vma() write-locks the VMA. That
waiter can then remain asleep indefinitely.
Call vma_start_write() before waking waiters. Existing fault handlers
queue themselves before dropping the VMA read lock, and new readers are
excluded until mmap_write_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: always recheck the pmd in try_collapse_pte_mapped_thp()
try_collapse_pte_mapped_thp() drops the PTE lock after it has cleared the
page table, and takes the PMD lock and the PTE lock to remove it.
In between, MADV_DONTNEED with CONFIG_PT_RECLAIM can reclaim the
page table. The pmd_same() check is supposed to handle this, but it is
only done with CONFIG_SPLIT_PTE_PTLOCKS.
Fix it by performing the check unconditionally.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: adjust description ] |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_blk: use synchronous quiesce in virtblk_freeze_priv()
blk_mq_run_work_fn() can call blk_mq_sched_dispatch_requests() through
blk_mq_run_dispatch_ops(). The dispatcher checks QUEUE_FLAG_QUIESCED
while the flag is clear. It can then be preempted before it gets a
request. At that time, it has no queue usage reference, so
blk_mq_freeze_queue() does not wait for it.
virtblk_freeze_priv() then calls blk_mq_quiesce_queue_nowait() and
blk_mq_unfreeze_queue(). A new request can enter the queue. The old
dispatcher can run again, use its old flag check, get the new request,
and call virtio_queue_rq(). At the same time, virtblk_freeze_priv() can
reset the device, delete the virtqueues, and free vblk->vqs. The old
dispatcher can then use a deleted virtqueue or a NULL vblk->vqs, and the
kernel can crash.
Fix this by using blk_mq_quiesce_queue(), which waits for dispatch code
that was already running. Keep the existing freeze and unfreeze order.
The queue remains quiesced until virtblk_restore_priv() calls
blk_mq_unquiesce_queue(). |