| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert
loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or
fail. But its guard is inverted: it skips policies with prefixlen <
threshold and preallocates for the rest.
prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and
the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the
loop preallocates for the exact policies (which never allocate) and skips
the inexact ones, whose bin/node is then allocated GFP_ATOMIC during
reinsert. On failure the error path only WARN_ONCE()s and continues,
leaving a poisoned bydst node; the next rebuild's hlist_del_rcu()
dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure,
deterministic via failslab.
Invert the guard so preallocation covers exactly the reinserted policies;
the reinsert then allocates nothing and cannot fail.
Crash:
Oops: general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead...]
...
Workqueue: events xfrm_hash_rebuild
RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190
RAX: dead000000000122 (LIST_POISON2 + offset)
...
Call Trace:
hlist_del_rcu (include/linux/rculist.h:599)
xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: free fib_alias with kfree_rcu() on insert error path
fib_table_insert() publishes new_fa into the leaf's fa_list with
fib_insert_alias() before calling the fib entry notifiers. When a
notifier fails, the error path removes new_fa with fib_remove_alias()
(hlist_del_rcu) and frees it right away with kmem_cache_free().
fib_table_lookup() walks that list under rcu_read_lock() only, so a
concurrent lookup that already reached new_fa keeps reading it after the
free:
BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601)
Read of size 1 at addr ffff88810676d4eb by task exploit/297
Call Trace:
fib_table_lookup (net/ipv4/fib_trie.c:1601)
ip_route_output_key_hash_rcu (net/ipv4/route.c:2814)
ip_route_output_key_hash (net/ipv4/route.c:2705)
__ip4_datagram_connect (net/ipv4/datagram.c:49)
udp_connect (net/ipv4/udp.c:2144)
__sys_connect (net/socket.c:2167)
__x64_sys_connect (net/socket.c:2173)
do_syscall_64
entry_SYSCALL_64_after_hwframe
which belongs to the cache ip_fib_alias of size 56
Triggering the error path needs CAP_NET_ADMIN and a registered fib
notifier that can reject a route; a netdevsim device whose IPv4 FIB
resource is exhausted is enough.
Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already
does for a fib_alias removed from the trie. |
| Valkey is a distributed key-value database. Prior to 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1, Valkey's tlsProcessPendingData function iterates pending_list while an authenticated client can trigger CLIENT KILL, causing connTLSClose to delete the iterator's cached next node and producing a use-after-free that can crash the server or potentially allow remote code execution when TLS is enabled. This issue is fixed in versions 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1. |
| Privilege escalation due to invalid pointer in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| Use-after-free in the JavaScript: GC component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work
Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports
and closes the CPU port conduits:
dsa_switch_for_each_cpu_port(dp, priv->ds)
dev_close(dp->conduit);
mxl862xx_remove() unregisters the switch before cancelling this work:
set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
cancel_delayed_work_sync(&priv->stats_work);
dsa_unregister_switch(ds);
mxl862xx_host_shutdown(priv);
dsa_unregister_switch() frees the dsa_port objects. If a CRC error
schedules the work during teardown it can run after the ports have been
freed and dereference freed memory.
Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set
before dsa_unregister_switch(). DSA tears the ports down under
rtnl_lock(), so checking the flag under rtnl_lock() means the work either
runs before teardown and sees valid ports, or runs afterwards, observes
the flag and skips the walk. This mirrors the host_flood_work handler,
which skips torn-down ports under rtnl_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-adsp: fix UAF during device teardown
When the SOF audio driver fails to initialize (e.g. firmware boot
timeout), its devres unwind frees the snd_sof_dev object that the
mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback.
The mtk-adsp-mailbox shutdown clears the mailbox command registers
but leaves the IRQ line unmasked, so a late interrupt can still
queue a threaded handler after mbox_free_channel() had cleared
chan->cl, and mbox_chan_received_data() would then trigger UAF:
BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version
sof_ipc3_validate_fw_version
sof_ipc3_do_rx_work
sof_ipc3_rx_msg
mt8196_dsp_handle_request
mtk_adsp_ipc_recv
mbox_chan_received_data
mtk_adsp_mbox_isr
irq_thread_fn
Freed by task ...:
kfree
devres_release_all
really_probe
... (sof-audio-of-mt8196 probe failure)
The crash was observed roughly three seconds after the failed probe.
disable_irq() in shutdown and enable_irq() in startup. disable_irq()
also waits for any in-flight interrupts, so by the time
mbox_free_channel() proceeds to clear chan->cl no rx_callback can run.
In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked
between probe and the first client bind — otherwise an early interrupt
can crash on chan->cl == NULL in mbox_chan_received_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have
reused.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/bpf-ops: reject re-registration of an already-bound ops
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Fix use-after-free in user_event_mm_dup()
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt
tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls
crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret()
without installing a completion callback, discards both return values,
and immediately frees the kpp_request via kpp_request_free(). When the
resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE,
keembay-ocs), either operation returns -EINPROGRESS and the deferred
completion worker dereferences the freed request.
The path fires automatically from the hwrng_fillfn kernel thread via
tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session ->
tpm_buf_append_salt on every entropy poll, without any userland action.
Install crypto_req_done as the completion callback, wrap both KPP
operations in crypto_wait_req(), and propagate errors to the caller.
The wait is a no-op for synchronous backends. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: modedb: fix a possible UAF in fb_find_mode()
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in tipc_l2_send_msg()
Syzbot reported a slab-use-after-free in ipvlan_hard_header() when
called from tipc_l2_send_msg().
The root cause is that tipc_disable_l2_media() calls synchronize_net()
while b->media_ptr is still valid. This allows concurrent RCU readers
to obtain the device pointer after synchronize_net() has finished.
The pointer is cleared later in bearer_disable(), but without any
subsequent synchronization, allowing the device to be freed while
still in use by readers.
Fix this by clearing b->media_ptr in tipc_disable_l2_media() before
calling synchronize_net().
This is safe to do now because the call order in bearer_disable()
was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic")
to call tipc_node_delete_links() (which needs the pointer) before
disable_media().
https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync(). |
| Use after free in TabStrip in Google Chrome on Mac prior to 151.0.7922.137 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
