| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A potential DLL hijacking vulnerability was reported in Lenovo Service Bridge that, under certain conditions, could allow a local authenticated user to execute code with elevated privileges. |
| Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative write privileges to conduct a stored cross-site scripting (XSS) attack or a reflected XSS attack against a user of the web-based management interface of an affected device.
These vulnerabilities are due to insufficient sanitization of user-supplied data that is stored in the web page. An attacker could exploit these vulnerabilities by convincing a user of the interface to click a specific link or view an affected web page. The injected script code may be executed in the context of the web-based management interface or allow the attacker to access sensitive browser-based information. |
| A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root.
This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system. |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system and read arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system. |
| A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent could allow an authenticated, local attacker with low privileges to overwrite arbitrary files on the local system of an affected device.
This vulnerability is due to improper access controls on files that are on the local file system of an affected device. An attacker could exploit this vulnerability by placing a symbolic link in a specific location on the local file system. A successful exploit could allow the attacker to bypass file system permissions and overwrite arbitrary files on the affected device. |
| A vulnerability in the authentication service feature of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass authentication policy requirements.
This vulnerability is due to improper validation of user-supplied authentication input in HTTP requests. An attacker could exploit this vulnerability by sending HTTP requests that contain specific authentication requests to an affected device. A successful exploit could allow the attacker to bypass policy enforcement on the device. There is no direct impact to the Cisco Secure Web Appliance. However, as a result of exploiting this vulnerability, an attacker could send HTTP requests that should be restricted through the device. |
| A vulnerability in the Desktop Agent functionality of Cisco Webex Contact Center could have allowed an unauthenticated, remote attacker to conduct cross-site scripting attacks. Cisco has addressed this vulnerability in the Cisco Webex Contact Center service, and no customer action is needed.
This vulnerability existed because HTML and script content was not properly handled. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to steal sensitive information from the browser, including authentication and session information. |
| A vulnerability in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least Read Only Admin credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of these vulnerabilities could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| A vulnerability in the integration of single sign-on (SSO) with Control Hub in Cisco Webex Services could have allowed an unauthenticated, remote attacker to impersonate any user within the service.
This vulnerability existed because of improper certificate validation. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by connecting to a service endpoint and supplying a crafted token. A successful exploit could have allowed the attacker to gain unauthorized access to legitimate Cisco Webex services. |
| A vulnerability in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least Read Only Admin credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of these vulnerabilities could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| In Splunk MCP Server app versions below 1.0.3 , a user who holds a role with access to the Splunk `_internal` index or possesses the high-privilege capability `mcp_tool_admin` could view users session and authorization tokens in clear text.<br><br>The vulnerability would require either local access to the log files or administrative access to internal indexes, which by default only the admin role receives. <br><br>Review roles and capabilities on your instance and restrict internal index access to administrator-level roles. See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities) and [Connecting to MCP Server and Admin settings](https://help.splunk.com/en/splunk-enterprise/mcp-server-for-splunk-platform/connecting-to-mcp-server-and-admin-settings) in the Splunk documentation for more information. |
| CentSDR commit e40795 was discovered to contain a stack overflow in the "Thread1" function. |
| A prompt injection vulnerability in Windsurf 1.9544.26 allows remote attackers to execute arbitrary commands on a victim system. When Windsurf processes attacker-controlled HTML content, malicious instructions can cause unauthorized modification of the local MCP configuration and automatic registration of a malicious MCP STDIO server, resulting in execution of arbitrary commands without further user interaction. Successful exploitation may allow attackers to execute commands on behalf of the user, persist malicious MCP configuration changes, and access sensitive information exposed through the application. |
| Jaaz 1.0.30 contains a remote code execution vulnerability in its MCP STDIO command execution handling. A remote attacker can send crafted network requests to the network-accessible Jaaz application, causing attacker-controlled commands to be executed on the server. Successful exploitation results in arbitrary command execution within the context of the Jaaz service, potentially allowing full compromise of the affected system. |
| LangChain-ChatChat 0.3.1 contains a remote code execution vulnerability in its MCP STDIO server configuration and execution handling. A remote attacker can access the publicly exposed MCP management interface and configure an MCP STDIO server with attacker-controlled commands and arguments. When the MCP server is started and MCP is enabled for agent execution, subsequent agent activity triggers execution of arbitrary commands on the server. Successful exploitation allows arbitrary command execution within the context of the LangChain-ChatChat service. |
| A flaw was found in KubeVirt's Role-Based Access Control (RBAC) evaluation logic. The authorization mechanism improperly truncates subresource names, leading to incorrect permission evaluations. This allows authenticated users with specific custom roles to gain unauthorized access to subresources, potentially disclosing sensitive information or performing actions they are not permitted to do. Additionally, legitimate users may be denied access to resources. |
| CWE-798: Use of Hard-coded Credentials in Sonatype Nexus Repository Manager versions 3.0.0 through 3.70.5 allows an unauthenticated attacker with network access to gain unauthorized read/write access to the internal database and execute arbitrary OS commands as the Nexus process user. Exploitation requires the non-default nexus.orient.binaryListenerEnabled=true configuration to be enabled. |
| IdentityIQ 8.5, all
IdentityIQ 8.5 patch levels prior to 8.5p2, IdentityIQ 8.4, and all IdentityIQ
8.4 patch levels prior to 8.4p4 allow authenticated users assigned the Debug
Pages Read Only capability or any custom capability with the ViewAccessDebugPage
SPRight to incorrectly create new IdentityIQ objects. Until a remediating security fix or patches
containing this security fix are installed, the Debug Pages Read Only
capability and any custom capabilities that contain the ViewAccessDebugPage
SPRight should be unassigned from all identities and workgroups. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.1, a server-side template injection vulnerability which leads to RCE via AI Agent exists. Impact is limited to environments where an attacker can control or influence type_enrichment_data (typically high-privilege administrative configuration). This vulnerability is fixed in 7.0.1. |
