| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.16, _read_character_string and _read_string in src/zeroconf/_protocol/incoming.py advanced self.offset by attacker-declared RDLENGTH without checking it against self._data_len, allowing unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb) to send a TXT, HINFO, or A/AAAA record with rdlength=65535 and seed DNSCache and ServiceInfo.properties with truncated, attacker-shaped key/value or address records. This issue is fixed in version 0.149.16. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: use dst in this direction when pushing IPIP header
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing. |
| Dell iDRAC9, versions prior to 7.20.30.50, and Dell iDRAC10, version prior to 1.20.60.50, contain a Remanent Data Readable after Memory Erase vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Don't move a peeked OOB message onto the pending queue
rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and,
if a response is needed, moves it onto the pending_oobq tree. However,
only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto
pending_oobq always runs.
As a result, reading a challenge with MSG_PEEK leaves the skb on
recvmsg_oobq while also adding it to pending_oobq. Since struct
sk_buff's rbnode shares storage with its next and prev pointers,
rb_insert_color() overwrites the list linkage, and the skb, which holds
a single reference, becomes reachable from both queues at once.
When the socket is closed both queues are drained in turn. While
draining recvmsg_oobq, __skb_unlink() follows the next and prev
pointers that rbnode has overwritten and writes to a bad address. Also,
as the skb holds a single reference but is freed from each queue, both
the skb and the connection reference it holds are released twice. This
leads to memory corruption and to a use-after-free caused by the
connection refcount underflow.
MSG_PEEK does not consume the message from the queue, so only unlink it
from recvmsg_oobq and then move it onto pending_oobq or free it when
the message is actually consumed. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, normalizeStats() in node.js, reached unconditionally through getStat() and loadStat() on every browserslist() call, processes untrusted browserslist-stats.json, opts.stats, and CLI --stats data with an unguarded for...in loop and plain-object bracket access and assignment, allowing inherited Object.prototype keys including __proto__, toString, valueOf, constructor, hasOwnProperty, and isPrototypeOf to cause an uncaught TypeError or modify the prototype of the returned normalized object. This issue is fixed in version 4.28.7. |
| Weak authentication in Microsoft Windows Search Component allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: nat_keepalive: avoid double free on send error
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
Use axi_dmac_free_desc() to free fully the descriptor at fail path when
call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). |
| In the Linux kernel, the following vulnerability has been resolved:
kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES
When using scratch_scale, the scratch sizes are rounded up to
CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This
is not done when using fixed scratch sizes via command line. This can
result in user specifying a size which is not aligned, and thus kernel
releasing a pageblock that is only partially scratch.
Do the rounding up for both cases in scratch_size_update(). |
| ParseAcceptLanguage quadratic-time DoS via Locale middleware on unauthenticated requests |
| Mongoose is a MongoDB object modeling tool designed to work in an asynchronous environment. Prior to 6.13.10, 7.8.10, 8.24.1, and 9.7.2, passing a user-controlled update such as MyModel.updateOne(filter, req.body) can exploit Mongoose update casting with a __proto__.x dotted path under $set. Schema.prototype.path and Schema.prototype._getPathType can treat inherited properties of schema.paths and schema.nested as schema types, allowing the casting process to set $fullPath and $parentSchemaDocArray on Object.prototype before throwing. This prototype pollution makes those properties visible on newly created objects and can cause application integrity and availability impacts. This issue is fixed in versions 6.13.10, 7.8.10, 8.24.1, and 9.7.2. |
| Form::Processor::Field::HtmlArea versions from 0.06 through 1.162360 for Perl allow attacker selected method dispatch and resource exhaustion via an HTML::Tidy diagnostic that validate passes to add_error as a Locale::Maketext template.
validate runs HTML::Tidy over the submitted markup and passes each resulting message to add_error as its first argument, which add_error hands to the language handle as the Locale::Maketext message key. The default handle's lexicon sets `_AUTO`, so a message that is not a lexicon entry is compiled as a bracket notation template instead of being looked up. Tidy diagnostics quote the offending attribute name or value, so a bracket group in the submitted markup reaches the template position, where the first token of the group names a method called on the language handle and the remaining tokens are its arguments. A group such as `[0]` makes the compile croak, and neither the field nor the handle catches it, so the exception leaves validate. `[sprintf,%2000000000d,7]` reaches CORE::sprintf with an attacker chosen field width.
One submission of crafted markup to an HtmlArea field throws an unhandled exception out of form validation or allocates an arbitrary amount of memory, and an application whose language handle subclass defines side effecting public methods makes those callable with attacker chosen arguments. The other field types pass fixed templates with the submitted value in an argument slot, where it stays inert, and are unaffected. |
| compliance-trestle is a tooling platform for managing compliance as code. Versions prior to 3.12.2 and 4.0.3 have a Server-Side Template Injection (SSTI) vulnerability exists in the `trestle author jinja` command. The command recursively evaluates rendered templates, allowing an attacker to achieve arbitrary command execution with privileges of the running process by injecting malicious payloads into data fields (such as SSP documents or Lookup Tables). The vulnerability does not require attacker control of the template itself. Only attacker-controlled input data rendered into a trusted template is required. This distinction is critical: the template author may only intend to render plain text (e.g., `Title: {{ ssp.metadata.title }}`), but because of the recursive parsing, the data field itself becomes executable. The vulnerability is caused by recursive re-compilation and re-rendering of already-rendered output. Versions 3.12.3 and 4.0.3 patch the issue. |
| js-yaml is a JavaScript YAML parser and dumper. From 5.0.0 until 5.2.2, parsing a small YAML document can take exponential time when an application calls load() or loadAll() on untrusted input. In src/parser/parser.ts, readFlowCollection uses restoreState and calls parseNode a second time when a flow-sequence entry is recognized as a key: value pair. If the key is a nested flow sequence of the same shape, every level is parsed twice, causing O(2^n) work and allowing an input under 200 bytes to keep one CPU busy for minutes, block the Node.js event loop, and stall the process. No anchors, aliases, merges, tags, or nondefault options are required. This issue is fixed in version 5.2.2. |
| CamaleonCMS 2.9.1 contains a server-side template injection vulnerability that allows authenticated administrators to execute arbitrary commands by embedding ERB tags in the email parameter of the test_email settings action, which are evaluated when an SMTP rejection reflects the recipient address back in the exception message rendered as an inline ERB template. Attackers can submit a crafted email parameter containing ERB expressions through the admin settings test_email endpoint, causing the Rails inline template renderer to evaluate attacker-controlled Ruby code and achieve arbitrary command execution as the Rails process user. |
| rsync 3.2.3 before 3.5.0 contains an out-of-bounds write in parse_size_arg() where the return value of snprintf() is used directly as an index into a .bss-segment array without bounds checking. When snprintf truncates the formatted size string, the return value equals the number of characters that would have been written including the truncated portion, and this value may exceed the array length. The subsequent indexed write targets memory outside the intended array bounds, corrupting .bss memory. |
| Grav CMS before 2.0.13 contains a server-side template injection vulnerability in email-action parameters that allows low-privileged page editors to execute arbitrary operating-system commands. Attackers can inject Twig payloads using the unsandboxed find filter in email subject, body, to, or from fields to achieve remote code execution when forms are submitted. |
