| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| nanoid (Nano ID) before 3.3.16 and 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition. |
| fflate through 0.8.2 is vulnerable to denial of service via an infinite loop in unzipSync(). A crafted ZIP archive with a central directory entry declaring compressed_size=0xFFFFFFFF (ZIP64 sentinel) but missing the required ZIP64 extra field tag 0x0001 causes z64e() to loop indefinitely due to out-of-bounds reads returning undefined, which coerces to 0, keeping the loop condition permanently true. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race
Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue
for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock:
the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,
calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI
devices and waits for the host to become runtime-active. But the host
cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the
drain is blocked on that very handler.
However skipping the drain reintroduces a race: hisi_sas returns from
resume before all PHY UP work and libsas discovery work finish. The
controller may then autosuspend while disks are still waking up. The
disks issue IO to a suspended controller, the IO fails, and the disks
get disabled.
Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT
notification to after sas_drain_work(). By then the host resume is about
to complete, so device removal through device_link no longer blocks on
the resume and the cycle is broken.
With the deadlock gone, restore sas_resume_ha() (the draining variant)
in hisi_sas and remove sas_resume_ha_no_sync().
The reorder is safe for the other libsas consumers (isci, pm8001,
aic94xx, mvsas). During suspend, sas_suspend_devices() calls
sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to
NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a
timed-out phy's disk is immediately rejected by the LLDD before reaching
hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),
and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both
complete directly via scsi_done() without entering SCSI EH. This is
identical in both the old and new ordering since lldd_dev_gone runs
during suspend, before resume. The reorder only affects when the
PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()
vs. asynchronous after resume returns), not whether I/O can reach the
device. aic94xx and mvsas do not register any PM ops and never reach
this code path. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate PMSR FTM preamble range
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
[drop unnecessary check] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix infinite loop in __tipc_nl_compat_dumpit
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error. |
| MyBB is free and open source forum software. Prior to 1.8.40, the built-in CAPTCHA does not consistently enforce single-use semantics, allowing remote attackers to bypass CAPTCHA controls through challenge replay. The successful validation paths in contact.php, member.php?action=do_resendactivation, member.php?action=do_lostpw, member.php?action=do_emailuser, and sendthread.php?action=do_sendtofriend do not call captcha::invalidate_captcha() for the MyBB Default CAPTCHA selected by the captchaimage setting. A valid response can therefore be reused until a non-vulnerable endpoint invalidates it, an incorrect response is submitted, or the challenge expires. This issue is fixed in version 1.8.40. |
| A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service. |
| MyBB is free and open source forum software. Prior to 1.8.40, the Contact module does not validate a redirect URL or protocol correctly, resulting in an open redirect and reflected JavaScript code injection. contact.php accepts the redirect target from the from HTTP parameter in $mybb->input['from'] or the Referer HTTP header in $_SERVER['HTTP_REFERER'] and passes it to redirect() without sufficient verification. A javascript: URI becomes the target of the `Click here if you don't want to wait any longer` link because $force_redirect is true, allowing script execution when a victim selects the link. This issue is fixed in version 1.8.40. |
| Trilium Notes is a cross-platform, hierarchical note taking application focused on building large personal knowledge bases. Prior to 0.103.0, the #iconClass label value is returned raw by getNoteIcon() and inserted without HTML attribute encoding into class attributes in apps/client/src/widgets/quick_search.ts and apps/client/src/services/note_autocomplete.ts, allowing a stored payload to execute automatically when a victim opens a new tab or uses Ctrl+J and, because Electron enables nodeIntegration and disables contextIsolation, run operating-system commands as the victim. This issue is fixed in version 0.103.0. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 is vulnerable to a denial of service attack. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo()
amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo()
callback while holding xdna->dev_lock.
The callback may call amdxdna_cmd_submit(), which in turn calls
amdxdna_pm_resume_get(). If the device is suspended,
amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(),
which also acquires xdna->dev_lock, resulting in a deadlock.
Avoid the deadlock by calling amdxdna_pm_resume_get() before holding
xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and
amdxdna_drm_config_hwctx_ioctl() |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fail attrlist updates when the superblock is inactive
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
