| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and
passes it to i2c_smbus_read_block_data() to retrieve the 4-byte
BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour
caller buffer sizes -- it memcpy()s data.block[0] bytes from the
SMBus transaction (where data.block[0] is the length byte returned by
the slave device, up to I2C_SMBUS_BLOCK_MAX = 32):
memcpy(values, &data.block[1], data.block[0]);
If the device returns any block length above 5, the call overflows
the caller's 5-byte stack buffer before the post-call
if (ret != 4)
return -EIO;
check has a chance to reject the response.
Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room
for any well-formed SMBus block response, matching the convention used
by the other i2c_smbus_read_block_data() callers in this driver. |
| SurrealDB before 2.2.2 with scripting enabled fails to properly enforce recursion limits when native functions contain embedded JavaScript that issues new queries. Authenticated attackers can bypass the recursion limit by chaining native and JavaScript function calls to trigger infinite recursion and exhaust server memory. |
| Always-incorrect control flow implementation in some firmware for some Intel(R) Xeon(R) processors may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| In sshd in OpenSSH before 10.5, the restrict keyword (in authorized_keys) was supposed to be applicable to tunnel forwarding but was not. |
| IBM Db2 Genius Hub 1.1, 1.1.1, 1.1.2 and IBM Agentics 1.0 could allow an attacker to execute arbitrary code or obtain sensitive information due to the use of dangerous functions without sufficient restrictions. |
| Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async
[Why&How]
dc_process_dmub_aux_transfer_async() copies payload->length bytes into a
16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which
is a no-op in release builds. If a caller ever passes length > 16 this
results in a stack buffer overflow via memcpy.
Additionally, link_index is used to dereference dc->links[] without
bounds checking against dc->link_count, risking an out-of-bounds access.
Replace the ASSERT with a hard runtime check that returns false when
payload->length exceeds the destination buffer size, and add a bounds
check for link_index before it is used.
(cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, XhtmlParser.java imposes no maximum element nesting depth, so a deeply nested text.div narrative triggers unbounded recursion between parseElementInner() and parseElement(), raising a StackOverflowError. An attacker who can submit FHIR resources containing such narratives can thus crash a parsing or validation worker thread, affecting validator services and any application that parses attacker-supplied FHIR JSON or XML. This issue is fixed in version 6.9.11. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Proton-Dotnet through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue |
| In Apache CXF's DefaultEncryptingOAuthDataProvider, revoked access tokens still decrypt successfully, and TokenIntrospectionService reports active:true. The same applies to refresh tokens. This violates the RFC stipulations that 'The authorization server MUST invalidate the token.' and 'introspection of a revoked token MUST return {"active":false}'. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| A bug in APR-util version 1.6.3 (and earlier) allows a stack recursion attack against any library consumer which parses XML from untrusted sources and uses the apr_xml_quote_elem() function.
Users are recommended to upgrade to version 1.6.4, which fixes this issue. |
| The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was ((length/hop/source/target checks) && (icmp_hdr->code != 0)). Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated length is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet. |
| ** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| Misskey is an open source, federated social media platform. IVersions 8.63.0 and later, but prior to 2026.5.4, contain a vulnerability that can cause the Misskey web client to slow down or crash when it applies a malformed theme. This issue has been fixed in version 2026.5.4. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid ProtonJ2: through 1.1.0.
Users are recommended to upgrade to version 1.2.0, which fixes the issue. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| When an Expat parser with a registered ElementDeclHandler parses an inline
document type definition containing a deeply nested content model a C stack
overflow occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: fix releasing a faulty array block twice in dm_array_cursor_end
When dm_bm_read_lock() fails due to locking or checksum errors, it
releases the faulty block implicitly while leaving an invalid output
pointer behind. The caller of dm_bm_read_lock() should not operate on
this invalid dm_block pointer, or it will lead to undefined result.
For example, the dm_array_cursor incorrectly caches the invalid pointer
on reading a faulty array block, causing a double release in
dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put().
Reproduce steps:
1. initialize a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. wipe the second array block offline
dmsteup remove cache cmeta cdata corig
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try reopen the cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc $262144"
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
device-mapper: array: array_block_check failed: blocknr 0 != wanted 10
device-mapper: block manager: array validator check failed for block 10
device-mapper: array: get_ablock failed
device-mapper: cache metadata: dm_array_cursor_next for mapping failed
------------[ cut here ]------------
kernel BUG at drivers/md/dm-bufio.c:638!
Fix by setting the cached block pointer to NULL on errors.
In addition to the reproducer described above, this fix can be
verified using the "array_cursor/damaged" test in dm-unit:
dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> |
