| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: avoid divide by zero in fib_rebalance
fib_rebalance() computes the total eligible nexthop weight in one pass
and programs upper bounds in a second pass. A concurrent change to
ignore_routes_with_linkdown can make the first pass return zero while
the second pass sees an eligible nexthop, resulting in division by zero.
If the first pass reports a zero total, set each nexthop upper bound to
-1 and skip the division. This matches the IPv6 fix in commit
d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance")
and preserves the lock-free rebalance path. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Connected Devices Platform Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs_setattr_size() updates i_size and resizes the on-disk attribute
without holding mapping->invalidate_lock. Page faults take the lock
shared, so a fault racing the resize can resolve a VCN against the
transient runlist state of ntfs_non_resident_attr_expand() and fail
with a spurious SIGBUS, and can interleave with the size-change
epilogue (truncate_pagecache(), i_size_write(),
pagecache_isize_extended()).
Take invalidate_lock exclusively around the whole resize after
inode_dio_wait(), matching the fallocate path and other filesystems
such as xfs, which wraps truncate in its mmaplock (= invalidate_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix data race and NULL deref on local->assoc_dev
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion. |
| Use after free in Windows Ancillary Function Driver for WinSock allows an authorized attacker to disclose information locally. |
| Race condition in the IPC component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock versions from 4.1.0 can reuse a stale observation when an attacker pre-dates and removes its own marker, at least two lock-user processes are waiting, coarse or matching modification times preserve the observation, and an honest contender creates a fresh marker on the reused inode, causing that live marker to be removed as stale. This issue is fixed in version 4.2.1. |
| filelock is a platform-independent file lock for Python. Prior to 4.2.1, UnixFileLock can truncate a regular file renamed onto the lock path when another local user has actual rename permission, or hard-linked there under a permissive hard-link policy; when an explicit mode is requested, affected versions from 3.10.2 can also change that file's mode. This issue is fixed in version 4.2.1. |
| Use after free in Windows Kernel-Mode Drivers allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Win32K allows an authorized attacker to elevate privileges locally. |
| A time-of-check time-of-use (TOCTOU) race condition combined with improper symbolic link handling in the privileged helper of TeamViewer Full Client and Host prior to version 15.83 for macOS allows a local attacker with low privileges to bypass installer package verification and install a malicious package. Successful exploitation can lead to local privilege escalation to root. |
| A security vulnerability has been detected in a2aproject a2a-java up to 1.2.0.Final. This impacts the function TaskManager.saveTaskEvent. The manipulation leads to race condition. The attack may be initiated remotely. Upgrading to version 1.3.0.Final will fix this issue. The identifier of the patch is 6b8e1e085c35e970ef0048901cd25850e4791ec2. The affected component should be upgraded. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: serialize vblank counter reads against GPU reset
The vblank counter callback reads display registers and scanout
position without holding reset_domain->sem. During GPU recovery,
display commit work can call the callback while reset owns the
semaphore for writing. The hardware access then triggers the
lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets
TAINT_WARN when lockdep is enabled.
Try to acquire the reset semaphore for reading before accessing the
hardware, and hold it across the counter and scanout-position reads.
If reset is already in progress, return DRM's cached software vblank
count instead. This avoids blocking behind reset and avoids accessing
display hardware while it is being reset.
The cached count is less accurate than the hardware count, but is
used only when reset prevents a safe hardware read. This addresses
the reset-time warning from this vblank path; it does not suppress or
fix unrelated lockdep warnings.
(cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: destroy topsrv workqueues before closing connections
tipc_topsrv_stop() closed subscriber connections while the topology
server's send and receive workqueues were still running. Socket
callbacks and subscription events could then queue more work, and
in-flight send/recv work could drop the last connection reference
during the conn_idr walk.
That race produced several teardown failures: refcount_t addition on
0 from conn_get() on a connection whose release was blocked on
idr_lock, a subsequent use-after-free in tipc_conn_close(),
queue_work() on an already destroyed workqueue from the listener
data-ready callback, and an RCU stall in tipc_topsrv_exit_net()
while the walk spun under idr_lock.
Clear srv->listener under idr_lock so it acts as a shutdown flag,
skip queue_work() once it is NULL, destroy the workqueues to flush
in-flight work, and only then close the remaining connections.
Refuse tipc_conn_lookup() after that flag is cleared, and drop
idr_lock when the teardown walk finds no connection, so an
in-flight subscription event cannot pin idr_in_use while the
walk holds the lock.
v3 supersedes the narrower in-thread diff Tung Quang Nguyen
posted on 2026-09-23. It keeps his teardown order and adds the
lookup refusal and the empty-idr unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: noise: reject response consumption after intermediate initiation
Two threads begin processing the identical response message, received
twice. The first thread, A, runs. While it's running, the second one,
B, gets partway through, and during that slow calculation, or even while
blocking on down_write(), A completes and then also a handshake
initiation that's already been queued up runs in thread C, which itself
takes that same down_write(). The handshake initiation creation
succeeds, and sets the state back to waiting-for-response, and calls
up_write(), at which point thread B resumes, because either its finished
its calculations or was finally allowed to acquire down_write(). Thread
B then copies the state back to the peer, and begins a new session,
using that state, which is the same session as the one made in thread A.
Thread A Thread B Thread C
down_read()
sA = handshake->state
memcpy(cA, handshake->crypto)
up_read()
if (sA != 1)
goto fail
slow_crypto(cA)
down_read()
sB = handshake->state
memcpy(cB, handshake->crypto)
up_read()
if (sB != 1)
goto fail
slow_crypto(cB)
down_write()
if (sA != handshake->state)
goto fail
memcpy(handshake->crypto, cA)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
down_write()
slow_crypto(handshake->crypto)
handshake->state = 1
up_write()
down_write()
if (sB != handshake->state)
goto fail
memcpy(handshake->crypto, cB)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
This seems basically impossible to hit in a meaningful way in practice,
but ensure that it absolutely cannot happen by comparing the ephemeral
private key that's on the stack with the latest one that the peer's
handshake state has. |
| Electrum before 4.7.2 contains a spending limit bypass vulnerability in the Nostr Wallet Connect plugin that allows malicious NWC clients to exceed daily_limit_sat by exploiting non-atomic budget checks and millisatoshi truncation. Attackers can send concurrent pay_invoice requests that pass budget_allows_spend() before add_to_budget() runs, or repeatedly pay msat amounts that are floored to whole satoshis, to drain funds beyond the limit. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An attacker may tamper with code-signed applications to execute arbitrary code in the application's context. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock. |
