| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overflow of jump offset in constant blinding
bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into:
AX = imm ^ rnd
AX ^= rnd
if rX op AX goto off
and subtracts 2 from off when the jump is backward. off is s16, so
-32767 and -32768 wrap and the jump goes 32767 insns forward, past the
end of the prog. The jump is inside the patch, hence bpf_adj_branches()
doesn't check it. The kernel crashes when such prog runs with
bpf_jit_harden=2.
Return -ERANGE in such case. bpf_jit_blind_constants() fails the same
way when blinding of other insns moves a jump out of range. |
| smpeg through 2.0.0 contains an integer underflow vulnerability in stream_header() in MPEGsystem.cpp that allows attackers to wrap packet_size by declaring an undersized packet length. Attackers can supply a crafted MPEG file opened via SMPEG_new, SMPEG_new_rwops or SMPEG_new_data to trigger a reachable assertion or out-of-bounds copy, crashing the application. |
| Integer underflow (wrap or wraparound) in DNS Server allows an unauthorized attacker to execute code over a network. |
| An integer underflow in OpenVPN version 2.7_alpha3 through 2.7.7 on Windows and Android allows remote authenticated servers to cause a denial of service or memory disclosure via crafted domain search options |
| FreeRDP before 3.32.0 contains a divide-by-zero vulnerability in the freerdp-shadow-cli shadow server: the frame id in a client's Frame Acknowledge PDU is stored without a range check, so the in-flight frame count in shadow_encoder_inflight_frames() can underflow. An authenticated client can acknowledge a frame id one greater than the last frame sent, causing shadow_encoder_create_frame_id() to divide by zero (SIGFPE) and terminate the process, disconnecting all viewers. |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255.
Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array.
The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact.
The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. |
| ExtUtils::Typemaps::STL::Vector versions before 1.05 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion. |
| Integer underflow (wrap or wraparound) in Microsoft Bluetooth Driver allows an authorized attacker to elevate privileges over an adjacent network. |
| `_nx_secure_x509_parse_signature_data` computes the certificate signature's length as `tlv_length - 1` without first checking that `tlv_length` is non-zero. A certificate whose signature is an empty ASN.1 BIT STRING therefore parses successfully and leaves the certificate holding a signature length of `0xFFFFFFFF` and a signature pointer one byte past the end of the buffer. Certificates are parsed from the peer during the TLS handshake, so the input is remote and unauthenticated. |
| Integer underflow (wrap or wraparound) in Windows NTFS allows an authorized attacker to disclose information locally. |
| An Integer Underflow vulnerability in the kernel of Juniper Networks Junos OS with Extended Echo configured allows an unauthenticated, network-based attacker to cause a denial of service by a kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow
xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by
walking the tail, pages, and head iovecs. Each per-section step
uses min_t() so it never removes more bytes than that section
holds, but the final accounting at the fix_len label subtracts the
total bytes actually consumed from buf->len without any clamp:
fix_len:
buf->len -= (len - trim);
When the caller has set buf->len to a value smaller than the sum
of the iov_lens, (len - trim) can exceed buf->len and the unsigned
subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches
xdr_buf_trim() in exactly that state:
buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip);
xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
buf->len is a small wire-derived value while the iov_lens are at
page scale, so the per-section loops legitimately consume far more
bytes than buf->len records. The wrapped buf->len then propagates
as the authoritative stream bound into every downstream XDR
decoder.
Fix by clamping the decrement so buf->len bottoms out at zero:
buf->len -= min_t(unsigned int, buf->len, len - trim);
On the normal path where the iov_lens sum to buf->len, (len - trim)
is always <= buf->len and the result is identical to before. No
callers change behavior outside the underflow case. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix offset arithmetic in read_chunk_range
svc_rdma_read_chunk_range() walks a Read chunk's segment list to
build a sub-range starting at byte offset and spanning length bytes
for a Position-Zero or Call chunk. Two arithmetic defects in the
per-segment loop produce wrong DMA lengths and a u32 underflow:
pcl_for_each_segment(segment, chunk) {
if (offset > segment->rs_length) {
offset -= segment->rs_length;
continue;
}
dummy.rs_handle = segment->rs_handle;
dummy.rs_length = min_t(u32, length,
segment->rs_length) - offset;
dummy.rs_offset = segment->rs_offset + offset;
First, the skip predicate uses '>' instead of '>='. When offset
equals the segment's full rs_length, the segment is fully consumed
and should be skipped, but the loop falls through into the body.
The resulting dummy.rs_length is min_t(u32, length, rs_length) -
rs_length, which underflows to a near-UINT_MAX u32 when length is
smaller than rs_length, or is zero otherwise.
Second, the length formula subtracts offset from the min_t() result
rather than from segment->rs_length before the cap. For offset > 0
the segment's residual is rs_length - offset, not rs_length, so the
cap must be applied to the residual. With the current bracketing,
whenever length is smaller than rs_length - offset the per-segment
length becomes length - offset instead of length, silently dropping
offset bytes from the rebuilt chunk. Combined with the boundary
case above it also enables the u32 underflow path, which propagates
a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB
kmalloc_array_node() in svc_rdma_get_rw_ctxt().
Additionally, svc_rdma_read_call_chunk() can invoke this function
with length == 0 when the last Read chunk ends exactly at the end
of the Call chunk. With the corrected >= predicate, every segment
is skipped and the function returns the initial -EINVAL, rejecting
a valid request. Return success immediately when length is zero.
Also break out of the loop once length is fully consumed to avoid
passing zero-length segments to svc_rdma_build_read_segment().
Fix by using '>=' so a fully-consumed segment is skipped, by
moving '- offset' inside min_t() so the cap is applied to the
segment's residual length, by returning success for zero-length
requests, and by stopping iteration when the requested range has
been consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix stream->outcnt underflow on duplicate RECONF responses
A cached RECONF chunk may contain more than one request parameter. A
duplicate response can therefore find and process the same ADD_OUT request
again while another parameter is still outstanding, rolling back outcnt
twice and possibly underflowing it.
Track outstanding request types as bits and clear each bit after its first
response. Later responses for the same request are then ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix TFO max_qlen accounting across reuseport migration
A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through
far more pending Fast Open requests than it was configured for.
This only shows up with SO_REUSEPORT listener migration, where closing a
listener hands its still-pending TFO children over to a surviving one.
fastopenq.qlen is charged in tcp_fastopen_create_child() when the child
is created and uncharged in reqsk_fastopen_remove() when the handshake
completes. The uncharge follows rsk_listener of the request the child
points at, and inet_reqsk_clone() has repointed the child at a new
request owned by the new listener, so the ++ and the -- land on two
different sockets. The new listener's qlen drifts negative and its
limit no longer binds.
Charge the new listener during migration, like reqsk_queue_migrated()
already does for queue->young and queue->qlen. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit()
jbd2_journal_initialize_fast_commit() validates journal capacity by
checking (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS).
Both j_last and num_fc_blks are unsigned, so when num_fc_blks exceeds
j_last the subtraction wraps to a large value, bypassing the bounds
check.
The resulting underflow corrupts j_last, j_fc_first, and j_free,
leading to journal abort.
Fix by checking num_fc_blks against j_last before the subtraction,
returning -EFSCORRUPTED. |
| Integer underflow (wrap or wraparound) in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs. |
