| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Kylin. Special parameter in JDBC URL can lead to code injection.
Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of Sensitive Information (system level configuration info) to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Heap buffer overflow in the HLL sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
When deserializing a sketch in LIST mode, from either a byte buffer or a stream, the coupon count was read from the input and used as the number of entries to copy into a fixed buffer of 8 entries, without checking it against the buffer's capacity. A crafted sketch could cause a write of up to 988 bytes past the end of this internal heap buffer. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 1.0.0-incubating before 5.3.0. Only applications that deserialize HLL sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| REST API Mass Assignment vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0, which fixes the issue. |
| OAuth1 Request Replay Attack vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0 which fixes the issue. |
| OAuth1 callback validation vulnerability in Apache Allura.
This issue affects Apache Allura: through 1.21.0.
Users are recommended to upgrade to version 1.22.0, which fixes the issue. |
| Improper Authorization vulnerability in Apache SkyWalking BanyanDB.
The Canopy includes incomplete proof-of-concept role and monitoring-proxy functionality. Under a non-default configuration with a readonly Canopy user and a reachable monitoring target, that user can send non-read requests through the monitoring proxy.
This issue affects Apache SkyWalking BanyanDB: from 0.11.0 before 0.11.1.
Users are recommended to upgrade to version 0.11.1, which fixes the issue. |
| In Apache CXF, the Netty-based HTTP client transport (cxf-rt-transports-http-netty-client) did not verify that the hostname in the server’s TLS certificate matched the host being called. This applied over both HTTP/1.1 and HTTP/2, even when disableCNCheck was left at its default value of false. The certificate chain was validated against the configured trust store, but the endpoint’s identity was not. A network attacker able to intercept traffic could present any certificate trusted by the client, such as a publicly issued certificate for a domain they control, and impersonate the target service. They could then read or modify the exchanged messages, including credentials.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| Improper Verification of Cryptographic Signature vulnerability in Apache CXF's JAX-RS XML Security module. The JAX-RS XML Signature interceptors (XmlSigInHandler, XmlSigInInterceptor and the streaming XmlSecInInterceptor) did not ensure that the XML passed to the application was covered by the signature. An attacker with any document signed by a trusted key could wrap it in unsigned content, which the application would then treat as signed.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| The max_age authentication-freshness check in OidcClientCodeRequestFilter was inoperative due to a milliseconds/seconds unit mismatch and an inverted comparison polarity. Any relying party using setMaxAgeOffset to enforce re-authentication would silently accept sessions of any age, bypassing step-up authentication policies. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| Out-of-bounds read in the VarOpt union deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
var_opt_union::deserialize() read the 32-byte preamble of a non-empty union after checking that only 8 bytes were available, so a truncated serialized union could cause a read of up to 24 bytes past the end of the input. For such inputs, the size remaining for the embedded sketch was also computed by an unsigned subtraction that could wrap around, so the embedded sketch's own size checks no longer limited reads to the input. The bytes read can become part of the deserialized union's state. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize VarOpt unions from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Out-of-bounds read in the compact Theta sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
compact_theta_sketch::deserialize() and wrapped_compact_theta_sketch::wrap() read header fields before checking that the input was long enough. For the compressed format, the size check could be defeated by a 32-bit overflow, and two header fields that control decoding were not validated; this also affected deserialization from a stream. A crafted or truncated sketch could cause a read past the end of the input. In the compressed case the over-read can be large, and the bytes read can become part of the deserialized sketch. This can cause a crash (denial of service) and could expose adjacent memory contents.
This issue affects Apache DataSketches C++: from 3.1.0 before 5.3.0. Only applications that deserialize Theta sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Out-of-bounds read and write in the CPC sketch deserialization of Apache DataSketches C++ (repo: datasketches-cpp).
A crafted serialized CPC sketch passed to cpc_sketch::deserialize(), from either a byte buffer or a stream, can cause the decompressor to read past the end of the compressed data, because the read position was only checked after decoding finished. In the hybrid flavor, it can also cause a write outside an internal heap buffer, because decoded row indices were not validated. Several other header fields and decoded values, including lg_k, were also not validated. This can corrupt heap memory, causing a crash and potentially enabling further exploitation.
This issue affects Apache DataSketches C++: from 2.0.0-incubating before 5.3.0. Only applications that deserialize CPC sketches from untrusted sources are affected.
Users are recommended to upgrade to version 5.3.0, which fixes this issue. |
| Improper input validation vulnerability in Apache Camel Karavan.
When a deployment was started, Karavan unmarshalled a project's `kubernetes.yaml` and applied every resource it contained to the cluster without restricting the resource kinds, without rejecting security-sensitive pod options, and without pinning the target namespace. An authenticated user of any role could therefore have Karavan apply arbitrary Kubernetes resources within the reach of its service account, including pods requesting hostNetwork, hostPID, hostIPC, hostPath volumes, host ports, privileged containers, privilege escalation or added capabilities.
This issue affects Apache Camel Karavan: from 4.0.0 before 4.22.1.
Users are recommended to upgrade to version 4.22.1, which fixes the issue. |
| Improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Apache Camel Karavan.
A project file name supplied through the project file API was used verbatim as a path segment when the project was written to the working copy for a Git commit, so a name containing `../` sequences caused the file content to be written outside the project directory, to any location writable by the Karavan process. An authenticated user of any role could use this to overwrite application configuration or files on the application classpath and so execute code in the Karavan container.
This issue affects Apache Camel Karavan: from 3.18.0 before 4.22.1.
Users are recommended to upgrade to version 4.22.1, which fixes the issue. |
| A flaw was discovered in OpenLDAP before 2.4.57 leading in an assertion failure in slapd in the X.509 DN parsing in decode.c ber_next_element, resulting in denial of service. |
| cyrus-sasl (aka Cyrus SASL) 2.1.27 has an out-of-bounds write leading to unauthenticated remote denial-of-service in OpenLDAP via a malformed LDAP packet. The OpenLDAP crash is ultimately caused by an off-by-one error in _sasl_add_string in common.c in cyrus-sasl. |
