| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| JHipster before v.8.9.0 allows privilege escalation via a modified authorities parameter. Upon registering in the JHipster portal and logging in as a standard user, the authorities parameter in the response from the api/account endpoint contains the value ROLE_USER. By manipulating the authorities parameter and changing its value to ROLE_ADMIN, the privilege is successfully escalated to an Admin level. This allowed the access to all admin-related functionalities in the application. NOTE: this is disputed by the Supplier because there is no privilege escalation in the context of the JHipster backend (the report only demonstrates that, after using JHipster to generate an application, one can make a non-functional admin screen visible in the front end of that application). |
| Use of uninitialized variable for some TDX Module before version tdx1.5 within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper Initialization within the AMD Secure Encrypted Virtualization (SEV) firmware can allow an admin privileged attacker to corrupt RMP covered memory, potentially resulting in loss of guest memory integrity |
| Use of an uninitialized variable in the ASP could allow an attacker to access leftover data from a trusted execution environment (TEE) driver, potentially leading to loss of confidentiality. |
| A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series devices could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the Cisco AnyConnect service on an affected device. To exploit this vulnerability, the attacker must have valid VPN user credentials on the affected device.
This vulnerability exists because a variable is not initialized when an SSL VPN session is established. An attacker could exploit this vulnerability by supplying crafted attributes while establishing an SSL VPN session with an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN sessions and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established.
Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers without manual intervention. |
| A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device.
This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller. |
| Element is a Matrix web client built using the Matrix React SDK. Versions of Element Web and Desktop earlier than 1.11.85 do not check if thumbnails for attachments, stickers and images are coherent. It is possible to add thumbnails to events trigger a file download once clicked. Fixed in element-web 1.11.85. |
| An issue was found in the CPython `zipfile` module affecting versions 3.12.1, 3.11.7, 3.10.13, 3.9.18, and 3.8.18 and prior.
The zipfile module is vulnerable to “quoted-overlap” zip-bombs which exploit the zip format to create a zip-bomb with a high compression ratio. The fixed versions of CPython makes the zipfile module reject zip archives which overlap entries in the archive.
|
| Incomplete cleanup after loading a CPU microcode patch may allow a privileged attacker to degrade the entropy of the RDRAND instruction, potentially resulting in loss of integrity for SEV-SNP guests. |
| The Honeywell Experion PKS contains an Uninitialized Variable in the common Epic Platform Analyzer (EPA) communications. An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which results in a dereferencing of an uninitialized pointer leading to a denial of service.
Honeywell recommends updating to the most recent version of
Honeywell Experion PKS: 520.2 TCU9 HF1and 530.1 TCU3 HF1. The affected Experion PKS products are
C300 PCNT02, EHB, EHPM, ELMM, Classic ENIM, ETN, FIM4, FIM8, PGM, and RFIM. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. |
| Multiple Home GateWay/Hikari Denwa routers provided by NIPPON TELEGRAPH AND TELEPHONE EAST CORPORATION are vulnerable to insufficient access restrictions for Device Setting pages. If this vulnerability is exploited, an attacker who identified WAN-side IPv6 address may access the product's Device Setting page via WAN-side. Note that, the same products are also provided by NIPPON TELEGRAPH AND TELEPHONE WEST CORPORATION, but the vulnerability only affects products subscribed and used in NIPPON TELEGRAPH AND TELEPHONE EAST CORPORATION areas. |
| Dpanel is a Docker visualization panel system which provides complete Docker management functions. The Dpanel service contains a hardcoded JWT secret in its default configuration, allowing attackers to generate valid JWT tokens and compromise the host machine. This security flaw allows attackers to analyze the source code, discover the embedded secret, and craft legitimate JWT tokens. By forging these tokens, an attacker can successfully bypass authentication mechanisms, impersonate privileged users, and gain unauthorized administrative access. Consequently, this enables full control over the host machine, potentially leading to severe consequences such as sensitive data exposure, unauthorized command execution, privilege escalation, or further lateral movement within the network environment. This issue is patched in version 1.6.1. A workaround for this vulnerability involves replacing the hardcoded secret with a securely generated value and load it from secure configuration storage. |
| Heap-based Buffer Overflow and Uninitialized Variable vulnerabilities exist in the X_B and SAT file reading procedure in eDrawings from Release SOLIDWORKS 2024 through Release SOLIDWORKS 2025. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted X_B or SAT file. |
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024.
These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. |
| NVIDIA Unified Memory driver for Linux contains a vulnerability where an attacker could leak uninitialized memory. A successful exploit of this vulnerability might lead to information disclosure. |
| User Interface (UI) Misrepresentation of Critical Information vulnerability in DocuSeal allows Content Spoofing.Displayed version does not show the layer flattened version, once download, If printed (e.g. via Google Chrome -> Examine the print preview): Will render the vulnerability only, not all layers are flattened.
This issue affects DocuSeal: through 1.8.1, >1.8.1. |
| User Interface (UI) Misrepresentation of Critical Information vulnerability in DocuSign allows Content Spoofing.
1. Displayed version does not show the layer flattened version, which is provided when the "Print" option is used.
2. Displayed version does not show the layer flattened version, which is provided when the combined download option is used.
3. Displayed version does not show the layer flattened version, which is also the provided version when downloading the result in the uncombined option.
Once download, If printed (e.g. via Google Chrome -> Examine the print preview): Will render the vulnerability only, not all layers are flattened.
This issue affects DocuSign: through 2024-12-04. |
| User Interface (UI) Misrepresentation of Critical Information vulnerability in Documenso allows Content Spoofing.Displayed version does not show the layer flattened version, once download, If printed (e.g. via Google Chrome -> Examine the print preview): Will render the vulnerability only, not all layers are flattened.
This issue affects Documenso: through 1.8.0, >1.8.0 and Documenso SaaS (Hosted) as of 2024-12-05. |
| User Interface (UI) Misrepresentation of Critical Information vulnerability in DropBox Sign(HelloSign) allows Content Spoofing.
Displayed version does not show the layer flattened version, once download, If printed (e.g. via Google Chrome -> Examine the print preview): Will render the vulnerability only, not all layers are flattened.
This issue affects DropBox Sign(HelloSign): through 2024-12-04. |
| The Kolide Agent (aka: Launcher) is the lightweight agent designed to work with Kolide's service. An implementation bug in the Kolide Agent (known as `launcher`) allows for local privilege escalation to the SYSTEM user on Windows 10 and 11. The bug was introduced in version 1.5.3 when launcher started storing upgraded binaries in the ProgramData directory. This move to the new directory meant the launcher root directory inherited default permissions that are not as strict as the previous location. These incorrect default permissions in conjunction with an omitted SystemDrive environmental variable (when launcher starts osqueryd), allows a malicious actor with access to the local Windows device to successfully place an arbitrary DLL into the osqueryd process's search path. Under some circumstances, this DLL will be executed when osqueryd performs a WMI query. This combination of events could then allow the attacker to escalate their privileges to SYSTEM. Impacted versions include versions >= 1.5.3 and the fix has been released in 1.12.3. |
