| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing authorization in the REST role-management routes of Progressive Robot hMailServer 6.3.4 through 6.3.6 allows a remote authenticated user whose credential is confined to named domains to modify a custom role that accounts in other domains hold, and to create custom roles and delete any that no account holds. The routes that create, update and delete a custom role require the manage_roles permission, which only the serveradmin role holds; but a full-scope API key issued for named domains, and serveradmin assigned with a domain list, are serveradmin confined to those domains and hold manage_roles. The server's authorization gate did not refuse the three role routes to a confined credential and the route named no domain, so a credential issued to one tenant could raise or lower the permissions of a custom role assigned across other tenants - granting another domain's role every permission over its mailboxes and settings, or removing what it needs. A custom role may not hold administer_server, administer_domain or manage_roles, so the confined credential cannot make itself or another a server administrator by creating or rewriting a custom role. |
| Incorrect authorization in the Sender Rewriting Scheme (SRS) of Progressive Robot hMailServer 6.2.1 through 6.3.6 allows a remote attacker to relay mail through the server to outside addresses. With SRS enabled, the server rewrites the envelope sender of mail it forwards to a signed SRS address at the forwarding domain, and passes a bounce to that address back to the original sender; but it took every message to a valid SRS address, whatever its sender, as delivery to a local recipient, so the relay rules and the SMTP authentication they require were not applied, and the message was delivered to the outside address the SRS address encodes. Anyone holding a valid SRS address of the server, such as the recipient of a forwarded message, could have the server relay mail to the address it encodes for 21 days, and an account holder whose account forwards to an outside mailbox could obtain one for any address. SRS is off by default. |
| By permanently omitting the final control-response line, a malicious FTP,
IMAP, POP3, or SMTP server can exploit libcurl and completely bypass its
configured transfer timeout mechanism, indefinitely blocking all concurrent
transfers bound to the same multi-handle. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to access sensitive user data. |
| Subscriber Broken Access Control in LearnPress <= 4.4.10 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix UAF in ovl_do_mkdir() debug print
ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir().
Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on
failure."), vfs_mkdir() calls end_creating() on the input dentry on
failure and may replace it on success, so the post-call %pd can
use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled.
Print the dentry before the call and only the result afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Build the cid tables privately and publish them with RCU
The cid tables are visible to the cid kfuncs while being modified: the
first enable publishes the global pointers before filling them,
ops.init_cids() overrides rewrite them in place, and re-enables rebuild
them in place. A racing TRACING or SYSCALL program can read unfilled
entries, including uninitialized memory in the kmalloc'd tables, or torn
topo updates.
Tie the tables' lifetimes to the root sched instead: each root enable
builds a fresh set privately and publishes the per-table __rcu globals once
the layout is final, and root disable unpublishes and RCU-frees the set. A
non-NULL global is now always a fully built table which stays valid for the
reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as
no-mapping, also after the scheduler exits instead of reporting the stale
last mapping.
The cid kfuncs are available whether the root scheduler is cid-form or
cpu-form, the latter to allow gradual migration to cids. Every root
therefore builds and publishes a default mapping.
Every reader must either be gated on scheduler liveness or NULL-check
inside an RCU read section. Fix the two kfuncs that were neither:
scx_bpf_this_cid() read the table with no RCU or preemption protection and
scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program
in an RCU read section. The hotplug callbacks are instead serialized by
retiring the tables inside the cpus_read_lock() section that clears
scx_root.
v2: Document why every root builds the tables (desc + cid.c comment). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Disable the V3D interrupt across runtime suspend
vc4_irq_disable() masks the V3D interrupt sources and then calls
synchronize_irq() before the V3D is powered down. However, by itself,
this is not enough to quiesce the interrupt handler.
synchronize_irq() waits for handlers that have already set
IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE.
A GIC interrupt chip is able to mark an interrupt active as soon as a
CPU acknowledges it, so there these checks cover the whole dispatch path.
On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no
active state. A CPU that has read the hwirq out of the pending register
but has not yet reached handle_level_irq() stays invisible to
synchronize_irq().
During a power transition, vc4_irq() may therefore run after the power
domain is off, where every V3D register read will return 0xdeadbeef.
0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't
trigger NULL pointer dereference issues only because the functions
vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early
when there is no job pointer, but OUTOMEM is still able to schedule
vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it.
Therefore, fix the spurious interrupts by disabling the interrupt line
across the PM transition. To preserve the enable/disable balance, move
vc4_irq_install() and request the IRQ line disabled before the first
runtime resume. |
| A type confusion issue was addressed with improved checks. This issue is fixed in iOS 27.2 and iPadOS 27.2. An app may be able to access sensitive user data. |
| This issue was addressed with additional entitlement checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2, watchOS 27.2. An app may be able to access sensitive user data. |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27, macOS Tahoe 26.7.2. An app may be able to access sensitive user data. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| SiYuan's development branch (endpoint introduced by commit 9b8e8956f, not present in v3.7.3 or master, patched in v3.7.4-alpha.3) contains a missing-authorization vulnerability in the /api/av/getAttributeViewSearchTarget endpoint. The route is registered with CheckAuth only and performs no authorization checks (no CheckReadonly, no publish-access or encrypted-notebook gating). Given a database identifier taken from a published page and a keyword, an anonymous reader can query the endpoint to retrieve matching database row content, including rows that publish filters (FilterAttributeViewByPublishAccess) would otherwise withhold. No released stable version is affected. |
| The Flex Objects plugin (through 1.4.6, tested with Grav 2.0.11) contains an incorrect authorization vulnerability in its Flex Objects API. FlexApiController::update() checks only the general Flex directory permission and does not apply the additional target/field/super-admin checks enforced by the dedicated Users and Groups API controllers. An authenticated account with api.access, admin.login, and users.update permissions (but without api.users.write or admin.super) can use the generic /api/v1/flex-objects/user-accounts endpoint to change a super administrator's password, or the /api/v1/flex-objects/user-groups endpoint to grant its group admin.super, resulting in full site takeover. Fixed in Flex Objects 1.4.7. |
