| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: hold a connection reference for each session channel
ksmbd_session_unregister() removes a session from the global and per-
connection tables before dropping the table reference. A concurrent
reference holder can keep the session and its channel list alive after
those removals.
Connection cleanup can no longer find the unpublished session to remove its
channels. Since a channel only stores a raw conn pointer, the connection
can be freed while another session reference holder is still accessing it,
for example during SMB3.1.1 binding or a procfs read.
Take a connection reference when registering a channel and release it on
insertion failure, channel removal, or final session destruction. Keep the
channels and signing keys until the session is destroyed so a response can
still be signed after the session has been unregistered. |
| Vikunja before 2.7.1 contains a supply chain vulnerability in its mage release targets that fetch the xgo module and Docker image by mutable latest references. Attackers who compromise the upstream xgo module, image, or registry can inject malicious code into subsequently built release binaries shipped under a valid signature. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: drain session procfs readers before dropping table references
Session registration failure and connection cleanup can drop the table
reference while the per-session procfs entry is still accessible. If a
reader holds the last remaining reference, its final put calls
proc_remove() from its own callback and waits for that callback to
finish.
Remove the procfs entry before dropping the table reference in the
registration failure path. Queue sessions removed during connection
cleanup and drain their procfs readers after releasing both session
locks, then return their table references. Keep the global hash node
unhashed while a session is queued so a concurrent unregister cannot
drop the reference again.
Previous-session replacement also destroys the file table before the
session is finally freed. Detach the idr under the lock used by procfs
file counters, and report zero files after it has been detached. This
prevents a reader from accessing the idr during or after its
destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: Require CAP_NET_ADMIN to attach to an ownerless device
Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN
in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap
devices.")
The idea was to allow the permissions on /dev/net/tun to be relaxed to
0666 and thus allow owners of tun devices assigned with TUNSETOWNER to
actually open it and get at their devices.
What we missed at the time was that persistent devices with *no* owner
were already essentially world-consumable, and anyone who could open
the device node could also attach to those.
Even then, using persistent devices with no explicitly set owner — on
the (false) presumption that CAP_NET_ADMIN would be required to open
them — wasn't an egregious userspace bug. There are cases where it does
make sense to separate the creation/configuration of the netdevice, from
the process which shovels packets into it.
Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e
("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message
noted that if both uid and gid are set, both have to match (in itself a
bizarre choice) — but still not that with *neither* set, no permission
at all was required.
Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed
new queues to be attached to a device from the moment of its creation,
with no way for userspace to close the race between creation and a
subsequent TUNSET{OWNER,GROUP}.
In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried
to fix things to be saner: only require the user *or* the group to
match, in line with standard POSIX permissions, and require
CAP_NET_ADMIN if neither the user nor group authorised the access
(although it put the CAP_NET_ADMIN check first, and would wrongly have
reported the capability as having been used even when it was not).
That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group
permission check") due to allegedly causing a regression in an selinux
test suite which *expected* the attachment to succeed when authorised
by none of user, group, nor CAP_NET_ADMIN:
https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
We should not break UAPI. But we don't have to consider an selinux test
case which deliberately exercises a security flaw to be UAPI worth
preserving either. To which end, I have fixed it in selinux-testsuite
commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the
relabel tests").
So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been
assigned an owner or group, while leaving the weird tun ownership model
as it was (user *and* group have to match, if both are set). If someone
still wants to fix the latter (which wasn't actually the reason the
previous attempt was reverted), they can do it under separate cover.
Permit attaching to an existing device only if an owner and/or group was
set and the caller matches all that were set, or if the caller has
CAP_NET_ADMIN. The only behavioural change is that a device with no
owner or group now requires CAP_NET_ADMIN to attach — precisely the
loophole we want to close.
And put the CAP_NET_ADMIN check in the right place this time. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: fix use-after-free on lower qdisc drop
The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return
value against NETDEV_TX_OK alone. A slave that consumes the skb but
returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated
as if the skb were still owned, so the loop restores skb->dev and calls
__skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit()
from its ndo_start_xmit() (propagated since cbbef5e18307), and when the
lower qdisc drops the packet that value is NET_XMIT_DROP after the skb
has been freed, giving a use-after-free in teql_master_xmit().
The Fix: test for consumption with dev_xmit_complete(), which accepts
NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that
need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps
the packet counted in tx_packets/tx_bytes and advances the slave; a
consumed result that is neither a success nor NET_XMIT_CN ends the
attempt and is charged to tx_dropped, so lower-qdisc drops are no longer
reported as good transmits. NET_XMIT_CN is counted like success because
it can accompany acceptance of the current packet: pfifo_head_drop drops
the old head, enqueues the current skb and returns NET_XMIT_CN.
Conditions to recreate the bug:
With CONFIG_NET_SCH_TEQL,
CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and
lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0
and a teql0 root on lkrvlan0; bring teql0 up with an address and send one
UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower
qdisc while holding a freed skb. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST
matches exact sequence") keeps an established conntrack entry in
ESTABLISHED when an in-window RST does not match the expected sequence
number exactly, so the endpoint can validate the RST with a challenge
ACK.
The timeout selection nevertheless uses the CLOSE timeout for every RST
packet. The bug is that timeout selection is based on the packet type,
not on the state transition result: even when RST validation keeps
new_state in ESTABLISHED, the timeout is still forced to
TCP_CONNTRACK_CLOSE.
Linux TCP independently rate limits challenge ACKs per socket. A second
non-exact RST can therefore arrive after the first challenge ACK has
restored the timeout but before the rate limit expires. The second RST
lowers the timeout to 10 seconds again while the endpoint suppresses the
second challenge ACK, allowing the conntrack entry to expire while both
TCP endpoints remain established.
Using the ESTABLISHED timeout for such RSTs would avoid this short
expiration window, but it could also retain stale entries for the
five-day default because conntrack cannot reliably match the endpoint's
exact TCP state.
Use the UNACK timeout for RST packets that leave the conntrack entry in
TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet
trains still fall through to timeouts[new_state], which preserves the
CLOSE timeout when conntrack accepts the RST as closing the flow.
This avoids the aggressive 10-second expiration window for non-exact
RSTs while preserving the short timeout for RSTs that conntrack accepts
as closing the flow. |
| imgproxy 3.3.0 before 4.0.17 contains an out-of-bounds heap read and write in the ICO loader's BMP header reconstruction (vips_foreign_load_ico_header in vips/icoload.c) when an ICO entry declares a tiny data size, causing unvalidated header fields to be read and written past the allocated buffer. Unauthenticated remote attackers can supply a crafted ICO image to corrupt adjacent heap chunk metadata, triggering a glibc abort that crashes the worker. |
| Rustls from 0.23.13 before 0.23.45 accepts TLS 1.3 handshake messages at the wrong encryption level when they follow a key-changing message in the same record, because Deframer::aligned does not enforce RFC 8446 record-boundary alignment. A peer or on-path attacker can pack a plaintext EncryptedExtensions with the ServerHello, which rustls accepts unencrypted. |
| rustls 0.23.44 and 0.23.45 contain an information disclosure vulnerability that sends application data buffered before the handshake completes to the client-facing server when Encrypted Client Hello is rejected. Because start_traffic() queues plaintext from ClientConnection::writer() before sending the ech_required alert, the authenticated public_name server receives data intended for the inner server. |
| rustls before 0.23.46 contains a key exchange downgrade vulnerability that allows network attackers to poison the per-server-name key-exchange group record via an unauthenticated ServerHello. Attackers can answer one connection with a ServerHello selecting X25519, causing later ClientHellos to send only classical shares and lose post-quantum confidentiality. |
| rustls before 0.23.46 contains an uncontrolled memory allocation flaw in its optional Brotli certificate decompression, which limits decompressed output size but accepts an input-selected large history window. Malicious peers can send a certificate with a five-byte Brotli header requesting up to 1 GiB before authentication, aborting Brotli-enabled clients or client-authenticating servers whose allocator cannot satisfy the request. |
| Rustls before 0.23.46 and 0.24.0-dev.1 before 0.24.0-dev.2 contains an information disclosure vulnerability where derived Debug formatting of client session values exposes secret key material. Custom ClientSessionStore implementations that log Tls12ClientSessionValue or Tls13ClientSessionValue can leak TLS 1.2 master secrets or TLS 1.3 resumption PSKs to log readers. |
| Hickory DNS hickory-proto from 0.3.1 before 0.26.1 contains a denial of service vulnerability in BinEncoder that allows remote attackers to exhaust CPU through quadratic-time name compression. Attackers can send malicious DNS messages with many records that add many candidate labels and trigger repeated linear scans during encoding, amplifying CPU exhaustion. |
| Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds. |
| The hickory-dns recursor in hickory-recursor 0.25.0-alpha.3 through 0.25.2 and hickory-resolver 0.26.0-alpha.1 before 0.26.2 iterates every out-of-bailiwick NS target lacking glue in a referral without any per-query work budget. Remote attackers can serve such referrals to force A and AAAA lookups per target, amplifying traffic against remote servers or exhausting recursor resources. |
| Hickory DNS hickory-proto 0.1 through 0.25.0-alpha.3 and hickory-net before 0.26.2 contain a DNSSEC validation bypass because the validator verifies an RRSIG against the DNSKEY of whatever name appears in its Signer's Name field without checking that this name is the zone containing the RRset. Attackers controlling any secure zone can produce valid signatures over arbitrary records in unrelated zones, which resolvers, recursors, and clients using DnssecDnsHandle accept as authenticated. |
| Hickory DNS hickory-resolver 0.26.0-beta.1 before 0.26.2 contains an unbounded retry loop in NameServerPool::try_send, which re-queues truncated (TC) responses without checking the answering transport or counting iterations. A malicious authoritative server returning TC=1 on every transport keeps the resolver spinning on a persistent TCP connection until the 5-second request deadline expires, causing resource exhaustion. |
| hickory-proto and hickory-resolver 0.26.0 before 0.26.2, hickory-server 0.25.0-alpha.1 before 0.26.2, and hickory-recursor 0.25.0-alpha.3 through 0.26.0-alpha.1 fail to canonicalize IPv4-mapped IPv6 addresses when checking deny_answers, deny_server, or AccessControlSet rules. Attackers can use IPv4-mapped addresses to evade answer filtering, trigger queries to denied nameservers, or reach hickory-server library deployments on dual-stack IPv6 sockets from denied clients. |
| The Hickory DNS recursor in all versions of hickory-recursor and in hickory-resolver 0.26.0-beta.1 before 0.26.2 (recursor feature) is vulnerable to ghost domain names attacks because it reuses child-side apex NS RRsets cached from zone NS queries for iterative resolution. By repeatedly querying a zone's NS records, an attacker keeps the stale RRset cached indefinitely, letting name servers whose delegation the parent revoked keep answering for the zone. |
