| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component.
The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source. |
| Deserialization of Untrusted Data vulnerability in Apache Camel.
The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository).
This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**). |
| Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.
The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. |
| Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client.
The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally.
This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names. |
| Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. |
| Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. |
| Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish. |
| Camel-CXF and Camel-Knative Message Header Injection via Missing Inbound Filtering
The CXF and Knative HeaderFilterStrategy implementations (CxfRsHeaderFilterStrategy in camel-cxf-rest, CxfHeaderFilterStrategy in camel-cxf-transport, and KnativeHttpHeaderFilterStrategy in camel-knative-http) only filter outbound Camel-internal headers via setOutFilterStartsWith, while not configuring inbound filtering via setInFilterStartsWith. As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelExecCommandExecutable, CamelFileName) via HTTP requests to CXF-RS or CXF-SOAP endpoints. When a route forwards messages from these endpoints to header-driven components such as camel-exec or camel-file, the injected headers override configured values, enabling remote code execution or arbitrary file writes. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and non-HTTP strategies (CVE-2026-40453).
This issue affects Apache Camel: from 3.18.0 before 4.14.6, from 4.15.0 before 4.18.2.
Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.2. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. |
| Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2. |
| (Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace.
This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1.
Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue. |
| The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. |
| Class org.apache.sshd.server.keyprovider.SimpleGeneratorHostKeyProvider in Apache MINA SSHD <= 2.9.1 uses Java deserialization to load a serialized java.security.PrivateKey. The class is one of several implementations that an implementor using Apache MINA SSHD can choose for loading the host keys of an SSH server. |
| The Camel-PQC FileBasedKeyLifecycleManager class deserializes the contents of `<keyId>.key` files in the configured key directory using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. The cast to `java.security.KeyPair` is evaluated only after `readObject()` has already returned, so any `readObject()` side effects in the deserialized object run before the type check. An attacker who can write to the key directory used by a Camel application — for example through a path traversal into the directory, misconfigured filesystem permissions on the volume where keys are stored, a compromised key provisioning pipeline, or a symlink attack — can place a crafted serialized Java object that, when deserialized during normal key lifecycle operations, results in arbitrary code execution in the context of the application.
This issue affects Apache Camel: from 4.19.0 before 4.20.0, from 4.18.0 before 4.18.2.
Users are recommended to upgrade to version 4.20.0, which fixes the issue by replacing java.io.ObjectInputStream-based key and metadata storage with standard PKCS#8 (private key) / X.509 SubjectPublicKeyInfo (public key) Base64 JSON encoding. For users on the 4.18.x LTS releases stream, upgrade to 4.18.2. |
| The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such as 'CAmelExecCommandExecutable' are filtered out alongside 'CamelExecCommandExecutable'. The same setLowerCase(true) call was not applied to five non-HTTP HeaderFilterStrategy implementations: JmsHeaderFilterStrategy and ClassicJmsHeaderFilterStrategy in camel-jms, SjmsHeaderFilterStrategy in camel-sjms, CoAPHeaderFilterStrategy in camel-coap, and GooglePubsubHeaderFilterStrategy in camel-google-pubsub. Because those strategies use case-sensitive String.startsWith('Camel'/'camel') filtering while the Camel Exchange stores headers in a case-insensitive map, an attacker with JMS (or equivalent) producer access to the broker consumed by a Camel route can inject case-variant Camel internal headers, which are then resolved by downstream components such as camel-exec and camel-file using their canonical casing. This enables remote code execution and arbitrary file write on routes that forward JMS messages to header-driven components.
This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. |
| The camel-mina component's MinaConverter.toObjectInput(IoBuffer) type converter wraps an IoBuffer in a java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. When a Camel route uses camel-mina as a TCP or UDP consumer and requests conversion to ObjectInput (for example via getBody(ObjectInput.class) or @Body ObjectInput), an attacker sending a crafted serialized Java object over the network to the MINA consumer port can trigger arbitrary code execution in the context of the application during readObject().
This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. |
| JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6.
This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. |
| The Camel-Mail component is vulnerable to Camel message header injection. The custom header filter strategy used by the component (MailHeaderFilterStrategy) only filters the 'out' direction via setOutFilterStartsWith, while it does not configure the 'in' direction via setInFilterStartsWith. As a result, when a Camel application consumes mail through camel-mail (for example via from(\"imap://...\") or from(\"pop3://...\")) the inbound filter check is skipped and Camel-prefixed MIME headers are mapped unfiltered into the Exchange. An attacker who can deliver an email to a mailbox monitored by such a consumer can inject Camel-specific headers that, for some Camel components downstream of the mail consumer (such as camel-bean, camel-exec, or camel-sql), can alter the behaviour of the route. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177) and the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891).
This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1.
Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.1. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. |
| When authentication is enabled on the Apache Camel embedded HTTP server or embedded management server (camel-platform-http-main) and a non-root context path such as /api or /admin is configured via camel.server.path or camel.management.path, the BasicAuthenticationConfigurer and JWTAuthenticationConfigurer classes derive the authentication path from properties.getPath() when camel.server.authenticationPath / camel.management.authenticationPath is not explicitly set. Combined with the Vert.x sub-router mounting model - the sub-router is mounted at _path_* and the authentication handler is registered inside the sub-router at the resolved path - this causes the authentication handler to match only the exact configured context path, not its subpaths. Unauthenticated requests to subpaths such as /api/_route_ or /admin/observe/info therefore reach protected business routes and management endpoints without being challenged for credentials. The /observe/info endpoint can disclose runtime metadata such as the user, working directory, home directory, process ID, JVM and operating system information.
This issue affects Apache Camel: from 4.14.1 before 4.14.6, from 4.18.0 before 4.18.2.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, they are suggested to upgrade to 4.14.6. If users are on the 4.18.x LTS releases stream, they are suggested to upgrade to 4.18.2. |
| The camel-infinispan component's ProtoStream-based remote aggregation repository deserializes data read from a remote Infinispan cache using java.io.ObjectInputStream without applying any ObjectInputFilter. An attacker who can write to the Infinispan cache used by a Camel application can inject a crafted serialized Java object that, when read during normal aggregation repository operations such as get or recover, results in arbitrary code execution in the context of the application.
This issue affects Apache Camel: from 4.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-23322 refers to the various commits that resolved the issue, and have more details. This issue follows the same class of vulnerability previously addressed in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747. |
| The ConsulRegistry in the camel-consul component (class org.apache.camel.component.consul.ConsulRegistry and its inner ConsulRegistryUtils.deserialize method) read Java-serialized values from the Consul KV store and passed them to ObjectInputStream.readObject() without configuring an ObjectInputFilter. An attacker who can write to the Consul KV store backing a Camel ConsulRegistry instance could inject a malicious serialized Java object that is deserialized the next time Camel performs a lookup against that registry, leading to arbitrary code execution in the Camel process. The issue mirrors the class of vulnerability already addressed for other Camel components in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747, and was overlooked during the original remediation of those CVEs.
This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1.
Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.1. |
