| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a network attacker who can reach an etcd TLS listener can open many TCP connections and never send a ClientHello. In client/pkg/transport/listener_tls.go, each connection handled by tlsListener.acceptLoop spawns a goroutine that blocks indefinitely inside tls.Conn.Handshake() and remains tracked in the pending map. Unbounded goroutine and map growth can exhaust memory in the etcd process, causing loss of availability for the cluster and, when etcd backs Kubernetes, the control plane. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. |
| Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
| HttpClient based on the classic i/o model fails to correctly release the underlying connection back to the connection manager if it encounters an invalid or unsupported `Content-Encoding` header value in the response message. Please note this defect does not affect HttpClient based on the async i/o model.
This issue affects Apache HttpComponents Client: from 5.0-alpha1 through 5.6.2. |
| Improper neutralization of special elements used in a command ('command injection') in Azure Monitor Agent allows an authorized attacker to elevate privileges over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to improper validation of input size. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, the Notepad++ Windows 11 x64 and ARM64 installer passes the attacker-influenced installation directory `$INSTDIR` from PowerEditor/installer/nppSetup.nsi into a PowerShell `-Command` string used by RegisterMSIX to invoke Add-AppxPackage, allowing PowerShell subexpression syntax such as `$()` in the installation path to execute commands in the installer's security context when the context menu component is selected. This issue is fixed in version 8.9.7. |
| Rekor is a software supply chain transparency log. Starting in version 0.3.0 and prior to version 1.5.2, the `Package.Unmarshal()` function in `pkg/types/alpine/apk.go` decompresses the signature and control gzip members of an APK file into in-memory buffers without bounding the total decompressed size. The existing `max_apk_metadata_size` check (default 1MB) is only applied to individual tar entry header sizes after decompression completes, so it does not prevent a decompression bomb from consuming unbounded heap memory. An attacker can craft a gzip stream that compresses at a ~1000:1 ratio (e.g., 2MB compressed zeros → 2GB decompressed). When submitted as spec.package.content in an Alpine `ProposedEntry`, the server decompresses the full payload into memory during request processing, triggering a fatal Go runtime out-of-memory error or OS OOM-kill that cannot be caught by the server's recover() middleware. This is reachable via two unauthenticated endpoints, `POST /api/v1/log/entries (createLogEntry)` and `POST /api/v1/log/entries/retrieve (searchLogQuery)`. Both invoke `V001Entry.Canonicalize()` → `fetchExternalEntities()` → `apk.Unmarshal(packageData)`, which performs the unbounded decompression. Version 1.5.2 patches the issue. There is no effective workaround. Setting `max_request_body_size` reduces but does not eliminate exposure due to the ~1000:1 compression ratio (a 1MB body limit still allows ~1GB heap allocation). Setting `max_apk_metadata_size` has no effect on this vulnerability since the check is applied after decompression. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: wake sq waiters when the transport closes
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier
In the case that kvm_translate_vncr() races with an MMU notifier the
early return does not release a reference on the faulted in PFN. Add
the necessary call to kvm_release_faultin_page() for the unused PFN. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: fix eth_ports_node leak in probe
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Drop it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: fix pm_runtime leak on mutex_lock failure
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, turnports_allocate_even() in src/apps/relay/turn_ports.c marks the unused odd sibling port as TPS_TAKEN_ODD for an EVEN-PORT Allocate request with reservation bit R=0 even though no RTCP socket will release it, allowing an authenticated client to permanently exhaust the relay port pool and cause subsequent allocations to fail with STUN error 508. This issue is fixed in version 4.17.0. |
| python-socketio is a Python implementation of the Socket.IO realtime client and server. The python-socketio server stores binary `EVENT` and `ACK` messages in memory while it waits to receive their binary attachments. Once all the attachments are received, these messages are then processed. Prior to version 5.16.4, an attacker can submit a binary message and intentionally omit sending one or more of its attachments to cause the message along with the partial list of received attachments to stay in memory for a long time. Version 5.16.4 takes the following measures to address this issue: Binary packets are only accepted from authenticated clients and, when a client disconnects, the server checks if there is a partial binary message being held for the client and deletes it. |
| python-engineio is a Python implementation of the Engine.IO realtime client and server. Prior to version 4.13.2, an attacker can cause the creation of unnecessary background threads in the python-engineio server by exploiting the heartbeat mechanism, which launches a thread when a new connection is received, and when the client sends a PONG packet. This issue primarily affects synchronous servers. Asynchronous servers allocate background tasks instead of physical threads, which are lightweight and less likely to cause denial of service. However, the fix that was implemented was also applied to the asynchronous case. Version 4.13.2 addresses this issue as follows: The initial background thread (or async task( for heartbeat management is only launched if a client passes authentication in the `connect` handler; and the server now ensures that there is only one background heatbeat thread (or async task) per client at a given point in time. Out of sequence PONG packets are now discarded when an active heartbeat thread is already running. |
| OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, in OpenBao's Kerberos auth method on the `GET` handler, or when an `Authorization: Negotiate` header is supplied, the response is includes a `logical.Auth` object in addition to an error message. This results in tokens being created with only the default policy, default TTL, and no entity information, which are hidden by the returned error message. No access to these tokens by the caller occurs and the authentication token is not ever made accessible outside of `sys/raw`. This is fixed in OpenBao v2.5.4. As a workaround, users may set a rate limit quota to limit the creation of these paths. As the path is unauthenticated, it isn't possible to deny access to it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) |
| SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 fails to properly escape table and field names in the command-line export command. An authenticated System User with OWNER or EDITOR roles can create tables or fields with malicious names containing SurrealQL. When a higher-privileged user subsequently imports the exported backup, the injected SurrealQL executes, enabling privilege escalation and root-level takeover of the SurrealDB instance. Applications that let users define custom tables or fields are also exposed to a universal second-order SurrealQL injection even when query parameters are sanitized. |
