| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp i3c: clean up notifier and buses if driver register fails
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made
xe_svm_init() unconditional in xe_vm_create() and extended it to also
initialize a "simple" gpusvm state for non-fault-mode VMs. The matching
xe_svm_fini() call in xe_vm_close_and_put() was updated to run
unconditionally, but the error unwind path in xe_vm_create() was not.
On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has
already succeeded but xe_svm_fini() is only called when
XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves
vm->svm.gpusvm partially initialized and leaks the resources allocated
by drm_gpusvm_init().
For fault-mode VMs, xe_svm_init() additionally acquires the pagemap
owner via drm_pagemap_acquire_owner() and the pagemaps via
xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(),
not xe_svm_fini(). On the same error path, xe_svm_close() is not
called either, so fault-mode VMs leak the pagemap owner and pagemaps.
Fix both leaks:
- Call xe_svm_fini() unconditionally on the err_svm_fini path, matching
the unconditional xe_svm_init() call. Move the vm->size = 0
assignment out of the conditional so the xe_vm_is_closed() assert in
xe_svm_fini() (and xe_svm_close()) holds for both modes.
- Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching
the ordering used in xe_vm_close_and_put().
(cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: publish dpagemap early to avoid device mapping leak on error
drm_gpusvm_get_pages() only stored the local dpagemap into
svm_pages->dpagemap on the success path. If a later page failed (e.g.
-EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap,
svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped
device_unmap() and leaked the device mappings already created.
Assign svm_pages->dpagemap when the first device page is mapped so the
err_unmap path can device_unmap() those mappings.
This issue was found by Sashiko AI review. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user who is authorized to manage maintenance windows could submit a specially crafted, malformed payload that causes the Kibana process to consume excessive resources. Kibana becomes unresponsive for all users and does not recover without manual intervention. |
| A flaw in Elasticsearch allows an authenticated user holding only read privileges to submit a small search request containing a crafted user-supplied input. Processing that input causes a specific internal component to allocate memory without any upper bound, and the allocation occurs outside the scope of the existing memory accounting controls that were intended to constrain it. The resulting out-of-memory condition is fatal and terminates the affected node process, causing a denial of service. |
| Elasticsearch does not validate a size value taken from a user-supplied input before that value is used to reserve memory for an internal data structure. An authenticated user holding only read privileges can submit a single small crafted request to a product API endpoint that causes the node to attempt an excessively large allocation. The resulting memory exhaustion raises a fatal error that terminates the Elasticsearch node process, causing a denial of service for the affected node and degrading cluster health. The defect is not volumetric, so a single request is sufficient regardless of the heap size configured on the target node. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to a denial of service via Excessive Allocation (CAPEC-130). A user-supplied list of document fields accepted by the Kibana Playground for RAG feature was neither bounded in length nor de-duplicated before it was used to assemble the response for each matching document. A single crafted request could therefore make Kibana build a response far larger than the data it was derived from, and the resulting processing and memory pressure exhausts the resources of the Kibana instance. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to a denial of service via Excessive Allocation (CAPEC-130). A specially crafted request submitted by an authenticated user with minimal privileges to a validation capability of the Observability log analysis feature causes Kibana to perform an unbounded amount of concurrent work. This can exhaust the memory available to the Kibana process and make Kibana unavailable to all users until it is restarted. The severity of the outcome depends on the resources allocated to the deployment; on well-provisioned deployments a single request may cause degraded performance and elevated memory pressure rather than a full outage, but the request is inexpensive to repeat. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). A specially crafted, malformed payload submitted to a Kibana visualization feature by an authenticated user holding only low-privileged access is not correctly validated before use. Processing the request causes unbounded memory growth in the Kibana process, which is terminated by the host once available memory is exhausted. Kibana then becomes unavailable to all users until the service is restarted. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user with read-only privileges to the alerting feature could submit a specially crafted, malformed payload that causes the Kibana process to consume excessive resources. A single request is sufficient to leave Kibana unable to serve requests for all users until the process is restarted. |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to denial of service via Excessive Allocation (CAPEC-130). A query expression accepted by a connector reporting operation was processed without any limit on its size, and an oversized expression caused the Kibana process to spend an unbounded amount of time evaluating it. An authenticated user with read-only privileges was able to send a single request that left Kibana unable to serve any user until the process was restarted. |
| Gitea SSH Key Parser Denial of Service |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From 5.9.3 until 5.10.1, src/xmlparser/OrderedObjParser.js processes multiple DOCTYPE declarations within a single XML document and passes each declaration's entities through addInputEntities(). addInputEntities() resets maxTotalExpansions and maxExpandedLength every time it is called, allowing additional DOCTYPE declarations to repeatedly reset the configured entity-expansion limits during one parse operation. A crafted XML document can then cause excessive CPU use, event-loop blocking, memory exhaustion, and process termination. This issue is fixed in version 5.10.1. |
| Denial of Service via Unbounded io.ReadAll in NPM Package Tag Endpoint |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.dns.AbstractDnsRecord, io.netty.handler.codec.dns.DefaultDnsRecordDecoder.decodeRecord(), and io.netty.handler.codec.dns.DnsCodecUtil.decompressDomainName() failed to release retained or newly allocated ByteBuf objects when IDN.toASCII() or encodeDomainName() rejected a malformed domain name, allowing unauthenticated remote DNS packets to leak direct memory incrementally until denial of service. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process. |
| Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes
valid QUIC Initial packets for unknown destination connection IDs, it
can allocate and queue new incoming channels without enforcing any limit.
Impact summary: A remote peer that can make many Initial packets reach the
server listener faster than the application accepts connections, can cause the
memory allocated to store the per-channel state to grow without any limits,
potentially making the QUIC listener unavailable and causing Denial of Service.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The function that handles inbound QUIC packets uses
Connection-Id from the packet header to find an existing connection
(QUIC channel). If no existing connection is found and the packet
type is INITIAL, the function treats the packet as a new connection. It
allocates a new channel object and inserts it into a queue where it
waits to be accepted by the local application with SSL_accept(3ossl).
The memory occupied by these initial channel objects may grow
without bounds if the application is not able to call SSL_accept()
frequently enough to serve these inbound connection requests.
The issue is present since OpenSSL 3.5 when the QUIC server implementation
was added.
The fix introduces a limit for pending connections. The default limit is set
to 256 pending connections (waiting to be accepted by the local application).
Applications may change the default by calling SSL_set_value_uint(3ossl).
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a network attacker who can reach an etcd TLS listener can open many TCP connections and never send a ClientHello. In client/pkg/transport/listener_tls.go, each connection handled by tlsListener.acceptLoop spawns a goroutine that blocks indefinitely inside tls.Conn.Handshake() and remains tracked in the pending map. Unbounded goroutine and map growth can exhaust memory in the etcd process, causing loss of availability for the cluster and, when etcd backs Kubernetes, the control plane. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. |
